Panasonic WJ-HD500A manual Basic Playback, Stop, Forward or Backward search

Page 89

PLAYBACK

The recorded images on the disk can be played back on the Multiscreen Monitor.

The procedures described below are for operations playing back the hard disk.

Refer to the PLAYBACK MODE or THUMBNAIL parameter in the COMMON SETUP menu for the play back setup.

Basic Playback

1.Select the group to be played back by pressing the GROUP SELECT button.

Note: Ensure to select one of groups for playing back when the recording was made in internal timer recording that is recorded images with a group unit.

2.Pressing the PLAY/PAUSE button will play back the most recent recordings in the forward direction.

The indicator in the button lights, and the selected images appear on the monitor screen.

(B) and recording number appear on the monitor screen to indicate that playback is selected.

BPLAY/ yPAUSE

Note: When the ALARM SEARCH button is on, the Disk Recorder plays back for alarm and emergency recordings on the Hard Disk.

3.Pressing the PLAY/PAUSE button during playback will pause playback.

The indicator in the button blinks and (y) appears on the monitor to indicate that playback pause is selected.

BPLAY/ yPAUSE

4.To resume playback, press the PLAY/PAUSE button. The indicator in the button lights again and (B) appears on the monitor screen.

5.To stop playback, press the STOP button.

The indicator in the PLAY/PAUSE button goes off, and the live images previously selected appear.

STOP

Forward or Backward search

The recorded images can be searched playing back at variable speeds.

During playback or playback pause, hold down the Shuttle Ring clockwise or counterclockwise to search images as shown below.

By rotating the ring angle the search speed can be controlled in either direction.

q1/2 times speed w 1 times speed e 2 times speed

r 5 (50, 100) times speed

Note: The search speed can be selectable by the set- ting when the Shuttle Ring is rotated maximally. Refer to SHUTTLE SPEED in the 1 COMMON SETUP for further details.

Clockwise: Search Forward

Counterclockwise: Search Backward

Forward or Backward field advance

The recorded images can be searched one-by-one, displaying field by field.

During playback pause, rotating the JogDial clockwise or counterclockwise to advance an image field by field as shown below.

 

 

w

 

 

w q q w

 

e

 

 

e

r

REV

FWD

r

 

 

Rotate

 

