System Setup System Setup | Panasonic WJ-HD220 instruction

●Camera Title (CAMERA TITLE)

Camera title and display position are specified for each camera.

CAMERA TITLE

CAM TITLE

POSI.

1OFF

2ON→ 2•••• R-LOWER

3ON→ 3•••• L-LOWER

4OFF

5OFF

6OFF

7OFF

8OFF

1.In the DISPLAY SETUP menu, move the cursor to CAM- ERA TITLEO, and press the JogDial to open the CAM- ERA TITLE menu.

2.Move the cursor to the camera you wish to program using the [D] or [C] button.

3.Select either ON or OFF with the JogDial. The default is ON for all cameras.

ON: Enables camera title display, title registration, and position selection.

OFF: Disables the camera title functions.

4.Press the JogDial (SET) to validate the selection.

When ON is selected, go to the following steps. The cursor moves to the title edit area.

When OFF is selected, return to step 2 above, or press the [SETUP/ESC] button to escape from the CAMERA TITLE menu.

5.<Editing>

5-1 Select a character for the digit with the JogDial. Each title is identical to the camera number: 1, 2, 3, and so forth as the default.

Available characters are as follows.

0 ~ 9 A ~ Z ! % &

( ) * – / : . ? ← → ↑ ↓ •

5-2 Press the JogDial to validate the selection for the digit.

The selected character is displayed on the digit, and the cursor goes to the right digit.

5-3 Press the [C] button to move the cursor back to the previous digit.

5-4 Repeat steps 5-1, 5-2 and 5-3 until all digits are entered.

5-5 Press the JogDial when the cursor is on the right end digit to validate the entered title. The cursor moves to the POSI. column.

Note: A bullet (centered dot) stands for a space used for deleting entered characters.

6.Select a display position with the JogDial.

The default setting for cameras 1, 2, 5, and 6 is R- LOWER, for cameras 3, 4, 7, and 8 R-UPPER.

R-LOWER:Displays the camera title in the lower right corner.

R-UPPER:Displays the camera title in the upper right corner.

L-LOWER:Displays the camera title in the lower left corner.

L-UPPER:Displays the camera title in the upper left corner.

Note: When the 9-split screen is displayed, the camera title position is fixed to R-LOWER.

7.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

■System Setup (SYSTEM SETUP)

There are two pages of the system setup. To turn a new page, continue to move the cursor with the [D] or [C] but- ton.

SYSTEM SETUP	(1 OF 2)
PASSWORD LOCK	OFF
ALL→	*****
OPERATION→	*****
KEYLOCK BUZZ	ON
SKIP ALM-RECALL	1PAGE
SIMUL REC&PLAY	ON
ALTER DETECT	OFF
DISK END MODE	CONTINUE
DISK END BUZZ	ON

SYSTEM SETUP (2 OF 2)

PLAY PRIORITY LOCAL

TIME ADJUST SETUPO

AUTO ERASING

OFF

RESOLUTION→ NORMAL→

HDD SAFETY MODE OFF