Panasonic WJ-HD500A manual Monitors and Displays, Spot and Multiscreen Monitor, Status Display

Page 34

MONITORS AND DISPLAYS

■Spot and Multiscreen Monitor

The WJ-HD500A Disk Recorder can be connected to two Monitors.

The monitor displays the video signal according to the con- nection made, as shown below.

Spot Monitor: The monitor that is connected to the SPOT OUT connector on the rear of the Recorder. It only displays the video input in single spot or sin- gle sequence.

Displaying the Disk Recorder’s playback is dis- abled.

Multiscreen Monitor: The monitor that is connected to the MULTISCREEN OUT connector on the rear of the Recorder.

It can display the video input in multiscreen mode (4, 7, 9, 10, 13,16 screen segments).

It also displays the Recorder’s playback images. Pressing the SETUP/ESC button for two seconds or more will automatically select this monitor and dis- play the Disk Recorder’s Setup menu.

Note: When a Disk Recorder equipped with the optional WJ-HDB502 Network Board is accessed from a PC via a network, the Multi- screen Monitor screen will turn blue and will not display live camera images. The monitor screen will display the message "Controlled (Network)".

Pressing one of the numeric buttons (1 -

16)will display the selected camera images in a single spot. This function is not available when CAMERA GENLOCK ON is selected on the COMMON SETUP menu.

Disk Recorder

WJ-HD500A

SPOT

OUT

OUT

MULUTISCREEN

Spot Monitor

Multiscreen Monitor

■Status Display

The status display shows the system status of the Disk Recorder.

It is displayed on the screen of the Multiscreen Monitor dur- ing recording and playback and contains the following information.

The status display is only available on the screen of the Multiscreen Monitor.

Pressing the DISPLAY button toggles all displays on the monitor on and off.

(The Spot Monitor only displays the Group Title and Camera Title.)

q

 

 

 

 

 

 

 

 

 

 

 

 

y

 

 

 

 

 

 

 

 

 

 

 

 

w

 

 

 

 

 

 

 

 

 

 

 

 

u

 

 

 

 

 

 

 

 

 

 

 

e

 

 

 

 

 

!0

r

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

t

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

i o

qTime Display

Displays the hours (24-hour), minutes, and seconds. “✽” indicates that summer time mode is selected.

wDate Display

eRecording Status and Recording Number Display Displays the recording status and recording number currently being played back.

The recording number is automatically assigned when recording.

REC ✽✽%: Indicates that images are being recorded. (✽✽ indicates the remaining space of the Hard Disk when the HDD DISKEND is set to STOP in the setup menu.)

EMERGENCY: Indicates that an Emergency Recording is being made.

✽✽✽✽✽✽✽✽✽: Recording Number (during playback)

