Panasonic WJ-HD220 manual Time & Date Position TIME&DATE Posi, Time & Date Embedded TIME&DATE EMB

Page 29

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Notes:

When a 9-split screen is displayed, only TYPE1 24H is available.

If “TIME&DATE EMB.” is set to ON and a display type except OFF is selected, the type will be embedded in the recorded data. If OFF is selected, TYPE1 24H will be embedded in the data.

The embedded time and date are displayed, but the time and date display is hidden to avoid overlapping them when both are set to ON and a single playback is viewed.

Time & Date Position (TIME&DATE POSI.)

L-UPPERR-UPPER

JAN15.04 11:15:00

JAN15.04 11:15:00

Time & Date Embedded (TIME&DATE EMB.)

You can select either recording with time and date display embedded or not. The display position and type in the recorded data depend on the setups described above.

1.Select ON or OFF with the JogDial. The default is OFF.

ON: Time & date display is embedded.

OFF: Time & date display is not embedded.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Notes:

TYPE1 24H will be embedded in the recorded data if TIME&DATE DISP is set to OFF and TIME&DATE EMB. is set to ON.

The embedded time and date are displayed, but the time and date display is hidden to avoid overlapping them when both are set to ON and a single playback is viewed.

JAN15.04 11:15:00

JAN15.04 11:15:00

L-LOWERR-LOWER

1.Select a display position with the JogDial. The default is R-LOWER.

R-LOWER:Displays time & date in the lower right cor- ner.

R-UPPER:Displays time & date in the upper right cor- ner.

L-LOWER:Displays time & date in the lower left corner.

L-UPPER:Displays time & date in the upper left corner.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Notes:

When the 9-split screen is displayed, the time and date position is fixed to R-LOWER.

The time and date display will be embedded in the recorded data in the position specified here, if TIME&DATE EMB. is set to ON.

Status Display (STATUS DISP.)

1.Select ON or OFF with the JogDial. The default is ON.

ON: Status display is enabled.

OFF: Status display is disabled.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Status Position (STATUS POSI.)

L-UPPERR-UPPER

PLAY

PLAY

PLAY

PLAY

L-LOWER R-LOWER

1.Select a display position with the JogDial. The default is R-LOWER.

