Panasonic WJ-HD500A manual Power on Setting Multiscreen Monitor, Power on Setting Spot Monitor

Page 58

6.Repeat the above steps 2 to 5 to set up the other steps.

7.When satisfied with all of the above steps, press the SETUP/ESC button to return to the previous SEQUENCE SETUP menu.

●Sequence Timing Setting

This item lets you select between internal and external con- trol for advancing the sequence on the Spot Monitor.

1.Move the cursor to the SEQ TIMING parameter in the SEQUENCE SETUP menu by pressing the D or C but- ton.

2.Select either INT or EXT by pressing the + or - but- ton.

INT: Advances a sequence by the Dwell Time that was programmed on the SPOT LIVE SEQUENCE SETUP.

EXT: Advances a sequence by the input from pin 5 of the ALARM port.

The factory default setting is INT.

●Auto Skip Setting

This item lets you enable or disable the auto skip function on the Spot Monitor to skip any steps when no video signal is present.

1.Move the cursor to the AUTO SKIP parameter in the SEQUENCE SETUP by pressing the D or C button.

2.Select either ON or OFF by pressing the + or - but- ton.

ON: Enables the auto skip function on the Spot Monitor.

OFF: Disables the auto skip function on the Spot Monitor.

The factory default setting is ON.

Power on Status Setup

The items let you select a pattern on the monitor screen when the Disk Recorder’s power is turned on.

■Power on Setting (Multiscreen Monitor)

This item lets you select a display pattern on the Multiscreen Monitor when the Disk Recorder’s power is turned on.

1.Move the cursor to the MULTI OUTPUT parameter in the MULTIPLEXER SETUP menu by pressing the D or C button.

2.Select a display pattern to be set by pressing the + or - button.

1 - 16: Selects an assigned camera image in single spot mode.

SPOT SEQ: Selects a sequence pattern programmed in the Live Sequence (Spot Monitor).

QUAD-4A to QUAD-4D:Selects an assigned quad dis- play in spot mode.

QUAD SEQ: Selects a sequence pattern programmed in the Live Sequence (Multiscreen Monitor).

7 to 16SCREEN: Selects a display with the assigned segment.

The factory default setting is QUAD-4A.

■Power on Setting (Spot Monitor)

This item lets you select a display pattern on the Spot Monitor when the Disk Recorder’s power is turned on.

1.Move the cursor to the SPOT OUTPUT parameter in the MULTIPLEXER SETUP menu by pressing the D or C button.

2.Select a display pattern to be set by pressing the + or - button.

1 - 16: Selects an assigned camera image in single spot mode.

SPOT SEQ: Selects a sequence pattern programmed in the Live Sequence (Spot Monitor).

The factory default setting is 1.

