Viewing 3D images on TV
You can enjoy 3D images by wearing the 3D Eyewear supplied with this TV and to view 3D broadcasts and 3D image software. Optional Accessories (p.8)
Basic features of 3D Eyewear
This product cannot be used as sunglasses.
This product can be worn over vision correction glasses.
Part names and functions
Infra-red receiver
Receives
The liquid crystal shutter open/close timing is controlled by receiving infra- red signals from the television, which provide 3D expression of the images. If the eyewear stops receiving
Power switch (bottom side of 3D Eyewear)
Switches on the 3D Eyewear power. The 3D Eyewear is turned on by setting the power switch to “ON”. Set the power switch to “OFF” to turn off the 3D Eyewear.
Liquid Crystal Shutter (lens)
Controls the images for 3D viewing.
The left and right liquid crystal shutters are alternately opened and closed in time with the left side and right side images that are alternately displayed on the television to achieve the 3D effect.
Charging port
Connect the charging cable. (p. 25)
Indicator lamp
Lights or flashes during use or charging to show the status of the rechargeable battery.
Battery status shown by indicator lamp
Power/indicator lamp status | Battery status |
Lights for 2 seconds when turned on | Sufficient battery level |
Flashes 5 times when turned on | Low battery level |
Flashes once every 2 seconds when in use | Operating normally |
Lights continuously when off | Charging |
Lamp off | Power off |
24