&6Electronic Zoom Button (EL-ZOOM)
Use this button to enter or exit the electronic zoom mode.
In the
&7Group Selection Button (GROUP SELECT)
Selects the camera group from among group 1, 2, 3 and 4.
The LED will light while any of the groups is selected.
&8Index Button (INDEX)
Displays the all record list (list and thumbnail) or alarm and emergency list depending on the status of the ALARM SEARCH button.
&9Alarm Search Button (ALARM SEARCH)
Selects either the list of alarm and emergency record- ings or all recordings to be displayed on the Multiscreen Monitor.
The LED indicates the status of selection as shown below.
On: Search records for alarm and emergency record- ings.
Off: Search records for all recordings.
Pressing this button in combination with the STOP but- ton will reset the activated alarm.
*0Display Button (DISPLAY)
Toggles the all title displays on the Multiscreen Monitor on and off, such as camera and group titles, operating status and so forth.
Pressing this button will also display the record list with the search editing area to find the record to be played back.
*1Link Indicator (LINK)
Is lit while the connection is established with the WJ- HD500A Disk Recorder.
*2Copy Button (COPY)
Copies the selected images on to the
*3Numeric Buttons (1 - 16)
Use these buttons to select the desired camera number while recording and playing back.
Entering the preset password with these buttons will release the button lock function.
*4Set Button (SET)
Use this button to select multiple records in the list for coping to the
*5Increment/Decrement Button (+, -)
Use these buttons to zoom in and out an image while the zoom mode is selected.
*6Direction Buttons (C D A B)
Use these buttons to select the desired area to be zoomed on the Multiscreen Monitor.
C: Downward
D: Upward
A: Left
B: Right
*7Stop Button (STOP)
Stops playback.
*8Record Button (RECORD)
Starts recording manually if applicable. The LED turns on to indicate that the recording mode is selected.
*9Playback/Pause Button (PLAY/PAUSE)
Pressing this button will start playback.
During playback, pressing this button will pause the playback.
The LED indicates the status as shown below.
On: Playback mode
Blinking: Pause mode
(0JogDial
Rotate in the pause mode to advance forward or reverse to the next recorded image.
Rotating the dial also selects the record number when the recorded list is displayed on the monitor.
(1Shuttle Ring
Rotate in the playback or the pause mode to search for- ward or reverse the recorded images at variable speed.
(2Recording Stop Button (REC STOP)
Pressing this button will stop the recording.
(3Remote Port (REMOTE)
Connect with the supplied modular cable to the WJ- HD500A Disk Recorder.
11