Panasonic TC-P55VT30 Edit the name of this TV, Select Viera network name, Select Software update

Network link

■Edit the name of this TV

Sets your favorite name for this TV. This name will be used to display the name of this TV on the screen of the other Network compatible equipment.

Select “VIERA network name”

Menu	Network link		select
	VIERA network name
	VIERA
	DLNA remote control
		Enable	OK
	DLNA remote volume control	Enable
	Network remote control
		Enable

Edit the name and press OK

Entering characters (p. 21)

■Switches DLNA remote control (Disable/Enable)

Switches DLNA remote control “Disable” or “Enable”

DLNA remote control	Enable
	select

■Volume setting in DMR operation (Disable/Enable)

Sets volume setting in DMR operation

•Available only when “Enable” is selected in “DLNA remote control”

DLNA remote volume control	Enable
	select

■Switches Network remote control (Disable/Enable)

Switches remote control of network device such as a smartphone to “Disable” or “Enable”.

Network remote control	Enable
	select

Network cameras list

Before using a Network camera, you need to register the camera as shown below. You can also set Default camera or Disconnect/Delete the registered cameras.

Press “Network cameras list” and display screen

Set Network camera setting

Network cameras list select

Start camera search.

●Before you start to search for a camera, switch the camera to registration mode.

●Search condition also depends on “Network settings”

Camera 1	BL-C210A	Connected	Default	Delete camera information.
Camera name	Model	Status
...	...	...
...	...	...		Disconnect to camera.
...	...	...
...	...	...		“Disconnected” will be displayed in “Status”.
...	...	...
...	...	...
...	...	...		Set to default use.
Select	OK
				Displayed “(Default)” next to camera name.
	RETURN

Find cameras	Delete	(Available only when reconnecting)
Disconnect	Default camera
●For this operation, please refer to the operating
		Connect to Camera. “Connect” will be displayed in
manual for the Network camera.		“Status”.

Software update

Select “Software update”

Menu	Network settings		select
	Connection test
	Network connection	Wireless (WiFi)	OK
	Wireless network
	IP address/DNS settings
	Network cameras list
	Software update
	Mac address	00-0b-97-7c-65-e9

Press OK to start the Software update screen Follow directions on the screen

●Set “Clock” first. (p. 17)

44