Panasonic WJ-HD500A manual Backup Function, JogDial

Page 94

BACKUP FUNCTION

The recorded images in the Disk Recorder can be stored on the DVD-RAM disk by copying the selected records when the system is equipped with the DVD Extension Unit.

Notes:

This function is only available when the optional DVD Drive Unit (procured locally) is connected to the COPY port on the rear of the Disk Recorder.

It is recommended to backup the recorded data in case of a malfunction or accident.

Follow the procedures described below to copy to the DVD-RAM disk.

1.Select the group to be played back by pressing the GROUP SELECT button.

2.Pressing the ALARM SEARCH button toggles the indi- cator in the button on and off.

Selecting either mode will display the list as shown below.

On: Displays only the Alarm and Emergency Record List of the selected group.

Off: Displays all Record Lists for the selected group.

3.Press the INDEX button to display the list selected on the Multiscreen Monitor as shown below.

Pressing the INDEX button will toggle the window between List and Thumbnail search.

The backup function is enabled only the list table is dis- played on the monitor.

• Record List

 

 

 

DATE MAY29.00

 

ALL GROUP

 

 

 

NO

GROUP

 

TIME

REC-MODE

 

000010009

G2

23:59:59

T/L

 

000010008

G1

22:15:40

M/S ALM-TRM12

INDEX

000010007

G3

21:00:07

O/S ALM-VMD3

000010006

ALL

17:33:05

T/L

 

000010005

ALL

7:23:11

T/L EMR

 

000010004

G4

6:59:44

M/S ALM-PC4

 

000010003

ALL

8:55:28

T/L MAN

 

000010002

G3

0:01:28

T/L ALM-TRM1

 

 

 

 

 

(TOTAL

2343RECORD)

 

 

 

 

 

 

 

 

SEARCH: MAY29.00

0:01 G1

 

 

 

ALARM # SEARCH:[DISPLAY]

 

 

 

 

SEL:←→

CHG:+–

EXE:SET

ESC:FSTOP

 

 

 

 

 

 

 

 

Search Editing Area

Note: The displayed list can be switched to the select- ed group by pressing the GROUP SELECT button.

4.Press the DISPLAY button to display the record list with the search (SEARCH) editing area as shown in the fig- ure.

DISPLAY

5.Move the cursor to the position to be edited in the search editing area by pressing the A, or B button.

6.Select the desired digit or month by pressing the + or

-button.

7.Repeat procedures 5 and 6 to edit the other positions.

8.Press the PLAY/PAUSE button to start the search.

A list of records including the most recent recording will appear on the monitor.

9.Rotate the JogDial clockwise or counterclockwise to move the cursor to the record to be stored on the disk.

Multiple records can be selected for storing as shown below.

Select a record on the table by rotating the JogDial, then press the SET button.

Select the next record on the table by rotating the

JogDial.

The records placed between can be selected for stor- ing by executing the following procedure.

10.Press the COPY button to start copying.

The display "COPYING" appears on the lower-left cor- ner in the menu.

 

DATE MAY29.00

 

ALL GROUP

 

NO

GROUP

TIME

REC-MODE

 

000010009

G2

23:59:59

T/L

 

000010008

G1

22:15:40

M/S ALM-TRM12

 

000010007

G3

21:00:07

O/S ALM-VMD3

 

000010006

ALL

17:33:05

T/L

COPY

000010005

ALL

7:23:11

T/L EMR

000010004

G4

6:59:44

M/S ALM-PC4

 

000010003

ALL

8:55:28

T/L MAN

 

000010002

G3

0:01:28

T/L ALM-TRM1

 

 

 

(TOTAL

2343RECORD)

COPYING MAY29.00 000003

PLAY:B ESC:FSTOP SEL:JOG

SEARCH:DISPLAY

11.When the copying is completed the display "COPY DONE!" appears in the menu.

DATE MAY29.00

 

ALL GROUP

NO

GROUP

TIME

REC-MODE

000010009

G2

23:59:59

T/L

000010008

G1

22:15:40

M/S ALM-TRM12

000010007

G3

21:00:07

O/S ALM-VMD3

000010006

ALL

17:33:05

T/L

000010005

ALL

7:23:11

T/L EMR

000010004

G4

6:59:44

M/S ALM-PC4

000010003

ALL

8:55:28

T/L MAN

000010002

G3

0:01:28

T/L ALM-TRM1

 

 

(TOTAL

2343RECORD)

COPY DONE! LEFT:20%

PLAY:B ESC:FSTOP SEL:JOG

SEARCH:DISPLAY

12.To quit copying, press the STOP button to exit from the menu.

