Sharp PG-A10S operation manual Anti-TheftSetting the Anti

Using the “Options” Menu

Example: “Options” menu screen for INPUT 2 (S-Video) mode

Anti-Theft(Setting the Anti-

Theft)

The anti-theft function prevents unauthorized use of the projector. You can choose to use this func- tion or not. If you do not want to use this function, just do not enter the keycode. Once the anti-theft function is activated, users will need to enter the correct keycode each time the projector is turned on. Failure to enter the correct keycode will cause images to not be projected. The following proce- dures explain how to use this function.

Select “Anti-Theft” on the “Options” menu,

then press and follow the procedure be- low to enter the keycode.

Note

•“Anti-Theft” cannot be selected unless “Password” is set. (See page 47.)

•When “Anti-Theft” is selected, the password in- put box will appear. Enter the keycode after the right password is entered.

Info

•Once the function is activated, you must remem- ber the correct keycode. We suggest you record the keycode in a safe place where only authorized users have access. If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Cen- ter (see page 65). You may need to bring your pro- jector to them to restore the projector to original factory condition (password and keycode reset).

48

1 Press any button you like on the re- mote control or projector to set the first digit in “New Code”.

Note

•The following buttons on the remote con- trol and projector cannot be set as keycodes:

•POWER ON/OFF buttons

•ENTER button

•UNDO button

•MENU button

•FORWARD button

•BACK button

2 Enter the remaining 3 digits by pressing any buttons you like.

3 Enter the same keycode once more in “Reconfirm”.

Info

When “Anti-Theft” is set, the keycode in- putting box appears after the power is turned on. When it appears, enter the right keycode.

•Press the buttons on the remote control if the buttons on the remote control are used for set- ting the keycode. In the same manner, press the buttons on the projector if the buttons on the projector are used for setting the keycode.

A10X_A10S#E_Print#p40_50.p65 48 03.2.4, 2:06 PM