$7Alarm Port (ALARM)
This port accepts the alarm input from the associated alarm sensors through either Normally Open or Normally Closed contacts.
The pin assignment of the port is shown below.
13 | 1 |
| 25 | ALARM | 14 | |
|
|
| ||
|
|
|
|
|
Pin | Designation |
| Pin | Designation |
No. |
| No. | ||
|
|
| ||
1 | Alarm Input 1 |
| 14 | Ground |
|
|
|
|
|
2 | Alarm Input 2 |
| 15 | Alarm Input 5 |
|
|
|
|
|
3 | Alarm Input 3 |
| 16 | Alarm Input 6 |
|
|
|
|
|
4 | Alarm Input 4 |
| 17 | Alarm Input 7 |
|
|
|
| |
5 | Sequence Timing Input | 18 | Alarm Input 8 | |
|
|
|
|
|
6 | Alarm Reset Output |
| 19 | Alarm Input 9 |
|
|
|
|
|
7 | Ground |
| 20 | Ground |
|
|
|
|
|
8 | Alarm Recover Input |
| 21 | +5 V Output (0.2 A) |
|
|
|
|
|
9 | Alarm Output |
| 22 | Recording Timer Select |
| Input | |||
|
|
|
|
|
10 | Alarm Input 10 |
| 23 | Alarm Input 14 |
|
|
|
|
|
11 | Alarm Input 11 |
| 24 | Alarm Input 15 |
|
|
|
|
|
12 | Alarm Input 12 |
| 25 | Alarm Input 16 |
|
|
|
|
|
13 | Alarm Input 13 |
|
|
|
|
|
|
|
|
$8Copy Port (COPY)
For connecting the optional DVD Extension Unit.
$9Mode Selector (MODE)
Selects data termination for PS• Data system expansion.
%0Data Port (DATA)
Exchanges control data with the external device with PS• Data (Panasonic Security Data) mode.
%1Remote Port [REMOTE (WV-CU50)]
This port is provided for controlling the Disk Recorder with the optional
To connect to the controller, use a
%2Gen-lock Output Connector (GEN-LOCK OUT)
This connector is used to connect an external system for synchronization.
To record images at maximum recording rate, for exam- ple 60 fps, connect this output to the cameras to syn- chronize the system.
%3Serial Port (SERIAL)
For connecting a Personal Computer.
%4Signal Ground Terminal (SIGNAL GND)
An optional Network Board can be installed in the Disk Recorder.
This port is used to exchange control data with Ethernet via an Ethernet Hub.
%6Cooling Fan
Prevents the temperature of the Recorder from rising. Do not block the ventilation opening on the cover.
%7AC Inlet Socket (AC IN)
Plug the power cord (supplied as a standard accesso- ry) into this socket and connect it to an AC outlet.
%8Power Switch (POWER ON/OFF)
This switch turns the power of the Disk Recorder on and off.
%9Video Output Connectors (VIDEO OUT 1 - 16)
The video signal connected to the Video Input Connector (VIDEO IN) is looped through these connec- tors with an automatic 75 Ω termination.
^0Video Input Connectors (VIDEO IN 1 - 16)
These connectors accept either a color or B/W compos- ite video signal from the camera.
9