Panasonic WJ-HD500A manual Mirroring Function

Page 31

MIRRORING FUNCTION

The mirroring function uses an auxiliary array of inexpen- sive disks to record the same data on two disks at the same time.

If an error or malfunction occurs on one of the hard disks, the other disk still records the data normally. This ensures reliability of the system, since the data will always be avail- able on one of the disks.

Camera Images

 

 

 

Auxiliary

 

Recording

 

Recording

 

 

 

 

 

Manual Recorder

Manual Recorder

 

Group 1

 

Group 1

Timer

Group 2

Timer

Group 2

Recorder

Group 3

Recorder

Group 3

 

 

 

Group 4

 

Group 4

Emergency Recorder

Emergency Recorder

WJ-HD500 Disk 1 (Master)

WJ-HD500 Disk 2 (Slave)

To use this function, the Disk Recorder must be equipped with an optional internal hard disk. Refer to the installation for details of installing the disk.

Note: It is recommended to set up this function when the Disk Recorder is operated for the first time. Otherwise the previously recorded data will be erased by activating this function.

The mirroring function can only be set during the power up procedure, as shown below.

1.Turn on the Disk recorder by pressing the POWER switch located on the rear of the Disk Recorder. Make sure that the OPERATE indicator on the front panel is illuminated.

2.After you completed the start, the Disk Recorder will run through a series of instructions for the system on the Multiscreen Monitor.

[ SYSTEM CHECK ]

PLEASE WAIT

3.If the Disk Recorder is powered up successfully, the displays as shown below will appear.

Press the SETUP/ESC button within five seconds, and the DISK MENU shown below will appear on the moni- tor.

[ SYSTEM CHECK ]

SYSTEM CHECK DONE!

PLEASE WAIT

DISK MENU: [SETUP] KEY

DISK MENU

 

 

 

MAIN 1:¢¢GB 2:¢¢GB

 

 

EXT5 1:¢¢GB 2:¢¢GB

3:¢¢GB 4:¢¢GB

EXT4

1:*

2:*

3:ADD

4:ADD

EXT3

1:LOST

2:LOST

3:LOST

4:LOST

EXT2

1:LOST

2:LOST

3:LOST

4:LOST

EXT1

1:-

2:-

3:-

4:-

EXT0

1:-

2:-

3:-

4:-

EXT DVD:-

REMOVE FORMAT

RESTART

SELECT ITEM AND PRESS [SET] KEY

4.Move the cursor to “FORMAT” on the table by pressing the A, B, D or C button, then press the SET button. The FORMAT MENU will appear on the monitor.

FORMAT MENU

 

 

 

MAIN 1:¢¢GB 2:¢¢GB

 

 

