Keystone Correction (Correcting Trapezoidal Distortion)
Correcting Trapezoidal Distortion
This function allows for Keystone
Note
•When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal dis- tortion is called Keystone Correction.
•The Keystone Correction can be adjusted up to an angle of approximately ±35 degrees.
KEYSTONE button
UNDO button
', ", \,
buttons
1 Press 
.
•You can also use 
on the projector.
2 Press ', ", \ and to adjust the Keystone correction.
•You can also adjust the Keystone cor-
rection using the 
or 
but- tons on the projector.
Note
•Since the trapezoidal distortion of the image can be corrected up to an angle of approximately ±35 degrees, the ac- tual screen can be diagonally set up to that angle as well.
•Press 
to make the default set- ting.
•Straight lines or the edges of images may appear jagged while adjusting the image.
Compresses upper side.
Compresses 
lower side.
Basic Operation
3
Press 
.
•You can also use 
on the projector. 
Note
•You can use the same settings used in NORMAL mode 4:3 for 16:9.
29
A10X_A10S#E_Print#p26_31.p65 | 29 | 03.2.4, 2:04 PM |