Panasonic WJ-HD220 manual Camera Recording Setup REC, Manual Recording Setup REC Setup

■Camera Recording Setup (REC

CAMERA SETUP)

Click CAMERA REC SETUP in the system setup window to open the menu.

This menu is provided for the purpose of saving disk space. Each camera channel can be recorded only when an alarm operates, while it will not be recorded in non-alarm status.

ALARM-ONLY:Records the camera channel only when the alarm operates.

REC: Records the camera channel regardless of alarm or non-alarm status.

■Manual Recording Setup (REC SETUP)

Manual recording will take effect when OFF (not INT or EXT) is selected in the Timer Mode Selection TIME REC window. The parameters for alarm recording will be applied except for the scheduled time zone if INT is selected.

Click the [REC SETUP] button on the setup control panel to open the window.

Refer to ● Recording Mode Setup PROG1-4 SETUP, NO. 1- 4 for operating procedures and available parameters.

■Trigger Action Setup (TRIGGER ACTION SETUP)

This menu appears when the [TRIGGER ACTION SETUP] button in the REC SETUP menu is clicked.

8Mode (MODE)

OFF: Disables alarm recording logging, and warning.

REC&ALARM: Enables alarm recording logging, and warning.

REC: Enables alarm recording, but disables warning.

8Camera Preset Position (PRESET)

When combination cameras are connected to VIDEO IN 1-4 on the rear panel and positions are specified beforehand, you can assign a position to cameras 1-4.

1-64:Moves the camera to the specified preset posi- tion.

HOME: Moves the camera to the home position.

––:Does not move the camera.

Note: Preset move will not function for cameras 5-8 or for cameras 1-4 if they are cameras other than com- bination cameras.

Click the [SET] button when the items have been set prop- erly.

62