Panasonic WJ-HD500A manual Multiscreen Spot Live, Multiscreen Select

Page 80

The indicator in the numeric button lights up and the camera image corresponding to the button appears on the monitor screen.

4.During the sequence, press the SEQUENCE button to pause the sequence that is being run on the monitor screen.

The indicator in the button blinks to indicate that the sequence is paused.

SEQUENCE

5.Press the SEQUENCE button to restart the sequence forward from the step that was previously paused by pressing the SEQUENCE button.

The indicator in the button changes to a steady light.

6.To return to Spot monitoring, select an assigned cam- era image to be displayed on the monitor by pressing a numeric button.

If you attempt to press any button other than the one assigned to the group, it will be ignored.

Notes:

You can also enable the Auto Skip function to skip any steps when no video signal is present.

Refer to the AUTO SKIP in the 5 - 1 SEQUENCE SETUP for further details.

The setting can be adjusted in such a way that the sequence step for displaying an image on the Spot Monitor screen in the single spot mode can be skipped automatically.

Refer to the SECRET VIEW in the 5 MULTIPLEXER SETUP for further details.

Multiscreen Spot (Live)

The monitor can display the camera images on a 4, 7, 9, 10, 13 and 16 multiscreen shown below.

1.Select the input for all groups (or one group) by press- ing the GROUP SELECT button.

Pressing this button toggles the group display on the monitor as shown below.

GROUP

G1: Group 1

G2: Group 2

SELECT

 

 

G3: Group 3

 

 

G4: Group 4

 

 

none: All Inputs

Note: Select All Inputs for displaying all camera images, otherwise only camera images assigned to a group are displayed on the monitor.

2.Select the screen segments to be displayed on the monitor by pressing the MULTISCREEN SELECT but- ton repeatedly.

MULTISCREEN

SELECT

Each time the MULTISCREEN SELECT button is pressed, the next group of 6 multiscreens available is displayed as follows.

The display pattern varies according to the selected input and setting; shown below is an example of a mon- itor display.

<All Input Display with Quad Shift Off>

1

 

2

3

4

 

 

1

 

2

1

 

 

 

 

2

5

 

6

7

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

10

11

12

 

 

3

 

4

3

 

 

4

 

5

13

14

15

16

 

 

 

 

 

6

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

1

 

2

1

 

2

 

3

 

2

3

 

 

 

 

 

 

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

5

 

6

6

 

7

8

9

3

 

4

5

 

6

 

 

 

 

 

 

 

 

 

 

 

 

7

 

8

 

9

10

11

12

13

 

7

 

8

9

 

10

 

 

