User’s Guide for Polycom HDX Systems and the Polycom Touch Control
Changing the Layout during a Video Call
When the call connects, you can change the video layout displayed at your site.
>>From the call screen, touch Layout. If the call screen has no Layout tab, you cannot change the video layout at your site.
—Touch Inside to change the location of the PIP.
—Touch Outside and then select Touch to Change Layout in the middle of the screen to cycle through different Dual Monitor Emulation layouts on the HDX system monitor.
—To swap near and far video, which includes both people and content, touch Swap Picture.
—If the call is hosted by a Polycom RMX®system, a Multiple Site Layouts tab might appear, which you can touch to select various multipoint views for different numbers of sites. Touch the My Picture tab to return to the Inside, Outside, and Swap Picture PIP choices.
Adjusting Touch Control Brightness
You can adjust the brightness of the Polycom Touch Control screen.
To adjust the touch control display brightness:
1 From the Home screen touch | User Settings. |
2Select Touch Control tab if it is visible.
3Use the slider under Display to adjust the display’s brightness.
Controlling What You Hear
Adjusting Volume
You can raise or lower the volume of the meeting. Changing the volume affects only the sound you hear at your site.
To adjust the volume:
1From the Home screen touch 
Audio.
2Use the Volume slider to increase or decrease the call volume. When you are in a call, volume control is available on the call screen and in the top right corner of other screens.
Polycom, Inc. | 13 |