Panasonic WJ-HD500A manual Group Single Sequence Live

Page 79

Single Sequence (Live)

A series of camera images can be displayed in succession on the monitor screen for the specified duration.

Refer to the 5 - 1 - 3 SPOT LIVE SEQUENCE SETUP for fur- ther details.

1.Select the input mode for all groups by pressing the GROUP SELECT button (indicator off).

Pressing this button toggles the group display on the monitor as shown below.

(The indicator in the button lights while any of the groups is selected.)

GROUP

G1: Group 1

G2: Group 2

SELECT

 

 

G3: Group 3

 

 

G4: Group 4

 

 

none: All Inputs

2.Select one of the images by pressing the numeric but- ton (1 - 16).

The indicator in the selected button lights and the cam- era image corresponding to the button appears in the spot mode on the monitor screen.

3.Press the SEQUENCE button to run the assigned sequence forward on the monitor screen.

The indicator in the button lights to indicate that the sequence mode is selected.

SEQUENCE

12

163

The indicator in the numeric button lights up and the camera image corresponding to the button appears on the monitor screen.

4.During the sequence, press the SEQUENCE button to pause the sequence that is being run on the monitor screen.

The indicator in the button blinks to indicate the sequence is paused.

SEQUENCE

5.Press the SEQUENCE button to restart the sequence forward from the step that was previously paused by pressing the SEQUENCE button.

The indicator in the button changes to a steady light.

6.To return to Spot monitoring, select an image to be dis- played on the monitor by pressing a numeric button (1 - 16).

Notes:

You can also enable the Auto Skip function to skip any steps when no video signal is present.

Refer to AUTO SKIP in the 5 - 1 SEQUENCE SETUP for further details.

The setting can be adjusted in such a way that the sequence step for displaying an image on the Spot Monitor screen in the single spot mode can be skipped automatically.

Refer to the SECRET VIEW in the 5 MULTIPLEXER SETUP for further details.

Group Single Sequence (Live)

An assigned group camera image can be displayed in suc- cession on the monitor screen for the specified duration. Refer to GROUP SEQ in the 5 - 1 SEQUENCE SETUP for further details.

1.Select the group to be displayed by pressing the GROUP SELECT button (indicator on).

Pressing this button toggles the group display and seg- ment images on the monitor as shown below.

GROUP

1

 

2

 

G1: Group 1

 

 

G2: Group 2

SELECT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G3: Group 3

 

 

 

 

3

4

 

 

5

G4: Group 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

none: All Inputs

2.Select one of the images by pressing the correspond- ing numeric button; the indicator in the button lights up. The indicator in the selected button lights and the cam- era image corresponding to the button appears in the spot mode on the monitor screen.

2

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

3.Press the SEQUENCE button to run the sequence for- ward on the monitor screen.

The indicator in the button lights to indicate that the sequence mode is selected.