83

Image 80
Contents Operating Instructions English Version Contents Features PrefaceReliable recording of events Easy image searchPrecautions Fully charge up the backup batteryDo not drop metallic parts through slots Do not attempt to disassemble the applianceFront View @4Alarm Search Button Alarm Search @8Setup/Escape Button SETUP/ESC1Numeric Buttons 1 2Set Button SET#0Full Indicator Full #1Hard Disk Drive Indicator HDD$1Multiscreen Output Connector Multiscreen OUT $2Spot Output Connector Spot OUT$7Alarm Port Alarm $9Mode Selector Mode2Gen-lock Output Connector GEN-LOCK OUT 8Power Switch Power ON/OFFWV-CU50 Remote Controller 9Alarm Search Button Alarm Search 1Link Indicator LinkBlinking Pause mode 0JogDial 6Electronic Zoom Button EL-ZOOMInstallation Installing the Optional Hard DiskInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack Connections Basic SystemSystem Expansion Shown below are examples of system connectionsConnection with the Monitors Connection with the Remote ControllerConnection with the Camera Sites Alarm Port Connection AlarmControl Port Connection Connection with the Uninterrupted Power Supply UPS Connection with Control outputSwitch Setting Connection with the Extension UnitsScsi Connection ModeConnection with the DVD Extension Unit without HDD Switch SettingsConnection with the DVD Extension Unit Connection with the DVD Extension Unit with HDD Scsi ID=0 toMode Selector Setting Connection to PSData Compatible EquipmentSerial Port Connection 10/100BASE-T Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Monitors and Displays Spot and Multiscreen MonitorStatus Display Time DisplayFormat Error or System Status DisplayGroup Display Electronic Zoom DisplayTimer Recorder Hard DiskManual Recorder Emergency RecorderDynamic Recording is set to OFF Time Lapse RecordingMulti Shot Recording One Shot Recording Dynamic Recording is set to ALM-ONLYSetup Procedures Setup Menu Displaying the Setup MenuDisplay Setup Communication Setup Programming Menu SetupSetup Timer Setting Recording Setup Timer Setting Recording Setup Recording Quality SetupVideo Pixels Resolution Color Mode SettingGroup Setup Group Title SetupCamera Assignment SpaceThumbnail Display Setup Playback Mode SetupShuttle Speed Setup Recording of the Title Display→ Manual with Audio → Manual Without Audio → Hard Disk End SetupManual Recording Mode Setting Event Recording Manual Recording Alarm Active Mode Manual Recording Program TimerSpecial Day Timer External Program Timer Time Lapse Recording Internal TimerAlarm Active Mode Event RecordingMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Multiplexer Setup Sequence Setup Multiscreen MonitorLive Sequence Pattern Setting Live SequenceSequence Timing Setting Quad Shift SettingQuad Pattern Setup Sequence Setup Spot Monitor Group Multi Sequence SettingAuto Skip Setting Live Sequence Pattern SettingSequence Timing Setting Power on Setting Multiscreen MonitorPower on Setting Spot Monitor Secret View Setting Alarm Setup Alarm Port SettingAlarm Auto Reset Setting Alarm Output SettingVideo Motion Detector Setting Alarm Buzzer SettingVideo Loss Alarm Setting Alarm Mode on the Multiscreen Monitor Alarm Mode on the Spot MonitorDisplay Setup Camera Title SetupDisplay Setting Multiscreen Monitor Clock DisplayTitle Display Setting Spot Monitor Alarm Display SettingTitle Display Status DisplayClock and Status Display Position Setting Title Display Position SettingCommunication Setup PS Data SetupUnit Address Setting Baud RateAlarm Data Input Camera Number SetupParity Check Stop BitRS-232C Setup Network Setup System Setup Clock SetupTime Adjustment Setting SET TimePassword Lock Setting Buzzer SettingUser Defined Setting Auto Button Locked SettingDisk Information Disk Space IndicatorDisk Management Error Report System InformationDVD Format DVD Drive SetupAlarm Recording Backup Disk Space Display Emergency Recording BackupDVD Disk End Setup Operating Procedures Controlling the Video Input and Monitors Controlling the Spot MonitorSelecting the Spot Monitor Single Spot LiveZooming Single Spot Live Controlling the Multiscreen MonitorSelecting the Multiscreen Monitor Group Single Sequence Live All Input Display with Quad Shift Off Multiscreen Spot LiveMultiscreen Select Multi Sequence Live All Input Display with Quad Shift On Group DisplayMulti Group setting Quad setting Group Multi SequenceAlarm Operation Alarm Control FunctionAlarm Input Alarm Reset Alarm SuspensionManual Reset Auto ResetInternal Timer Recording Power-on Time Lapse RecordingRecording Manual RecordingSet to ALM-ONLY Alarm RecordingAlarm Recording for Manual and Power-on Recording Time Lapse Recording Alarm Recording for Internal Timer ModesSet to ALM-MULTI Emergency Recording Playback Basic PlaybackStop Forward or Backward searchAlarm jump search Search Record FunctionJump search Record ListTime & Date Search Alarm Log SearchDisplay Zooming Single Spot Playback Display on the MonitorSingle and Multiscreen Spot Playback Displaying Camera and Playback Image REC PreviewBackup Function JogDialDisplay Data Erase Function Auto Erase FunctionManual Erase Function Lock To release this function, follow the procedure belowButton Locked Function Playback of Backup Data Specifications Standard AccessoryGeneral Input and OutputPanasonic Canada Inc Addendum