97

Image 94
Contents Operating Instructions English Version Contents Reliable recording of events FeaturesPreface Easy image searchDo not drop metallic parts through slots PrecautionsFully charge up the backup battery Do not attempt to disassemble the applianceFront View 1Numeric Buttons 1 @4Alarm Search Button Alarm Search@8Setup/Escape Button SETUP/ESC 2Set Button SET$1Multiscreen Output Connector Multiscreen OUT #0Full Indicator Full#1Hard Disk Drive Indicator HDD $2Spot Output Connector Spot OUT2Gen-lock Output Connector GEN-LOCK OUT $7Alarm Port Alarm$9Mode Selector Mode 8Power Switch Power ON/OFFWV-CU50 Remote Controller Blinking Pause mode 0JogDial 9Alarm Search Button Alarm Search1Link Indicator Link 6Electronic Zoom Button EL-ZOOMInstallation Installing the Optional Hard DiskInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack System Expansion ConnectionsBasic System Shown below are examples of system connectionsConnection with the Camera Sites Connection with the Remote ControllerConnection with the Monitors Alarm Port Connection AlarmControl Port Connection Connection with the Uninterrupted Power Supply UPS Connection with Control outputScsi Connection Switch SettingConnection with the Extension Units ModeConnection with the DVD Extension Unit Switch SettingsConnection with the DVD Extension Unit without HDD Connection with the DVD Extension Unit with HDD Scsi ID=0 toMode Selector Setting Connection to PSData Compatible EquipmentSerial Port Connection 10/100BASE-T Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Status Display Monitors and DisplaysSpot and Multiscreen Monitor Time DisplayGroup Display Format Error orSystem Status Display Electronic Zoom DisplayManual Recorder Timer RecorderHard Disk Emergency RecorderMulti Shot Recording Time Lapse RecordingDynamic Recording is set to OFF One Shot Recording Dynamic Recording is set to ALM-ONLYSetup Procedures Setup Menu Displaying the Setup MenuSetup Timer Setting Recording Setup Programming Menu SetupDisplay Setup Communication Setup Timer Setting Video Pixels Resolution Recording SetupRecording Quality Setup Color Mode SettingCamera Assignment Group SetupGroup Title Setup SpaceShuttle Speed Setup Thumbnail Display SetupPlayback Mode Setup Recording of the Title DisplayManual Recording Mode Setting Hard Disk End Setup→ Manual with Audio → Manual Without Audio → Event Recording Manual Recording Alarm Active Mode Manual Recording Program TimerSpecial Day Timer External Program Timer Time Lapse Recording Internal TimerAlarm Active Mode Event RecordingMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Live Sequence Pattern Setting Multiplexer SetupSequence Setup Multiscreen Monitor Live SequenceQuad Pattern Setup Quad Shift SettingSequence Timing Setting Auto Skip Setting Sequence Setup Spot MonitorGroup Multi Sequence Setting Live Sequence Pattern SettingPower on Setting Spot Monitor Power on Setting Multiscreen MonitorSequence Timing Setting Secret View Setting Alarm Auto Reset Setting Alarm SetupAlarm Port Setting Alarm Output SettingVideo Loss Alarm Setting Alarm Buzzer SettingVideo Motion Detector Setting Alarm Mode on the Multiscreen Monitor Alarm Mode on the Spot MonitorDisplay Setting Multiscreen Monitor Display SetupCamera Title Setup Clock DisplayTitle Display Title Display Setting Spot MonitorAlarm Display Setting Status DisplayClock and Status Display Position Setting Title Display Position SettingUnit Address Setting Communication SetupPS Data Setup Baud RateParity Check Alarm DataInput Camera Number Setup Stop BitRS-232C Setup Network Setup Time Adjustment Setting System SetupClock Setup SET TimeUser Defined Setting Password Lock SettingBuzzer Setting Auto Button Locked SettingDisk Management Disk Space IndicatorDisk Information Error Report System InformationAlarm Recording Backup DVD Drive SetupDVD Format DVD Disk End Setup Emergency Recording BackupDisk Space Display Operating Procedures Selecting the Spot Monitor Controlling the Video Input and MonitorsControlling the Spot Monitor Single Spot LiveSelecting the Multiscreen Monitor Controlling the Multiscreen MonitorZooming Single Spot Live Group Single Sequence Live Multiscreen Select Multiscreen Spot LiveAll Input Display with Quad Shift Off Multi Sequence Live All Input Display with Quad Shift On Group DisplayMulti Group setting Quad setting Group Multi SequenceAlarm Input Alarm Control FunctionAlarm Operation Manual Reset Alarm ResetAlarm Suspension Auto ResetRecording Internal Timer RecordingPower-on Time Lapse Recording Manual RecordingAlarm Recording for Manual and Power-on Recording Alarm RecordingSet to ALM-ONLY Set to ALM-MULTI Alarm Recording for Internal Timer ModesTime Lapse Recording Emergency Recording Stop PlaybackBasic Playback Forward or Backward searchJump search Alarm jump searchSearch Record Function Record ListDisplay Alarm Log SearchTime & Date Search Single and Multiscreen Spot Playback Display on the MonitorZooming Single Spot Playback Displaying Camera and Playback Image REC PreviewBackup Function JogDialDisplay Data Erase Function Auto Erase FunctionManual Erase Function Button Locked Function To release this function, follow the procedure belowLock Playback of Backup Data General SpecificationsStandard Accessory Input and OutputPanasonic Canada Inc Addendum