SEQUENCE

12

5

4

3

82

Image 79
Contents Operating Instructions English Version Contents Easy image search FeaturesPreface Reliable recording of eventsDo not attempt to disassemble the appliance PrecautionsFully charge up the backup battery Do not drop metallic parts through slotsFront View 2Set Button SET @4Alarm Search Button Alarm Search@8Setup/Escape Button SETUP/ESC 1Numeric Buttons 1$2Spot Output Connector Spot OUT #0Full Indicator Full#1Hard Disk Drive Indicator HDD $1Multiscreen Output Connector Multiscreen OUT8Power Switch Power ON/OFF $7Alarm Port Alarm$9Mode Selector Mode 2Gen-lock Output Connector GEN-LOCK OUTWV-CU50 Remote Controller 6Electronic Zoom Button EL-ZOOM 9Alarm Search Button Alarm Search1Link Indicator Link Blinking Pause mode 0JogDialInstalling the Optional Hard Disk InstallationInstalling the Optional Motion Detector Board Installing the Optional Network Board Mounting into the Rack Shown below are examples of system connections ConnectionsBasic System System ExpansionConnection with the Camera Sites Connection with the Remote ControllerConnection with the Monitors Alarm Alarm Port ConnectionControl Port Connection Connection with Control output Connection with the Uninterrupted Power Supply UPSMode Switch SettingConnection with the Extension Units Scsi ConnectionConnection with the DVD Extension Unit Switch SettingsConnection with the DVD Extension Unit without HDD Scsi ID=0 to Connection with the DVD Extension Unit with HDDConnection to PSData Compatible Equipment Mode Selector Setting10/100BASE-T Port Connection Serial Port ConnectionPreparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Time Display Monitors and DisplaysSpot and Multiscreen Monitor Status DisplayElectronic Zoom Display Format Error orSystem Status Display Group DisplayEmergency Recorder Timer RecorderHard Disk Manual RecorderMulti Shot Recording Time Lapse RecordingDynamic Recording is set to OFF Dynamic Recording is set to ALM-ONLY One Shot RecordingSetup Procedures Displaying the Setup Menu Setup MenuSetup Timer Setting Recording Setup Programming Menu SetupDisplay Setup Communication Setup Timer Setting Color Mode Setting Recording SetupRecording Quality Setup Video Pixels ResolutionSpace Group SetupGroup Title Setup Camera AssignmentRecording of the Title Display Thumbnail Display SetupPlayback Mode Setup Shuttle Speed SetupManual Recording Mode Setting Hard Disk End Setup→ Manual with Audio → Manual Without Audio → Event Recording Manual Recording Program Timer Alarm Active Mode Manual RecordingSpecial Day Timer Time Lapse Recording Internal Timer External Program TimerEvent Recording Alarm Active ModeMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Live Sequence Multiplexer SetupSequence Setup Multiscreen Monitor Live Sequence Pattern SettingQuad Pattern Setup Quad Shift SettingSequence Timing Setting Live Sequence Pattern Setting Sequence Setup Spot MonitorGroup Multi Sequence Setting Auto Skip SettingPower on Setting Spot Monitor Power on Setting Multiscreen MonitorSequence Timing Setting Secret View Setting Alarm Output Setting Alarm SetupAlarm Port Setting Alarm Auto Reset SettingVideo Loss Alarm Setting Alarm Buzzer SettingVideo Motion Detector Setting Alarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorClock Display Display SetupCamera Title Setup Display Setting Multiscreen MonitorStatus Display Title Display Setting Spot MonitorAlarm Display Setting Title DisplayTitle Display Position Setting Clock and Status Display Position SettingBaud Rate Communication SetupPS Data Setup Unit Address SettingStop Bit Alarm DataInput Camera Number Setup Parity CheckRS-232C Setup Network Setup SET Time System SetupClock Setup Time Adjustment SettingAuto Button Locked Setting Password Lock SettingBuzzer Setting User Defined SettingDisk Management Disk Space IndicatorDisk Information System Information Error ReportAlarm Recording Backup DVD Drive SetupDVD Format DVD Disk End Setup Emergency Recording BackupDisk Space Display Operating Procedures Single Spot Live Controlling the Video Input and MonitorsControlling the Spot Monitor Selecting the Spot MonitorSelecting the Multiscreen Monitor Controlling the Multiscreen MonitorZooming Single Spot Live Group Single Sequence Live Multiscreen Select Multiscreen Spot LiveAll Input Display with Quad Shift Off All Input Display with Quad Shift On Group Display Multi Sequence LiveGroup Multi Sequence Multi Group setting Quad settingAlarm Input Alarm Control FunctionAlarm Operation Auto Reset Alarm ResetAlarm Suspension Manual ResetManual Recording Internal Timer RecordingPower-on Time Lapse Recording RecordingAlarm Recording for Manual and Power-on Recording Alarm RecordingSet to ALM-ONLY Set to ALM-MULTI Alarm Recording for Internal Timer ModesTime Lapse Recording Emergency Recording Forward or Backward search PlaybackBasic Playback StopRecord List Alarm jump searchSearch Record Function Jump searchDisplay Alarm Log SearchTime & Date Search Single and Multiscreen Spot Playback Display on the MonitorZooming Single Spot Playback REC Preview Displaying Camera and Playback ImageJogDial Backup FunctionDisplay Auto Erase Function Data Erase FunctionManual Erase Function Button Locked Function To release this function, follow the procedure belowLock Playback of Backup Data Input and Output SpecificationsStandard Accessory GeneralPanasonic Canada Inc Addendum