Sharp PG-A10S operation manual Easy to Use Functions

If you want to change the keycode, follow the procedure below.

Note

•When “Anti-Theft” is selected, the password in- put box will appear. After the password has been entered, you can change the keycode.

1 Press the buttons on the remote control or the projector to enter the preset 4-digit keycode in “Old Code”.

2 Press any button you like on the re- mote control or the projector to en- ter the new keycode.

3 Enter the same 4-digit keycode in “Reconfirm”.

Note

•If you do not want to set a keycode, leave the keycode field blank in steps 2 and 3 and press .

Easy to

Use Functions

49

A10X_A10S#E_Print#p40_50.p65 49 03.2.4, 2:06 PM