■Controlling the Multiscreen Monitor
The operations descried below are available on the Multiscreen Monitor.
●Selecting the Multiscreen Monitor
1.Select the Multiscreen Monitor by pressing the SPOT/MULTISCREEN button repeatedly.
The indicator in the button is off to indicate the Multiscreen monitor is selected.
SPOT
MULTISCREEN
2.In this condition, select the images to be displayed on the monitor screen by following the procedures below.
3.To select another image, press a numeric button (1 - 16) corresponding to the image.
The selected image appears on the monitor screen. The indicator on the button previously selected turns off and the indicator on the button currently selected lights up.
●Zooming Single Spot (Live)
While the image on the monitor screen is displayed in Single Spot mode, the image can be zoomed followed the procedure below.
1.Select an image to be zoomed on the monitor by press- ing a numeric button (1 - 16).
The indicator in the selected button lights up and the camera image corresponding to the button appears on the monitor screen.
●Single Spot (Live)
1.Select the input for all groups by pressing the GROUP SELECT button (indicator off).
Pressing this button toggles the group display on the monitor as shown below.
(The indicator in the button lights while any of the groups is selected.)
GROUP | G1: Group 1 | ||
G2: Group 2 | |||
SELECT | |||
|
| G3: Group 3 | |
|
| G4: Group 4 | |
|
| none: All Inputs | |
2.Select an image to be displayed on the monitor by pressing a numeric button (1 - 16).
The indicator on the selected button lights and the cam- era image corresponding to the button appears in the spot mode on the monitor screen.
2
2
2.Press the
EL-ZOOM
3.In the zoom mode, pressing the C, D, A, or B button will move the image in the direction of the button.
4.Pressing the + or - button will zoom the image as shown below.
+: Increases zoom in steps (x2 → | x4 → | x8) |
x4 → | x2) |
5.To cancel this mode, press the
81