Panasonic WJ-HD220 manual System Information

Page 43

1.Move the cursor to the desired camera using the [D] or [C] button.

2.Select ON or OFF with the JogDial, and press the JogDial.

The default is ON.

ON: Live image of the channel is displayed.

OFF: Blackout image is displayed.

3.Repeat steps 1 and 2 until all channels are pro- grammed, or press the [SETUP/ESC] button to return to the SWITCHER SETUP menu,

Notes:

•Recording will be carried out regardless of this set- ting.

•The recorded images of the channel will be played back and displayed on the monitor even if OFF is selected.

●Secret View Setup (SECRET VIEW SETUP)

This will help to watch shoplifters without being recognized in a store where, for example, cameras and spot monitors are installed on the sales floors and a multiscreen monitor is installed in a control room. The spot monitor will black out its screen when the multi-screen monitor is switched to the single live mode to focus on the potential shoplifter.

The default setting is OFF.

ON: Enables the secret view function.

OFF: Disables the secret view function.

■System Information

(SYSTEM INFORMATION)

SYSTEM INFORMATION

HDD1 HOUR METER 10000H

HDD2 HOUR METER 10000H

HDD CAPACITY		XXX.XXG
DEFAULT→		SET→
SYSTEM	VERSION	X.XX
SYSTEM	LOGO

●HDD Hour Meter (HDD HOUR METER)

The meter shows how many hours each hard disk has been operated in playback, recording and idle. The built-in HDD needs replacement when the hour meter reads around 30 000 H.

●HDD Capacity (HDD CAPACITY)

The total usable capacity of the built-in hard disk is indicat- ed.

●Default (DEFAULT)

This enables the recorder to restore all setup data to the default values.

1.Press the JogDial to move the cursor to DEFAULT.

2.When the cursor is on SET→, press the JogDial again.

3.Select YES or NO with the JogDial, and press the JogDial.

The default is NO.

NO: Current setup data is retained.

YES: Current setup data is reset to the default values.

When all setup data are reset to the defaults, "SET DONE" is displayed for a few seconds and then changes to SET→.

Note: The recorder will restart when the network setup has been changed and the menu is closed.

●System Version (SYSTEM VERSION)

This line displays the version number of the installed sys- tem software. You will need the version number when updating the software.

