Panasonic WJ-HD500A manual External Program Timer, Time Lapse Recording Internal Timer

Page 50

■External Program Timer

The internal timer can be changed to the specified timer previously programmed by the input from the external timer. This function is enabled, when a contact is connect- ed with pin 22 of the ALARM port.

This item lets you enable or disable the external timer for recording.

1.Move the cursor to the EXT REC MODE parameter in the TIMER REC SETUP menu by pressing the D or C button.

2.Select the desired program to be changed by pressing the + or - button.

PROG1 - 4: Selects a timer assigned program number.

---:Disables the external program timer.

The factory default setting is ---.

3.Press the SET button to display the assigned program number menu previously programmed.

If the program number menu has not been edited previ- ously, edit the assigned program number menu as described before.

4.Press the SETUP/ESC button to return to the previous setup menu.

■Time Lapse Recording (Internal Timer)

These items let you set the recording parameters for Time Lapse Recording assigned in the program number menu.

(Continued from Program Timer)

1.Select the recording mode T/L in the program number menu by pressing the + or - button, then press the SET button.

The selected Time Lapse Recording menu shown below appears on the monitor screen.

3-1-1-1 PROG1-NO1-G1 REC SETUP

T/L(TIME LAPSE)

TIMER

REC MODE

SF- 24H

REC

RATE

7.5FPS

QUALITY

SUPER FINE

TRIGGER ACTION

REC+ALM

EVENT REC MODE

SF- 24H

REC

RATE(MAX)

7.5FPS

REC

QUALITY

SUPER FINE

DURATION

10S

DYNAMIC REC

OFF

REC

RATE(BASE)

1FPS

AUTO COPY

OFF

2.Move the cursor to the TIMER REC MODE parameter in the menu by pressing the D or C button.

3.Select the recording time mode to be set by pressing the + or - button.

OFF: Disables normal recording and enables only alarm recording.

SF-✽✽H or SF-A*✽✽H:Selects the recording time mode in enhanced fine quality.

FQ-✽✽H or FQ-A*✽✽H:Selects the recording time mode in fine quality.

NQ-✽✽H or NQ-A*✽✽H:Selects the recording time mode in normal quality.

EX-✽✽H or EX-A*✽✽H:Selects the recording time mode in extended quality.

SP or SP-A*:Freely selectable

✽✽indicates the hours for recording time mode:

2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480, 720, 960, 1200, 1440, 2160, 2880, 3600, 4320, 6480, 8640

(parameter A* indicates recording with audio)

When the parameter SF/FQ/NQ/EX is selected for recording time, the recording rate and quality are auto- matically set according to the selected recording time.

Note: It may not be possible to set the recording time, depending on the remaining storage capacity of the hard disk.

The factory default setting is SF-24H.

4.If the parameter SP is selected for recording time, move the cursor to the REC RATE parameter by pressing the D or C button, then select a recording rate by pressing the + or - button.

1 - 60FPS: Records the selected number of freeze images every second.

0.5FPS: Records a freeze image every 2 seconds.

0.4FPS: Records a freeze image every 2.5 seconds.

0.3FPS: Records a freeze image every 3.3 seconds.

0.2FPS: Records a freeze image every 5 seconds.

0.1FPS: Records a freeze image every 10 seconds.

Notes:

•The maximum recording rate depends on the selected parameters in the COMMON SETUP menu as shown in the table.

FIELD/FRAME

CAMERA GENLOCK

REC RATE

FIELD

ON

60FPS

 

