6.Assemble the optional HDD unit onto the bracket using the absorbers, sleeves, earth lug, and screws provided with the recorder.
AVSD
o.N ER S
7.Place the HDD unit on the chassis, and fix it with six screws.
8.Reinstall the fan cord and connector.
9.Connect the power cable and flat cable on the rear of the HDD unit.
10. Fix the top cover to the recorder with nine screws.
■Mounting in the Rack
1.Remove the four rubber feet by removing the five screws on the bottom of the unit.
Remove 5 rubber feet.
2.Place the rack mounting brackets on both sides of the unit and tighten with the six supplied screws (M3 x10).
Six screws (Supplied)
Fix the rack mounting brackets.
3.Install the unit with the rack mounting brackets in the rack by using four screws (not included).
Rack
12