35

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Operating Instructions English Version Contents Reliable recording of events FeaturesPreface Easy image searchDo not drop metallic parts through slots PrecautionsFully charge up the backup battery Do not attempt to disassemble the applianceFront View 1Numeric Buttons 1 @4Alarm Search Button Alarm Search@8Setup/Escape Button SETUP/ESC 2Set Button SET$1Multiscreen Output Connector Multiscreen OUT #0Full Indicator Full#1Hard Disk Drive Indicator HDD $2Spot Output Connector Spot OUT2Gen-lock Output Connector GEN-LOCK OUT $7Alarm Port Alarm$9Mode Selector Mode 8Power Switch Power ON/OFFWV-CU50 Remote Controller Blinking Pause mode 0JogDial 9Alarm Search Button Alarm Search1Link Indicator Link 6Electronic Zoom Button EL-ZOOMInstallation Installing the Optional Hard DiskInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack System Expansion ConnectionsBasic System Shown below are examples of system connectionsConnection with the Camera Sites Connection with the Remote ControllerConnection with the Monitors Alarm Port Connection AlarmControl Port Connection Connection with the Uninterrupted Power Supply UPS Connection with Control outputScsi Connection Switch SettingConnection with the Extension Units ModeConnection with the DVD Extension Unit Switch SettingsConnection with the DVD Extension Unit without HDD Connection with the DVD Extension Unit with HDD Scsi ID=0 toMode Selector Setting Connection to PSData Compatible EquipmentSerial Port Connection 10/100BASE-T Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Status Display Monitors and DisplaysSpot and Multiscreen Monitor Time DisplayGroup Display Format Error orSystem Status Display Electronic Zoom DisplayManual Recorder Timer RecorderHard Disk Emergency RecorderMulti Shot Recording Time Lapse RecordingDynamic Recording is set to OFF One Shot Recording Dynamic Recording is set to ALM-ONLYSetup Procedures Setup Menu Displaying the Setup MenuSetup Timer Setting Recording Setup Programming Menu SetupDisplay Setup Communication Setup Timer Setting Video Pixels Resolution Recording SetupRecording Quality Setup Color Mode SettingCamera Assignment Group SetupGroup Title Setup SpaceShuttle Speed Setup Thumbnail Display SetupPlayback Mode Setup Recording of the Title DisplayManual Recording Mode Setting Hard Disk End Setup→ Manual with Audio → Manual Without Audio → Event Recording Manual Recording Alarm Active Mode Manual Recording Program TimerSpecial Day Timer External Program Timer Time Lapse Recording Internal TimerAlarm Active Mode Event RecordingMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Live Sequence Pattern Setting Multiplexer SetupSequence Setup Multiscreen Monitor Live SequenceQuad Pattern Setup Quad Shift SettingSequence Timing Setting Auto Skip Setting Sequence Setup Spot MonitorGroup Multi Sequence Setting Live Sequence Pattern SettingPower on Setting Spot Monitor Power on Setting Multiscreen MonitorSequence Timing Setting Secret View Setting Alarm Auto Reset Setting Alarm SetupAlarm Port Setting Alarm Output SettingVideo Loss Alarm Setting Alarm Buzzer SettingVideo Motion Detector Setting Alarm Mode on the Multiscreen Monitor Alarm Mode on the Spot MonitorDisplay Setting Multiscreen Monitor Display SetupCamera Title Setup Clock DisplayTitle Display Title Display Setting Spot MonitorAlarm Display Setting Status DisplayClock and Status Display Position Setting Title Display Position SettingUnit Address Setting Communication SetupPS Data Setup Baud RateParity Check Alarm DataInput Camera Number Setup Stop BitRS-232C Setup Network Setup Time Adjustment Setting System SetupClock Setup SET TimeUser Defined Setting Password Lock SettingBuzzer Setting Auto Button Locked SettingDisk Management Disk Space IndicatorDisk Information Error Report System InformationAlarm Recording Backup DVD Drive SetupDVD Format DVD Disk End Setup Emergency Recording BackupDisk Space Display Operating Procedures Selecting the Spot Monitor Controlling the Video Input and MonitorsControlling the Spot Monitor Single Spot LiveSelecting the Multiscreen Monitor Controlling the Multiscreen MonitorZooming Single Spot Live Group Single Sequence Live Multiscreen Select Multiscreen Spot LiveAll Input Display with Quad Shift Off Multi Sequence Live All Input Display with Quad Shift On Group DisplayMulti Group setting Quad setting Group Multi SequenceAlarm Input Alarm Control FunctionAlarm Operation Manual Reset Alarm ResetAlarm Suspension Auto ResetRecording Internal Timer RecordingPower-on Time Lapse Recording Manual RecordingAlarm Recording for Manual and Power-on Recording Alarm RecordingSet to ALM-ONLY Set to ALM-MULTI Alarm Recording for Internal Timer ModesTime Lapse Recording Emergency Recording Stop PlaybackBasic Playback Forward or Backward searchJump search Alarm jump searchSearch Record Function Record ListDisplay Alarm Log SearchTime & Date Search Single and Multiscreen Spot Playback Display on the MonitorZooming Single Spot Playback Displaying Camera and Playback Image REC PreviewBackup Function JogDialDisplay Data Erase Function Auto Erase FunctionManual Erase Function Button Locked Function To release this function, follow the procedure belowLock Playback of Backup Data General SpecificationsStandard Accessory Input and OutputPanasonic Canada Inc Addendum
Top Page Image Contents