Sharp PG-A10S operation manual Picture Display Mode, Switching the Picture Dis- play Mode, Resize

Picture Display Mode

This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “NORMAL”, “DOT BY DOT”, “BORDER” or “STRETCH” image.

Switching the Picture Dis- play Mode

Press .

•Pressing changes the display as shown on pages 40 and 41.

•To return to the standard image, press while “RESIZE” is displayed on the screen.

UNDO
button	RESIZE
	button

COMPUTER
		NORMAL			DOT BY DOT		BORDER		STRETCH
		PG-A10X	PG-A10S	PG-A10X		PG-A10S	PG-A10X	PG-A10S	PG-A10X	PG-A10S
	SVGA (800 ⋅ 600)			800	⋅ 600	—
4:3 aspect ratio	XGA (1024 ⋅ 768)	1024 ⋅ 768	800 ⋅ 600		—	1024 ⋅ 768	768 ⋅ 576	600 ⋅ 450	1024 ⋅ 576	800 ⋅ 450
	SXGA (1280 ⋅ 960)			1280 ⋅ 960		1280 ⋅ 960
	SXGA+ (1400 ⋅ 1050)			1400	⋅ 1050 1400 ⋅ 1050
Other aspect ratios	SXGA (1280 ⋅ 1024)	960 ⋅ 768	750 ⋅ 600	1280	⋅ 1024 1280 ⋅ 1024		720 ⋅ 576	562 ⋅ 450	960 ⋅ 576	750 ⋅ 450
	1280 ⋅ 720	—	—		—	—	—	—	1024 ⋅ 576	800 ⋅ 450

Input Signal

Computer

Image type

PG-A10X PG-A10S

Resolution Resolution lower than lower than

XGA SVGA

4:3 aspect ratio

XGA SVGA

4:3 aspect ratio

Resolution Resolution higher than higher than

XGA SVGA

4:3 aspect ratio

SXGA (1280 ⋅ 1024)

5:4 aspect ratio

1280 ⋅ 720

Output screen image

	NORMAL		DOT BY DOT			BORDER		STRETCH
Projects a full screen		Projects the original		Projects 4:3 image fully			Projects 16:9 image
image while maintaining		resolution signal of		in STRETCH (the following			evenly over entire screen
the aspect ratio.			the image.		column) image.		(top/bottom blank bands).
*		*		*

* *

* *

* *

*

16:9 aspect ratio

*Mode for projecting an image with the original aspect ratio without cutting any portions.

:Cutout area on which images cannot be projected.

:Area where the signals are off screen.

40

A10X_A10S#E_Print#p40_50.p65 40 03.2.4, 3:02 PM