EXT5 1:¢¢GB 2:¢¢GB

3:¢¢GB 4:¢¢GB

EXT4

1:ADD

2:ADD

3:ADD

4:ADD

EXT3

1:-

2:-

3:-

4:-

EXT2

1:-

2:-

3:-

4:-

EXT1

1:-

2:-

3:-

4:-

EXT0

1:-

2:-

3:-

4:-

EXT DVD:-

PASSWORDB-----

32

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Operating Instructions English Version Contents Easy image search FeaturesPreface Reliable recording of eventsDo not attempt to disassemble the appliance PrecautionsFully charge up the backup battery Do not drop metallic parts through slotsFront View 2Set Button SET @4Alarm Search Button Alarm Search@8Setup/Escape Button SETUP/ESC 1Numeric Buttons 1$2Spot Output Connector Spot OUT #0Full Indicator Full#1Hard Disk Drive Indicator HDD $1Multiscreen Output Connector Multiscreen OUT8Power Switch Power ON/OFF $7Alarm Port Alarm$9Mode Selector Mode 2Gen-lock Output Connector GEN-LOCK OUTWV-CU50 Remote Controller 6Electronic Zoom Button EL-ZOOM 9Alarm Search Button Alarm Search1Link Indicator Link Blinking Pause mode 0JogDialInstalling the Optional Hard Disk InstallationInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack Shown below are examples of system connections ConnectionsBasic System System ExpansionConnection with the Camera Sites Connection with the Remote ControllerConnection with the Monitors Alarm Alarm Port ConnectionControl Port Connection Connection with Control output Connection with the Uninterrupted Power Supply UPSMode Switch SettingConnection with the Extension Units Scsi ConnectionConnection with the DVD Extension Unit Switch SettingsConnection with the DVD Extension Unit without HDD Scsi ID=0 to Connection with the DVD Extension Unit with HDDConnection to PSData Compatible Equipment Mode Selector Setting10/100BASE-T Port Connection Serial Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Time Display Monitors and DisplaysSpot and Multiscreen Monitor Status DisplayElectronic Zoom Display Format Error orSystem Status Display Group DisplayEmergency Recorder Timer RecorderHard Disk Manual RecorderMulti Shot Recording Time Lapse RecordingDynamic Recording is set to OFF Dynamic Recording is set to ALM-ONLY One Shot RecordingSetup Procedures Displaying the Setup Menu Setup MenuSetup Timer Setting Recording Setup Programming Menu SetupDisplay Setup Communication Setup Timer Setting Color Mode Setting Recording SetupRecording Quality Setup Video Pixels ResolutionSpace Group SetupGroup Title Setup Camera AssignmentRecording of the Title Display Thumbnail Display SetupPlayback Mode Setup Shuttle Speed SetupManual Recording Mode Setting Hard Disk End Setup→ Manual with Audio → Manual Without Audio → Event Recording Manual Recording Program Timer Alarm Active Mode Manual RecordingSpecial Day Timer Time Lapse Recording Internal Timer External Program TimerEvent Recording Alarm Active ModeMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Live Sequence Multiplexer SetupSequence Setup Multiscreen Monitor Live Sequence Pattern SettingQuad Pattern Setup Quad Shift SettingSequence Timing Setting Live Sequence Pattern Setting Sequence Setup Spot MonitorGroup Multi Sequence Setting Auto Skip SettingPower on Setting Spot Monitor Power on Setting Multiscreen MonitorSequence Timing Setting Secret View Setting Alarm Output Setting Alarm SetupAlarm Port Setting Alarm Auto Reset SettingVideo Loss Alarm Setting Alarm Buzzer SettingVideo Motion Detector Setting Alarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorClock Display Display SetupCamera Title Setup Display Setting Multiscreen MonitorStatus Display Title Display Setting Spot MonitorAlarm Display Setting Title DisplayTitle Display Position Setting Clock and Status Display Position SettingBaud Rate Communication SetupPS Data Setup Unit Address SettingStop Bit Alarm DataInput Camera Number Setup Parity CheckRS-232C Setup Network Setup SET Time System SetupClock Setup Time Adjustment SettingAuto Button Locked Setting Password Lock SettingBuzzer Setting User Defined SettingDisk Management Disk Space IndicatorDisk Information System Information Error ReportAlarm Recording Backup DVD Drive SetupDVD Format DVD Disk End Setup Emergency Recording BackupDisk Space Display Operating Procedures Single Spot Live Controlling the Video Input and MonitorsControlling the Spot Monitor Selecting the Spot MonitorSelecting the Multiscreen Monitor Controlling the Multiscreen MonitorZooming Single Spot Live Group Single Sequence Live Multiscreen Select Multiscreen Spot LiveAll Input Display with Quad Shift Off All Input Display with Quad Shift On Group Display Multi Sequence LiveGroup Multi Sequence Multi Group setting Quad settingAlarm Input Alarm Control FunctionAlarm Operation Auto Reset Alarm ResetAlarm Suspension Manual ResetManual Recording Internal Timer RecordingPower-on Time Lapse Recording RecordingAlarm Recording for Manual and Power-on Recording Alarm RecordingSet to ALM-ONLY Set to ALM-MULTI Alarm Recording for Internal Timer ModesTime Lapse Recording Emergency Recording Forward or Backward search PlaybackBasic Playback StopRecord List Alarm jump searchSearch Record Function Jump searchDisplay Alarm Log SearchTime & Date Search Single and Multiscreen Spot Playback Display on the MonitorZooming Single Spot Playback REC Preview Displaying Camera and Playback ImageJogDial Backup FunctionDisplay Auto Erase Function Data Erase FunctionManual Erase Function Button Locked Function To release this function, follow the procedure belowLock Playback of Backup Data Input and Output SpecificationsStandard Accessory GeneralPanasonic Canada Inc Addendum
Top Page Image Contents