Panasonic WJ-HD220 manual Language Language, System Log System LOG

●System Log (SYSTEM LOG)

The system log is displayed on the monitor with event num- bers, dates, times, and causes.

SYSTEM LOG (1 OF 10)

NO. DATE TIME CAU 99 FEB28.04 6:50:06 WR1 98 FEB28.04 5:23:51 HD1 97 FEB20.04 10:10:23 HD2 96 FEB15.04 23:50:42 RV1 95 FEB11.04 23:52:10 FLL 94 JAN31.04 19:43:32 TML 93 JAN30.04 19:50:14 LS1 92 JAN15.04 19:52:54 FL% 91 JAN10.04 10:40:22 TM4 90 JAN01.04 10:50:20 LS1

Abbreviation	Cause	Description
TML	Thermal error	Temperature exceeds the
		operating range.
WR1	Writing error	Writing error on HDD
WR2
RV1	HDD automati-	Master HDD
	cally removed
RV2		Slave HDD
HD1	S.M.A.R.T	Master HDD
	detects an
HD2		Slave HDD
	error on HDD.
FL%	HDD XX%	Warning, HDD is nearing to
		the end.
FLL	HDD FULL	HDD is FULL.
		Terminal alarm event was
TM*	ALM	logged, but no picture
		recorded. * = 1-8
VM*	VMD	VMD event was logged, but
		no picture recorded. * = 1-8
LS*	LOSS	Video input loss on channel
		# (*). * = 1-8
PC*	PC	PC alarm was logged, but
		no picture recorded. * = 1-8
		Power disconnection due to
POW	Power	electricity failure/trouble has
		been detected.
ERR	Error	Errors other than shown
		above

■Language (LANGUAGE)

Language selection is available for display on the multi- screen monitor and for HTML on the browser.

1.Move the cursor to LANGUAGE.

2.Select a language with the JogDial and press the JogDial.

The default is ENGLISH.

Available languages: ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH, RUSSIAN, CHINESE

Notes:

•When Russian or Chinese is selected, HTML will display in the selected language, but the multiscreen monitor will display in English. See the table below.

•The recorder will exit from the setup menu and automat- ically start rebooting after you change the language.

Options	Multiscreen Display	HTML Display
ENGLISH	English	English
FRANCAIS	French	French
DEUTSCH	German	German
ITALIANO	Italian	Italian
ESPANOL	Spanish	Spanish
RUSSIAN	English	Russian
CHINESE	English	Chinese

44