43

Image 43

Contents Operating Instructions English Version Important Safety Instructions Contents Preface FeaturesTrademarks Precautions Front View 7Stop and Setup/Escape Button Stop SETUP/ESC 4HDD Access Indicator HDD5FULL Indicator Full 6Error indicator Error@7Video Out Video OUT @6Audio OutRear View Places to avoid InstallationAbout mounting Mounting in the Rack Basic System Connections & DIP SW SettingPS Data System Network System Personal computers can access the WJ-HD220 via the networkSystem Camera Connection ALARM/REMOTE ConnectionConnection with the Camera Site Connection with the MonitorsTime Adjusting Connection Alarm ConnectionExternal Recording Connection RS-232C Connection Serial Port ConnectionsPS Data Connection Case 2 Exclusively with System Controller 10/100BASE-T Port ConnectionData Port Termination System ModeTurning Off the Power Setup ProceduresPrior to Setup Turning On the PowerJogDial Counter-clockwise Decreases the parameter Buttons and Dials Used for SetupDisplaying WJ-HD220 Main Menu Closing WJ-HD220 Main MenuMenu Tree PROG2 SetupInitializing Initializing All Contents & Setup DataInitializing Setup Data Initializing Settings for Network Setup MenuProgram 1-4 Setup PROG1-4 Timer Recording Setup Timer RECMain Menu WJ-HD220 Main Menu Alarm Recording Mode Setup ALM Recording Mode Setup PROG1-4 SETUP, noPre-alarm Recording PRE ALM REC Dynamic Recording Dynamic REC Post-alarm Recording Post ALM RECTrigger Action Setup Trigger Action Setup Camera Recording Setup CAM REC SetupClock Clock Manual Recording Setup RECExternally Specified Recording Mode EXT REC Setup Display Setup Display SetupStatus Position Status Posi Time & Date Position TIME&DATE PosiTime & Date Embedded TIME&DATE EMB Status Display Status DispRemote LED Remote LED Disk Capacity Warning HDD FullDisk Check HDD Check Camera Title Camera Title System Setup System Setup~ 9 a ~ Z ! % ? ← → ↑ ↓ Keylock Buzzer Setup Keylock Buzz Password Lock Setup Password LockSkip Alarm Recall Setup Alteration Detection Setup Disk End Mode SetupSimultaneous Recording & Playback Simul REC&PLAY Disk End Buzzer Disk END Buzz Play Priority Setup Play PriorityTime Adjust Setup Auto Erasing SetupResolution Resolution HDD Safety Mode HDD Safety Mode Video Motion Detection VMD Setup Alarm Setup Alarm SetupAlarm Buzzer Alarm Buzz Monitor Mode Monitor ModeSerial Port Setup Communication SetupProtocol Protocol Control Unit Address CTL-UNIT Address only for PS Data Baud Rate Baud RateData Bit Data BIT Wait Time Wait TimeAssignable numbers Network Setup Network SetupAlarm Data Alarm Data exclusive to PS Data Line Speed Line SpeedSwitcher Setup Switcher Setup Available durations 2-30S Multiscreen Sequence Setup Multi SEQ SetupSpot Sequence Setup Spot SEQ Setup Camera View Setup Camera View SetupSystem Information System Log System LOG Language LanguageViewing a Single Live Operating ProceduresOn the Spot Monitor Selecting the Spot MonitorViewing a Quad Live Sequence On the Multiscreen MonitorSelecting the Multiscreen Monitor Zooming a Single LiveAlarm Output Alarm InputResetting Alarm Alarm Log Recall & Search Suspending Alarm InputTo Search for Playback Internal Timer RecordingTo Erase Log Alarm Recording Power-on RecordingManual Recording Step Playback Alarm Search PlaybackNormal Playback Skip PlaybackPicture record of a specified time and date is played back Time & Date Search PlaybackEnabling Button Lock Password VerificationWJ-HD220 Display PreparationsSystem Requirements BrowserConnection with a Client PC via Hub ConnectionDirect Connection with a PC System ExpansionAbout Picture Quality Main Page and Control PanelRecorder Status Displayed Quality Timer Recording Timer REC WJ-HD220 SetupTo Access Setup Menus Timer Setup Timer SetupAssignable programs PROG1 PROG4, OFF Program Assignment Timer RECProgramming Program Setup Recording Mode Setup PROG1-4 NO.1-4 SetupTrigger Action Setup Trigger Action Setup Manual Recording Setup REC Setup Camera Recording Setup RECCamera Preset Position Preset Status Display Status Display Clock Setup Clock SetupTime and Date Position TIME&DATE Position Time & Date Embedded TIME&DATECamera Title Camera Title Disk End Buzzer Disk END Buzzer Disk End Mode Disk END ModeTime Adjusting Time Adjusting Alteration Detection Alter DetectVMD Area Setup VMD Area Setup Video Motion Detector Setup VMD SetupData Bit Data BIT Alarm Data Alarm DataProtocol Selection Protocol Select Baud Rate Baud RateOnly for Psdata Camera System SetupDynamic DNS Dynamic DNS Domain Name Service Domain Name ServiceSimple Network Management Protocol Camera View Setup Camera View Setup Common Setup Common SetupMultiscreen Sequence Setup Spot-screen Sequence SetupTime Time Multi Sequence Setup MultiCamera View Setup Camera View Setup Camera Channel Camera CHSystem Information System Information Error Information FTP, SMTP, Ddns User Setup User Setup Network ConfigurationHost Setup Host Setup Basic Setup Basic Setup FTP Client Setup FTP Client SetupFTP Send by Periodic Timer FTP Send by Periodic Timer Delete Mail Address Delete Mail Address Mail Setup Mail SetupAlarm Mail Setup Alarm Mail Setup Set Mail Address SET Mail AddressVideo Rate Video Rate Network Video SetupLive & Playback Image Setup Live & Play Image Setup Live Sequence Setup Live Sequence SetupMain Panel Operating WJ-HD2202End Time Display Area Start Button Start0Start Time Display Area 1End Button ENDMain Control Panel PAN/TILT Control Camera Control View Button Camera Control ViewAlarm List Http Download and Viewing Images When accessing via the network TroubleshootingPhenomenon Cause What to do Specifications & Appendix Specifications Standard Accessories Appendix Remote Control from System ControllerFor Time&Date search Implement Time&Date Time and date selectionSearch Response Command Transmission CommandRS-232C Communication Protocol Alarm Control Command TableBasic Operation Miscellaneous Control Setup ControlData Log Control Inquiry Media ControlWhen to Maintain HDD Who to Maintain HDD HDD MaintenancePower-on Procedures When Error Indicator is Lit When Full Indicator is Lit Resetting Disk EndAbbreviation Status Required Capacity Disk MenuAuto-remove Formatting HDD HDD Format Removing Logical Link Remove LinkNOW Formatting HDD Format SET Done Restarting RestartMail Contents WJ-HD220 Security Function Network SecurityFor More Security Type Message Details Network Error InformationSmtp Errors FTP Errors102 Ddns ErrorsNs0805-0 V8QA6335AN Imprimé en Chine