Clockwise: Forward Field Advance

Counterclockwise: Backward Field Advance

REV

FWD

Rotate

92

Image 89
Contents Operating Instructions English Version Contents Preface FeaturesReliable recording of events Easy image searchFully charge up the backup battery PrecautionsDo not drop metallic parts through slots Do not attempt to disassemble the applianceFront View @8Setup/Escape Button SETUP/ESC @4Alarm Search Button Alarm Search1Numeric Buttons 1 2Set Button SET#1Hard Disk Drive Indicator HDD #0Full Indicator Full$1Multiscreen Output Connector Multiscreen OUT $2Spot Output Connector Spot OUT$9Mode Selector Mode $7Alarm Port Alarm2Gen-lock Output Connector GEN-LOCK OUT 8Power Switch Power ON/OFFWV-CU50 Remote Controller 1Link Indicator Link 9Alarm Search Button Alarm SearchBlinking Pause mode 0JogDial 6Electronic Zoom Button EL-ZOOMInstalling the Optional Hard Disk InstallationInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack Basic System ConnectionsSystem Expansion Shown below are examples of system connectionsConnection with the Monitors Connection with the Remote ControllerConnection with the Camera Sites Alarm Alarm Port ConnectionControl Port Connection Connection with Control output Connection with the Uninterrupted Power Supply UPSConnection with the Extension Units Switch SettingScsi Connection ModeConnection with the DVD Extension Unit without HDD Switch SettingsConnection with the DVD Extension Unit Scsi ID=0 to Connection with the DVD Extension Unit with HDDConnection to PSData Compatible Equipment Mode Selector Setting10/100BASE-T Port Connection Serial Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Spot and Multiscreen Monitor Monitors and DisplaysStatus Display Time DisplaySystem Status Display Format Error orGroup Display Electronic Zoom DisplayHard Disk Timer RecorderManual Recorder Emergency RecorderDynamic Recording is set to OFF Time Lapse RecordingMulti Shot Recording Dynamic Recording is set to ALM-ONLY One Shot RecordingSetup Procedures Displaying the Setup Menu Setup MenuDisplay Setup Communication Setup Programming Menu SetupSetup Timer Setting Recording Setup Timer Setting Recording Quality Setup Recording SetupVideo Pixels Resolution Color Mode SettingGroup Title Setup Group SetupCamera Assignment SpacePlayback Mode Setup Thumbnail Display SetupShuttle Speed Setup Recording of the Title Display→ Manual with Audio → Manual Without Audio → Hard Disk End SetupManual Recording Mode Setting Event Recording Manual Recording Program Timer Alarm Active Mode Manual RecordingSpecial Day Timer Time Lapse Recording Internal Timer External Program TimerEvent Recording Alarm Active ModeMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Sequence Setup Multiscreen Monitor Multiplexer SetupLive Sequence Pattern Setting Live SequenceSequence Timing Setting Quad Shift SettingQuad Pattern Setup Group Multi Sequence Setting Sequence Setup Spot MonitorAuto Skip Setting Live Sequence Pattern SettingSequence Timing Setting Power on Setting Multiscreen MonitorPower on Setting Spot Monitor Secret View Setting Alarm Port Setting Alarm SetupAlarm Auto Reset Setting Alarm Output SettingVideo Motion Detector Setting Alarm Buzzer SettingVideo Loss Alarm Setting Alarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorCamera Title Setup Display SetupDisplay Setting Multiscreen Monitor Clock DisplayAlarm Display Setting Title Display Setting Spot MonitorTitle Display Status DisplayTitle Display Position Setting Clock and Status Display Position SettingPS Data Setup Communication SetupUnit Address Setting Baud RateInput Camera Number Setup Alarm DataParity Check Stop BitRS-232C Setup Network Setup Clock Setup System SetupTime Adjustment Setting SET TimeBuzzer Setting Password Lock SettingUser Defined Setting Auto Button Locked SettingDisk Information Disk Space IndicatorDisk Management System Information Error ReportDVD Format DVD Drive SetupAlarm Recording Backup Disk Space Display Emergency Recording BackupDVD Disk End Setup Operating Procedures Controlling the Spot Monitor Controlling the Video Input and MonitorsSelecting the Spot Monitor Single Spot LiveZooming Single Spot Live Controlling the Multiscreen MonitorSelecting the Multiscreen Monitor Group Single Sequence Live All Input Display with Quad Shift Off Multiscreen Spot LiveMultiscreen Select All Input Display with Quad Shift On Group Display Multi Sequence LiveGroup Multi Sequence Multi Group setting Quad settingAlarm Operation Alarm Control FunctionAlarm Input Alarm Suspension Alarm ResetManual Reset Auto ResetPower-on Time Lapse Recording Internal Timer RecordingRecording Manual RecordingSet to ALM-ONLY Alarm RecordingAlarm Recording for Manual and Power-on Recording Time Lapse Recording Alarm Recording for Internal Timer ModesSet to ALM-MULTI Emergency Recording Basic Playback PlaybackStop Forward or Backward searchSearch Record Function Alarm jump searchJump search Record ListTime & Date Search Alarm Log SearchDisplay Zooming Single Spot Playback Display on the MonitorSingle and Multiscreen Spot Playback REC Preview Displaying Camera and Playback ImageJogDial Backup FunctionDisplay Auto Erase Function Data Erase FunctionManual Erase Function Lock To release this function, follow the procedure belowButton Locked Function Playback of Backup Data Standard Accessory SpecificationsGeneral Input and OutputPanasonic Canada Inc Addendum