Panasonic WJ-HD220 Disk Capacity Warning HDD Full, Remote LED Remote LED, Disk Check HDD Check

Page 30

R-LOWER:Displays status in the lower right corner.

R-UPPER:Displays status in the upper right corner.

L-LOWER:Displays status in the lower left corner

L-UPPER:Displays status in the upper left corner.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Note: When the 9-split screen is displayed, the status posi- tion is fixed to R-LOWER.

●Disk Capacity Warning (HDD FULL)

The recorder monitors the disk capacity to warn the opera- tor that the available capacity is nearing its end when STOP is selected for DISK END MODE. There are two warning levels. First, the FULL indicator on the front panel blinks when the remaining capacity has reached the preset value. Finally, the buzzer beeps when the disk is full, provided that the DISK END BUZZER parameter in the SYSTEM SETUP is set to ON. At the same time, the FULL indicator turns on.

DISPLAY SETUP

CLOCK→ JAN15.04

11:05

TIME&DATE

DISP.TYPE1 24H

TIME&DATE

POSI.R-LOWER

TIME&DATE

EMB. OFF

STATUS DISP.

ON

STATUS POSI.

R-LOWER

HDD FULL

 

1%

REMOTE LED

 

ON

HDD CHECK

 

0:00

CAMERA TITLEO

 

1.Select the desired value with the JogDial. The default is 1 %.

1% - 99%: The FULL indicator blinks when the remain- ing capacity reaches the selected value.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

●Remote LED (REMOTE LED)

The remote LED on the front panel will indicate or ignore the remote controlled status of the recorder via the network.

DISPLAY SETUP

CLOCK→ JAN15.04

11:05

TIME&DATE

DISP.TYPE1 24H

TIME&DATE

POSI.R-LOWER

TIME&DATE

EMB. OFF

STATUS DISP.

ON

STATUS POSI.

R-LOWER

HDD FULL

 

1%

REMOTE LED

 

ON

HDD CHECK

 

0:00

CAMERA TITLEO

 

1.Select either ON or OFF with the JogDial. The default is OFF.

ON: REMOTE LED turns on when the network controls the recorder.

OFF: REMOTE LED is deactivated.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

●Disk Check (HDD CHECK)

S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) is activated or deactivated for HDD check.

DISPLAY SETUP

CLOCK→ JAN15.04

11:05

TIME&DATE

DISP.TYPE1 24H

TIME&DATE

POSI.R-LOWER

TIME&DATE

EMB. OFF

STATUS DISP.

ON

STATUS POSI.

R-LOWER

HDD FULL

 

1%

REMOTE LED

 

ON

HDD CHECK

 

0:00

CAMERA TITLEO

 

1.Select either ON or OFF with the JogDial. The default is OFF.

ON 0:00-23:00:The recorder checks the HDD at the specified time every day.