OFF

30FPS

FRAME 3DIM

ON

10FPS

ON

OFF

10FPS

FRAME 3DIM

ON

30FPS

OFF

OFF

15FPS

52

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Operating Instructions English Version Contents Reliable recording of events FeaturesPreface Easy image searchDo not drop metallic parts through slots PrecautionsFully charge up the backup battery Do not attempt to disassemble the applianceFront View 1Numeric Buttons 1 @4Alarm Search Button Alarm Search@8Setup/Escape Button SETUP/ESC 2Set Button SET$1Multiscreen Output Connector Multiscreen OUT #0Full Indicator Full#1Hard Disk Drive Indicator HDD $2Spot Output Connector Spot OUT2Gen-lock Output Connector GEN-LOCK OUT $7Alarm Port Alarm$9Mode Selector Mode 8Power Switch Power ON/OFFWV-CU50 Remote Controller Blinking Pause mode 0JogDial 9Alarm Search Button Alarm Search1Link Indicator Link 6Electronic Zoom Button EL-ZOOMInstallation Installing the Optional Hard DiskInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack System Expansion ConnectionsBasic System Shown below are examples of system connectionsConnection with the Monitors Connection with the Remote ControllerConnection with the Camera Sites Alarm Port Connection AlarmControl Port Connection Connection with the Uninterrupted Power Supply UPS Connection with Control outputScsi Connection Switch SettingConnection with the Extension Units ModeConnection with the DVD Extension Unit without HDD Switch SettingsConnection with the DVD Extension Unit Connection with the DVD Extension Unit with HDD Scsi ID=0 toMode Selector Setting Connection to PSData Compatible EquipmentSerial Port Connection 10/100BASE-T Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Status Display Monitors and DisplaysSpot and Multiscreen Monitor Time DisplayGroup Display Format Error orSystem Status Display Electronic Zoom DisplayManual Recorder Timer RecorderHard Disk Emergency RecorderDynamic Recording is set to OFF Time Lapse RecordingMulti Shot Recording One Shot Recording Dynamic Recording is set to ALM-ONLYSetup Procedures Setup Menu Displaying the Setup MenuDisplay Setup Communication Setup Programming Menu SetupSetup Timer Setting Recording Setup Timer Setting Video Pixels Resolution Recording SetupRecording Quality Setup Color Mode SettingCamera Assignment Group SetupGroup Title Setup SpaceShuttle Speed Setup Thumbnail Display SetupPlayback Mode Setup Recording of the Title Display→ Manual with Audio → Manual Without Audio → Hard Disk End SetupManual Recording Mode Setting Event Recording Manual Recording Alarm Active Mode Manual Recording Program TimerSpecial Day Timer External Program Timer Time Lapse Recording Internal TimerAlarm Active Mode Event RecordingMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Live Sequence Pattern Setting Multiplexer SetupSequence Setup Multiscreen Monitor Live SequenceSequence Timing Setting Quad Shift SettingQuad Pattern Setup Auto Skip Setting Sequence Setup Spot MonitorGroup Multi Sequence Setting Live Sequence Pattern SettingSequence Timing Setting Power on Setting Multiscreen MonitorPower on Setting Spot Monitor Secret View Setting Alarm Auto Reset Setting Alarm SetupAlarm Port Setting Alarm Output SettingVideo Motion Detector Setting Alarm Buzzer SettingVideo Loss Alarm Setting Alarm Mode on the Multiscreen Monitor Alarm Mode on the Spot MonitorDisplay Setting Multiscreen Monitor Display SetupCamera Title Setup Clock DisplayTitle Display Title Display Setting Spot MonitorAlarm Display Setting Status DisplayClock and Status Display Position Setting Title Display Position SettingUnit Address Setting Communication SetupPS Data Setup Baud RateParity Check Alarm DataInput Camera Number Setup Stop BitRS-232C Setup Network Setup Time Adjustment Setting System SetupClock Setup SET TimeUser Defined Setting Password Lock SettingBuzzer Setting Auto Button Locked SettingDisk Information Disk Space IndicatorDisk Management Error Report System InformationDVD Format DVD Drive SetupAlarm Recording Backup Disk Space Display Emergency Recording BackupDVD Disk End Setup Operating Procedures Selecting the Spot Monitor Controlling the Video Input and MonitorsControlling the Spot Monitor Single Spot LiveZooming Single Spot Live Controlling the Multiscreen MonitorSelecting the Multiscreen Monitor Group Single Sequence Live All Input Display with Quad Shift Off Multiscreen Spot LiveMultiscreen Select Multi Sequence Live All Input Display with Quad Shift On Group DisplayMulti Group setting Quad setting Group Multi SequenceAlarm Operation Alarm Control FunctionAlarm Input Manual Reset Alarm ResetAlarm Suspension Auto ResetRecording Internal Timer RecordingPower-on Time Lapse Recording Manual RecordingSet to ALM-ONLY Alarm RecordingAlarm Recording for Manual and Power-on Recording Time Lapse Recording Alarm Recording for Internal Timer ModesSet to ALM-MULTI Emergency Recording Stop PlaybackBasic Playback Forward or Backward searchJump search Alarm jump searchSearch Record Function Record ListTime & Date Search Alarm Log SearchDisplay Zooming Single Spot Playback Display on the MonitorSingle and Multiscreen Spot Playback Displaying Camera and Playback Image REC PreviewBackup Function JogDialDisplay Data Erase Function Auto Erase FunctionManual Erase Function Lock To release this function, follow the procedure belowButton Locked Function Playback of Backup Data General SpecificationsStandard Accessory Input and OutputPanasonic Canada Inc Addendum
Top Page Image Contents