60

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Operating Instructions English Version Contents Reliable recording of events FeaturesPreface Easy image searchDo not drop metallic parts through slots PrecautionsFully charge up the backup battery Do not attempt to disassemble the applianceFront View 1Numeric Buttons 1 @4Alarm Search Button Alarm Search@8Setup/Escape Button SETUP/ESC 2Set Button SET$1Multiscreen Output Connector Multiscreen OUT #0Full Indicator Full#1Hard Disk Drive Indicator HDD $2Spot Output Connector Spot OUT2Gen-lock Output Connector GEN-LOCK OUT $7Alarm Port Alarm$9Mode Selector Mode 8Power Switch Power ON/OFFWV-CU50 Remote Controller Blinking Pause mode 0JogDial 9Alarm Search Button Alarm Search1Link Indicator Link 6Electronic Zoom Button EL-ZOOMInstallation Installing the Optional Hard DiskInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack System Expansion ConnectionsBasic System Shown below are examples of system connectionsConnection with the Camera Sites Connection with the Remote ControllerConnection with the Monitors Alarm Port Connection AlarmControl Port Connection Connection with the Uninterrupted Power Supply UPS Connection with Control outputScsi Connection Switch SettingConnection with the Extension Units ModeConnection with the DVD Extension Unit Switch SettingsConnection with the DVD Extension Unit without HDD Connection with the DVD Extension Unit with HDD Scsi ID=0 toMode Selector Setting Connection to PSData Compatible EquipmentSerial Port Connection 10/100BASE-T Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Status Display Monitors and DisplaysSpot and Multiscreen Monitor Time DisplayGroup Display Format Error orSystem Status Display Electronic Zoom DisplayManual Recorder Timer RecorderHard Disk Emergency RecorderMulti Shot Recording Time Lapse RecordingDynamic Recording is set to OFF One Shot Recording Dynamic Recording is set to ALM-ONLYSetup Procedures Setup Menu Displaying the Setup MenuSetup Timer Setting Recording Setup Programming Menu SetupDisplay Setup Communication Setup Timer Setting Video Pixels Resolution Recording SetupRecording Quality Setup Color Mode SettingCamera Assignment Group SetupGroup Title Setup SpaceShuttle Speed Setup Thumbnail Display SetupPlayback Mode Setup Recording of the Title DisplayManual Recording Mode Setting Hard Disk End Setup→ Manual with Audio → Manual Without Audio → Event Recording Manual Recording Alarm Active Mode Manual Recording Program TimerSpecial Day Timer External Program Timer Time Lapse Recording Internal TimerAlarm Active Mode Event RecordingMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Live Sequence Pattern Setting Multiplexer SetupSequence Setup Multiscreen Monitor Live SequenceQuad Pattern Setup Quad Shift SettingSequence Timing Setting Auto Skip Setting Sequence Setup Spot MonitorGroup Multi Sequence Setting Live Sequence Pattern SettingPower on Setting Spot Monitor Power on Setting Multiscreen MonitorSequence Timing Setting Secret View Setting Alarm Auto Reset Setting Alarm SetupAlarm Port Setting Alarm Output SettingVideo Loss Alarm Setting Alarm Buzzer SettingVideo Motion Detector Setting Alarm Mode on the Multiscreen Monitor Alarm Mode on the Spot MonitorDisplay Setting Multiscreen Monitor Display SetupCamera Title Setup Clock DisplayTitle Display Title Display Setting Spot MonitorAlarm Display Setting Status DisplayClock and Status Display Position Setting Title Display Position SettingUnit Address Setting Communication SetupPS Data Setup Baud RateParity Check Alarm DataInput Camera Number Setup Stop BitRS-232C Setup Network Setup Time Adjustment Setting System SetupClock Setup SET TimeUser Defined Setting Password Lock SettingBuzzer Setting Auto Button Locked SettingDisk Management Disk Space IndicatorDisk Information Error Report System InformationAlarm Recording Backup DVD Drive SetupDVD Format DVD Disk End Setup Emergency Recording BackupDisk Space Display Operating Procedures Selecting the Spot Monitor Controlling the Video Input and MonitorsControlling the Spot Monitor Single Spot LiveSelecting the Multiscreen Monitor Controlling the Multiscreen MonitorZooming Single Spot Live Group Single Sequence Live Multiscreen Select Multiscreen Spot LiveAll Input Display with Quad Shift Off Multi Sequence Live All Input Display with Quad Shift On Group DisplayMulti Group setting Quad setting Group Multi SequenceAlarm Input Alarm Control FunctionAlarm Operation Manual Reset Alarm ResetAlarm Suspension Auto ResetRecording Internal Timer RecordingPower-on Time Lapse Recording Manual RecordingAlarm Recording for Manual and Power-on Recording Alarm RecordingSet to ALM-ONLY Set to ALM-MULTI Alarm Recording for Internal Timer ModesTime Lapse Recording Emergency Recording Stop PlaybackBasic Playback Forward or Backward searchJump search Alarm jump searchSearch Record Function Record ListDisplay Alarm Log SearchTime & Date Search Single and Multiscreen Spot Playback Display on the MonitorZooming Single Spot Playback Displaying Camera and Playback Image REC PreviewBackup Function JogDialDisplay Data Erase Function Auto Erase FunctionManual Erase Function Button Locked Function To release this function, follow the procedure belowLock Playback of Backup Data General SpecificationsStandard Accessory Input and OutputPanasonic Canada Inc Addendum
Top Page Image Contents