OFF: Check is deactivated.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Note: Recording will resume after a one-second inter- mission when HDD is checked.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating Instructions English Version Important Safety Instructions Contents Features PrefaceTrademarks Precautions Front View 6Error indicator Error 4HDD Access Indicator HDD5FULL Indicator Full 7Stop and Setup/Escape Button Stop SETUP/ESC@6Audio Out @7Video Out Video OUTRear View Installation Places to avoidAbout mounting Mounting in the Rack Connections & DIP SW Setting Basic SystemPS Data System Personal computers can access the WJ-HD220 via the network Network SystemConnection with the Monitors ALARM/REMOTE ConnectionConnection with the Camera Site System Camera ConnectionAlarm Connection Time Adjusting ConnectionExternal Recording Connection Serial Port Connections RS-232C ConnectionPS Data Connection 10/100BASE-T Port Connection Case 2 Exclusively with System ControllerSystem Mode Data Port TerminationTurning On the Power Setup ProceduresPrior to Setup Turning Off the PowerClosing WJ-HD220 Main Menu Buttons and Dials Used for SetupDisplaying WJ-HD220 Main Menu JogDial Counter-clockwise Decreases the parameterPROG2 Setup Menu TreeInitializing Settings for Network Setup Menu Initializing All Contents & Setup DataInitializing Setup Data InitializingTimer Recording Setup Timer REC Program 1-4 Setup PROG1-4Main Menu WJ-HD220 Main Menu Recording Mode Setup PROG1-4 SETUP, no Alarm Recording Mode Setup ALMPre-alarm Recording PRE ALM REC Camera Recording Setup CAM REC Setup Post-alarm Recording Post ALM REC Trigger Action Setup Trigger Action Setup Dynamic Recording Dynamic RECDisplay Setup Display Setup Manual Recording Setup RECExternally Specified Recording Mode EXT REC Setup Clock ClockStatus Display Status Disp Time & Date Position TIME&DATE PosiTime & Date Embedded TIME&DATE EMB Status Position Status PosiDisk Capacity Warning HDD Full Remote LED Remote LEDDisk Check HDD Check System Setup System Setup Camera Title Camera Title~ 9 a ~ Z ! % ? ← → ↑ ↓ Password Lock Setup Password Lock Keylock Buzzer Setup Keylock BuzzSkip Alarm Recall Setup Disk End Mode Setup Alteration Detection SetupSimultaneous Recording & Playback Simul REC&PLAY Auto Erasing Setup Play Priority Setup Play PriorityTime Adjust Setup Disk End Buzzer Disk END BuzzResolution Resolution HDD Safety Mode HDD Safety Mode Monitor Mode Monitor Mode Alarm Setup Alarm SetupAlarm Buzzer Alarm Buzz Video Motion Detection VMD SetupCommunication Setup Serial Port SetupProtocol Protocol Wait Time Wait Time Baud Rate Baud RateData Bit Data BIT Control Unit Address CTL-UNIT Address only for PS DataLine Speed Line Speed Network Setup Network SetupAlarm Data Alarm Data exclusive to PS Data Assignable numbersSwitcher Setup Switcher Setup Camera View Setup Camera View Setup Multiscreen Sequence Setup Multi SEQ SetupSpot Sequence Setup Spot SEQ Setup Available durations 2-30SSystem Information Language Language System Log System LOGSelecting the Spot Monitor Operating ProceduresOn the Spot Monitor Viewing a Single LiveZooming a Single Live On the Multiscreen MonitorSelecting the Multiscreen Monitor Viewing a Quad Live SequenceAlarm Input Alarm OutputResetting Alarm Suspending Alarm Input Alarm Log Recall & SearchInternal Timer Recording To Search for PlaybackTo Erase Log Power-on Recording Alarm RecordingManual Recording Skip Playback Alarm Search PlaybackNormal Playback Step PlaybackTime & Date Search Playback Picture record of a specified time and date is played backPassword Verification Enabling Button LockWJ-HD220 Browser PreparationsSystem Requirements DisplaySystem Expansion ConnectionDirect Connection with a PC Connection with a Client PC via HubMain Page and Control Panel About Picture QualityRecorder Status Displayed Quality Timer Setup Timer Setup WJ-HD220 SetupTo Access Setup Menus Timer Recording Timer RECRecording Mode Setup PROG1-4 NO.1-4 Setup Program Assignment Timer RECProgramming Program Setup Assignable programs PROG1 PROG4, OFFTrigger Action Setup Trigger Action Setup Camera Recording Setup REC Manual Recording Setup REC SetupCamera Preset Position Preset Time & Date Embedded TIME&DATE Clock Setup Clock SetupTime and Date Position TIME&DATE Position Status Display Status DisplayCamera Title Camera Title Alteration Detection Alter Detect Disk End Mode Disk END ModeTime Adjusting Time Adjusting Disk End Buzzer Disk END BuzzerVideo Motion Detector Setup VMD Setup VMD Area Setup VMD Area SetupBaud Rate Baud Rate Alarm Data Alarm DataProtocol Selection Protocol Select Data Bit Data BITCamera System Setup Only for PsdataDomain Name Service Domain Name Service Dynamic DNS Dynamic DNSSimple Network Management Protocol Spot-screen Sequence Setup Common Setup Common SetupMultiscreen Sequence Setup Camera View Setup Camera View SetupCamera Channel Camera CH Multi Sequence Setup MultiCamera View Setup Camera View Setup Time TimeSystem Information System Information Error Information FTP, SMTP, Ddns Network Configuration User Setup User SetupHost Setup Host Setup FTP Client Setup FTP Client Setup Basic Setup Basic SetupFTP Send by Periodic Timer FTP Send by Periodic Timer Set Mail Address SET Mail Address Mail Setup Mail SetupAlarm Mail Setup Alarm Mail Setup Delete Mail Address Delete Mail AddressLive Sequence Setup Live Sequence Setup Network Video SetupLive & Playback Image Setup Live & Play Image Setup Video Rate Video RateOperating WJ-HD220 Main Panel1End Button END Start Button Start0Start Time Display Area 2End Time Display AreaMain Control Panel Camera Control View Button Camera Control View PAN/TILT ControlAlarm List Http Download and Viewing Images Troubleshooting When accessing via the networkPhenomenon Cause What to do Specifications & Appendix Specifications Standard Accessories Remote Control from System Controller AppendixTime and date selection For Time&Date search Implement Time&DateSearch Transmission Command Response CommandRS-232C Communication Protocol Command Table Alarm ControlBasic Operation Setup Control Miscellaneous ControlData Log Control Media Control InquiryHDD Maintenance When to Maintain HDD Who to Maintain HDDPower-on Procedures When Full Indicator is Lit Resetting Disk End When Error Indicator is LitDisk Menu Abbreviation Status Required CapacityAuto-remove Removing Logical Link Remove Link Formatting HDD HDD FormatRestarting Restart NOW Formatting HDD Format SET DoneMail Contents Network Security WJ-HD220 Security FunctionFor More Security FTP Errors Network Error InformationSmtp Errors Type Message DetailsDdns Errors 102Ns0805-0 V8QA6335AN Imprimé en Chine
Top Page Image Contents