■Mail Setup (MAIL SETUP)
User Name (USER NAME)
Enter the user name of the sender’s account.
Password (PASSWORD)
Enter the password of the sender’s account.
Click the [SET] button.
8Set Mail Address (SET MAIL ADDRESS)
Enter from the keyboard, and click the [SET] button. A maximum of four addresses can be set.
8Delete Mail Address (DELETE MAIL ADDRESS)
Enter or select the address you wish to erase, and click the [DELETE] button.
Note: Use the VIEW.HTML to open the attached image and view it in the normal aspect. Otherwise, it will be vertically reduced to half size.
8Alarm Mail Setup (ALARM MAIL SETUP)
Sending Mail (SEND MAIL)
OFF: Does not send.
ON: Sends an
Attaching Alarm Image (ATTACH ALARM IMAGE)
OFF: Does not attach.
ON: Attaches the image of the alarmed channel to the mail.
SMTP Server Address (SMTP SERVER ADDRESS)
Enter the SMTP server name or its IP address where you wish to send a mail. The SMTP server name can be used only when DNS is set to “AUTO” or “MANUAL”.
Sender Address (FROM ADDRESS)
Enter from the keyboard.
POP3 Authentication (POP3 AUTHENTICATION)
ON: Enables authentication with POP3 before SMTP.
OFF: Does not use authentication.
POP3 Server Address (POP3 SERVER ADDRESS)
Enter the SMTP server name or its IP address where you wish to send a mail if POP3 authentication is set to ON. The server name can be used only when DNS is set to “AUTO” or “MANUAL”.
76