Setting up the Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.
Note
•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
•For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
•A polarizing screen cannot be used with this projector.
Standard Setup (Front Projection)
■Place the projector at the required distance from the screen according to the desired picture size. (See page 24.)
Connections and Setup
Example of standard setup
Side View
90° |
Audience |
•The distance from the screen to the projector may vary depending on the size of the screen.
P.24
•The default setting can be used, when placing the projector in front of the screen. If the projected im-
age is reversed or inverted, readjust the setting to
“Front” in the “PRJ Mode” menu. | P.50 |
Top View
90°
•Place the projector so that an imaginary horizon- tal line that passes through the center of the lens is perpendicular to the screen.
23
A10X_A10S#E_Print#p21_25.p65 | 23 | 03.2.4, 2:02 PM |