Display Setup, Camera Title Setup | Panasonic WJ-HD500A specs

DISPLAY SETUP

The procedure described below let you determine the dis- play such as the cameras title editing, display on and off and displays position on the monitors.

1.Move the cursor to DISPLAY SETUP in the WJ-HD500 SETUP menu by pressing the D or C button, then press the SET button.

The DISPLAY SETUP menu shown below appears on the monitor screen.

7 DISPLAY SETUP
CAMERA TITLE SETUP
MULTI OUTPUT
CLOCK DISPLAY	ON
TITLE DISPLAY	ON
STATUS DISPLAY	ON
BOADER LINE	WHITE
SPOT OUTPUT
TITLE DISPLAY	ON
ALARM DISPLAY	ON
CLOCK&STATUS POSITION	L-UPPER
TITLE POSITION	R-LOWER

2.Select an item or item parameter in the menu by press- ing the D or C button.

3.To return to the previous WJ-HD500 SETUP menu, press the SETUP/ESC button.

■Camera Title Setup

This item lets you edit the camera title to be displayed on the monitor screen.

Up to 8 alphanumeric characters can be displayed on the monitor screen.

1.Move the cursor to CAMERA TITLE SETUP in the DIS- PLAY SETUP menu by pressing the D or C button, then press the SET button.

The CAMERA TITLE SETUP menu shown below appears on the monitor screen.

7-1 CAMERA TITLE SETUP

CAM	TITLE	CAM	TITLE
1	1•••••••	9	9•••••••
2	2•••••••	10	10••••••
3	3•••••••	11	11••••••
4	4•••••••	12	12••••••
5	5•••••••	13	13••••••
6	6•••••••	14	14••••••
7	7•••••••	15	15••••••
8	8•••••••	16	16••••••

2.Move the cursor to the camera title editing area you want to edit by pressing the D, C, A or B button.

3.Select a character by pressing the + or - button.

The characters shown below can be selected in sequence.

Numeral: 0 1 2 3 4 5 6 7 8 9

Alphabet: A to Z, a to z

Symbols: ← → = ? ' " # $ % & ( ) * + , – . / : ;

Space: •

4.Move the cursor to the right in the editing area by pressing the B button, then select a character by pressing the + or - button.

5.Repeat the above steps to select characters until the title for a certain camera is completed.

6.If a wrong character is selected, move the cursor to the character to be replaced by pressing the A or B but- ton.

Select a character again by pressing the + or - but- ton.

7.Repeat the above procedures 2 to 6 to edit other cam- era titles.

8.When satisfied with all of the camera titles, press the SETUP/ESC button to return to the previous DISPLAY SETUP menu.

■Display Setting (Multiscreen Monitor)

These items let you determine the display mode of the Multiscreen Monitor.

●Clock Display

This item lets you enable or disable the clock display on the Multiscreen Monitor.

1.Move the cursor to the CLOCK DISPLAY parameter in the DISPLAY SETUP menu by pressing the D or C but- ton.

2.Select either ON or OFF by pressing the + or - but- ton.

ON: Enables the clock display on the monitor screen.

OFF: Disables the clock display on the monitor screen.

The factory default setting is ON.