Multiplexer Setup, Live Sequence | Panasonic WJ-HD500A manual

MULTIPLEXER SETUP

These items let you determine functions such as sequence and power on status for this Disk Recorder.

1.Select MULTIPLEXER SETUP in the WJ-HD500 SETUP menu by pressing the D or C button, then press the SET button.

The MULTIPLEXER SETUP menu as shown below appears on the monitor screen.

5 MULTIPLEXER SETUP
SEQUENCE	SETUP
POWER ON	MULTI OUTPUT	QUAD-4A
	SPOT OUTPUT	1
SECRET VIEW		OFF

2.Select an item or item parameter in the menu by press- ing the D or C button.

3.To return to the WJ-HD500 SETUP menu, press the SETUP/ESC button.

Sequence Setup

These items let you program the sequence pattern for the Spot and Multiscreen Monitor.

1.Move the cursor to SEQUENCE SETUP in the MULTI- PLEXER SETUP menu by pressing the D or C button, then press the SET button.

The SEQUENCE SETUP menu as shown below appears on the monitor screen.

5-1 SEQUENCE SETUP
MULTI	LIVE SEQUENCE SETUP
	QUAD SHIFT		OFF
	QUAD PATTERN SETUP
	SEQ	TIMING	INT
	GROUP	SEQ MODE	QUAD
	SEQ	DWELL	2S
	AUTO SKIP		ON
SPOT	LIVE SEQUENCE SETUP
	SEQ	TIMING	INT
	AUTO SKIP		ON

2.Select an item or item parameter in the SEQUENCE SETUP menu by pressing the D or C button.

3.To return to the previous MULTIPLEXER SETUP menu, press the SETUP/ESC button.

■Sequence Setup (Multiscreen Monitor)

There are three sequence patterns to run on the Multiscreen Monitor.

The items shown below let you program the sequence to run on the Multiscreen Monitor.

●Live Sequence

Live sequence is a series of 16 steps assigned to the Multiscreen Monitor.

The sequence steps can be combined with four screen segments (quad) display.

●Live Sequence Pattern Setting

1.Move the cursor to MULTI LIVE SEQUENCE SETUP in the SEQUENCE SETUP menu by pressing the D or C button, then press the SET button.

The menu shown below appears on the monitor screen.

5-1-1 MULTI LIVE SEQUENCE SETUP

		PRE-				PRE-
STEP	CAM	SET	SEC	STEP CAM		SET	SEC
1	4A	--	2S	9	--	--	0S
2	4B	--	2S	10	--	--	0S
3	4C	--	2S	11	--	--	0S
4	4D	--	2S	12	--	--	0S
5	--	--	0S	13	--	--	0S
6	--	--	0S	14	--	--	0S
7	--	--	0S	15	--	--	0S
8	--	--	0S	16	--	--	0S

2.Move the cursor to the step editing area by pressing the A, B, D or C button.

3.Select a camera to be displayed for CAM editing area by pressing the + or - button.

1 - 16: Displays the image of the selected camera num- ber.

4A - 4D: Displays the assigned images in quad. Refer to the QUAD PATTERN SETUP for settings.

--:Disables display and will skip automatically.

4.Move the cursor to the PRESET editing area by press- ing the B button, then select a preset position to be displayed by pressing the + or - button, if applica- ble.

1 - 64: Selects a preset position of the assigned cam- era.

--:No preset position

The factory default setting is --.