JVC HRS6960E 10 EN, Check the contents, Situate the recorder, Connect the recorder to TV

Page 10

10 EN

INSTALLING YOUR NEW RECORDER

Basic Connections

Aerial connector

Back of TV

21-pin SCART

TV aerial

connector

cable

21-pin SCART

 

cable

RF cable

(not provided)

 

(provided)

Mains power cord

ANT. IN

Back of recorder

AV1 (L-1) IN/OUT RF OUT

Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. With AV connection, you can enjoy stereo playback of video tapes if you are using a stereo TV.

NOTES:

●The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV’s 21-pin AV input connector (SCART) is compatible with the Y/C signal, set

“L-1 OUTPUT” to “S-VIDEO” after the connection and the initial settings are completed ( pg. 41). You can obtain high-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

●For switching the TV’s mode, refer to the instruction manual of your television.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 65.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

8To connect to a TV with NO AV input connectors . . .

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANT. IN connector

on the rear panel of the recorder.

CConnect the provided RF cable between the RF OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

8To connect to a TV with AV input connectors . . .

AConnect the aerial, recorder and TV as per “RF

Connection”.

BConnect an optional 21-pin SCART cable between the AV1 (L-1) IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 11.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Playback or recording time exceeds this limit Counter can display up to +/ 195959. IfTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TVSelect your country Auto Set UpTurn on the recorder Before starting, make sure of the followingSelect the language Perform Auto Set Up12 EN Confirm/Set video channelPress rt to select CH - and press OK or e Perform Preset DownloadSet the video channel Set the video channel to off manually.  pgLanguage for the on-screen display 14 ENJust Clock Language Access the Main Menu screenAccess the Country Set screen Return to the normal screenSituate the Satellite Controller Installing Satellite Controller16 EN Attach the Satellite ControllerSelect the satellite receiver’s channel for testing Setting satellite receivers brand and channelAccess the Sat Control Set screen Turn on the satellite receiverNextView Link TV Auto Power On18 EN VCR Auto Standby Direct RecBasic Playback Picture Search 20 ENSlow Motion Pause during playbackSkip Search Variable Speed SearchIndex Search Instant ReviewRepeat Playback 22 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recording24 EN Instant Timer Recording ITRTape Remaining Time Super VHS ET S-VHS ET Engage the S-VHS ET modeReceiving Stereo and Bilingual Programmes Playback 26 ENRecording Before performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen 28 ENEnter the programme start time Express Timer ProgrammingAccess the Programme screen Enter the programme stop timeVPS/PDC Recording To Timer-Record Weekly Or Daily Serials30 EN Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme modeSet the programme start/stop time and channel Return to the timer mode Disengage the timer modeCancel or change a programme 32 ENSelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 ENWhen inserting a cassette with the record safety tab Intact NavigationProgramme Navigation Screen 36 ENNavigation Playback Load a recorded cassetteEdit Programme Title Select the programmeDelete Tape Data 38 ENEntering Character Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSet the tuner Select the input modeConnect the decoder Set L-2 Select to DECODER.  pg46 EN Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode setting48 EN Entire programme while timer-recording in SP mode On the remote control, or press 7 on the recorderFor Example 50 EN Colour System 52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 56 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen58 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackScan system Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Lines VHS66 EN Memo
Top Page Image Contents