29

Image 29
Contents Operating Instructions English Version Important Safety Instructions Contents Trademarks FeaturesPreface Precautions Front View 5FULL Indicator Full 4HDD Access Indicator HDD6Error indicator Error 7Stop and Setup/Escape Button Stop SETUP/ESC@7Video Out Video OUT @6Audio OutRear View About mounting InstallationPlaces to avoid Mounting in the Rack Basic System Connections & DIP SW SettingPS Data System Network System Personal computers can access the WJ-HD220 via the networkConnection with the Camera Site ALARM/REMOTE ConnectionConnection with the Monitors System Camera ConnectionExternal Recording Connection Alarm ConnectionTime Adjusting Connection PS Data Connection Serial Port ConnectionsRS-232C Connection Case 2 Exclusively with System Controller 10/100BASE-T Port ConnectionData Port Termination System ModePrior to Setup Setup ProceduresTurning On the Power Turning Off the PowerDisplaying WJ-HD220 Main Menu Buttons and Dials Used for SetupClosing WJ-HD220 Main Menu JogDial Counter-clockwise Decreases the parameterMenu Tree PROG2 SetupInitializing Setup Data Initializing All Contents & Setup DataInitializing Settings for Network Setup Menu InitializingMain Menu WJ-HD220 Main Menu Timer Recording Setup Timer RECProgram 1-4 Setup PROG1-4 Pre-alarm Recording PRE ALM REC Recording Mode Setup PROG1-4 SETUP, noAlarm Recording Mode Setup ALM Trigger Action Setup Trigger Action Setup Post-alarm Recording Post ALM RECCamera Recording Setup CAM REC Setup Dynamic Recording Dynamic RECExternally Specified Recording Mode EXT REC Setup Manual Recording Setup RECDisplay Setup Display Setup Clock ClockTime & Date Embedded TIME&DATE EMB Time & Date Position TIME&DATE PosiStatus Display Status Disp Status Position Status PosiDisk Check HDD Check Disk Capacity Warning HDD FullRemote LED Remote LED ~ 9 a ~ Z ! % ? ← → ↑ ↓ System Setup System SetupCamera Title Camera Title Skip Alarm Recall Setup Password Lock Setup Password LockKeylock Buzzer Setup Keylock Buzz Simultaneous Recording & Playback Simul REC&PLAY Disk End Mode SetupAlteration Detection Setup Time Adjust Setup Play Priority Setup Play PriorityAuto Erasing Setup Disk End Buzzer Disk END BuzzResolution Resolution HDD Safety Mode HDD Safety Mode Alarm Buzzer Alarm Buzz Alarm Setup Alarm SetupMonitor Mode Monitor Mode Video Motion Detection VMD SetupProtocol Protocol Communication SetupSerial Port Setup Data Bit Data BIT Baud Rate Baud RateWait Time Wait Time Control Unit Address CTL-UNIT Address only for PS DataAlarm Data Alarm Data exclusive to PS Data Network Setup Network SetupLine Speed Line Speed Assignable numbersSwitcher Setup Switcher Setup Spot Sequence Setup Spot SEQ Setup Multiscreen Sequence Setup Multi SEQ SetupCamera View Setup Camera View Setup Available durations 2-30SSystem Information System Log System LOG Language LanguageOn the Spot Monitor Operating ProceduresSelecting the Spot Monitor Viewing a Single LiveSelecting the Multiscreen Monitor On the Multiscreen MonitorZooming a Single Live Viewing a Quad Live SequenceAlarm Output Alarm InputResetting Alarm Alarm Log Recall & Search Suspending Alarm InputTo Erase Log Internal Timer RecordingTo Search for Playback Manual Recording Power-on RecordingAlarm Recording Normal Playback Alarm Search PlaybackSkip Playback Step PlaybackPicture record of a specified time and date is played back Time & Date Search PlaybackEnabling Button Lock Password VerificationWJ-HD220 System Requirements PreparationsBrowser DisplayDirect Connection with a PC ConnectionSystem Expansion Connection with a Client PC via HubRecorder Status Displayed Quality Main Page and Control PanelAbout Picture Quality To Access Setup Menus WJ-HD220 SetupTimer Setup Timer Setup Timer Recording Timer RECProgramming Program Setup Program Assignment Timer RECRecording Mode Setup PROG1-4 NO.1-4 Setup Assignable programs PROG1 PROG4, OFFTrigger Action Setup Trigger Action Setup Camera Preset Position Preset Camera Recording Setup RECManual Recording Setup REC Setup Time and Date Position TIME&DATE Position Clock Setup Clock SetupTime & Date Embedded TIME&DATE Status Display Status DisplayCamera Title Camera Title Time Adjusting Time Adjusting Disk End Mode Disk END ModeAlteration Detection Alter Detect Disk End Buzzer Disk END BuzzerVMD Area Setup VMD Area Setup Video Motion Detector Setup VMD SetupProtocol Selection Protocol Select Alarm Data Alarm DataBaud Rate Baud Rate Data Bit Data BITOnly for Psdata Camera System SetupSimple Network Management Protocol Domain Name Service Domain Name ServiceDynamic DNS Dynamic DNS Multiscreen Sequence Setup Common Setup Common SetupSpot-screen Sequence Setup Camera View Setup Camera View SetupCamera View Setup Camera View Setup Multi Sequence Setup MultiCamera Channel Camera CH Time TimeSystem Information System Information Error Information FTP, SMTP, Ddns Host Setup Host Setup Network ConfigurationUser Setup User Setup FTP Send by Periodic Timer FTP Send by Periodic Timer FTP Client Setup FTP Client SetupBasic Setup Basic Setup Alarm Mail Setup Alarm Mail Setup Mail Setup Mail SetupSet Mail Address SET Mail Address Delete Mail Address Delete Mail AddressLive & Playback Image Setup Live & Play Image Setup Network Video SetupLive Sequence Setup Live Sequence Setup Video Rate Video RateMain Panel Operating WJ-HD2200Start Time Display Area Start Button Start1End Button END 2End Time Display AreaMain Control Panel PAN/TILT Control Camera Control View Button Camera Control ViewAlarm List Http Download and Viewing Images Phenomenon Cause What to do TroubleshootingWhen accessing via the network Specifications & Appendix Specifications Standard Accessories Appendix Remote Control from System ControllerSearch Time and date selectionFor Time&Date search Implement Time&Date RS-232C Communication Protocol Transmission CommandResponse Command Basic Operation Command TableAlarm Control Data Log Control Setup ControlMiscellaneous Control Inquiry Media ControlPower-on Procedures HDD MaintenanceWhen to Maintain HDD Who to Maintain HDD When Error Indicator is Lit When Full Indicator is Lit Resetting Disk EndAuto-remove Disk MenuAbbreviation Status Required Capacity Formatting HDD HDD Format Removing Logical Link Remove LinkNOW Formatting HDD Format SET Done Restarting RestartMail Contents For More Security Network SecurityWJ-HD220 Security Function Smtp Errors Network Error InformationFTP Errors Type Message Details102 Ddns ErrorsNs0805-0 V8QA6335AN Imprimé en Chine