MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■Front View
et yu !0 !1 !2!3!4!5!6!7 !8 !9 @0
ri o
|
|
|
|
|
|
|
|
|
| GROUP | STOP | BPLAY/ | PAUSE | REC | FS | 16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| REMOTE | ALARM | LOCK | 1 | 2 | 3 | 4 |
| REC STOP | SELECT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
| SET |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| ALARM | SPOT |
|
|
|
|
| REC PREVIEW | INDEX |
|
|
|
|
|
|
|
| MULTISCREEN | 5 | 6 | 7 | 8 |
| REV |
|
| FWD |
|
| |||
w | TIMER | RESET |
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| |||||||
|
| MULTISCREEN |
|
|
|
|
|
| ALARM SEARCH |
|
|
|
|
|
| |
|
| ALARM | SELECT | 9 | 10 | 11 | 12 |
|
|
|
|
|
|
| ||
|
| SUSPEND |
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| OPERATE | HDD | SEQUENCE |
|
|
|
| SETUP |
| DISPLAY |
|
|
|
|
|
|
q | 13 | 14 | 15 | 16 | /ESC | COPY |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| Digital Disk | ||||||
| FULL |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| DAYLIGHT SAVINGS |
|
|
|
|
| Recorder | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A | |
#1#0 @9 @8@7@6@5@4@3 @2@1
qOperate Indicator (OPERATE)
Is on when the power of the
wTimer Indicator (TIMER)
Lights to indicate when the TIMER is set to INT (internal timer) in the setup menu.
eRemote Indicator (REMOTE)
Lights to indicate when the Disk Recorder is controlled by an outboard device via the Serial or
rAlarm Suspend Indicator (ALARM SUSPEND)
Lights to indicate that the alarm suspension mode is selected.
tAlarm Reset Button (ALARM RESET) This button cancels an activated alarm.
Pressing this button will reset the alarm and return the system to the condition before the alarm function was activated.
yAlarm Indicator (ALARM)
This indicator blinks to indicate that an alarm condition exists.
It changes to a steady light when the alarm is reset automatically.
To turn the indicator off, press the ALARM RESET but- ton.
uSequence Button (SEQUENCE)
Runs the assigned sequence on the selected monitor screen for the specified duration.
During the sequence, pressing this button will pause the sequence that is being run on the monitor screen.
The LED indicates the status as follows.
On: Sequence is being run.
Blinking: Sequence is in pause mode.
iMultiscreen Selection Button
(MULTISCREEN SELECT)
Selects the multiscreen pattern to be displayed on the Multiscreen Monitor that is connected to the MULTI SCREEN OUT on the rear of the Recorder.
Pressing this button will toggle the display on the moni- tor screen as shown below.
4 → 7 → 9 → 10 → 13 → 16 → 4 screen segments
oMonitor Selection Button (SPOT/MULTISCREEN) Selects to control the display on the screen for either the Spot or Multiscreen Monitor.
Pressing this button will toggle the indicator in the but- ton on and off to indicate the selected monitor as shown below.
On: Indicates the Spot monitor is selected.
Off: Indicates the Multiscreen monitor is selected.
!0Lock Button (LOCK)
Toggles to enable or disable the button lock function on both front panels of the Disk Recorder and Remote Controller.
The LED indicates the status as shown below.
On: The button lock is enabled.
Off: The button lock is disabled.
While On, the button lock will be released only if the preset password is entered in the password inquiry win- dow.
6