PROGRAMME NAVIGATION | EN 35 |
Navigation
When you record a TV programme with this recorder, the recorder automatically stores in its memory the recording date, start time and station name. You can store these information for up to 8 programmes on one cassette. At maximum, information for 10 tapes can be stored. You can also enter the programme title when performing “SHOWVIEW ® Timer Programming”
( pg. 27) or “Express Timer Programming” ( pg. 29). It is possible to store these information only when “PROG. NAVIGATION” is set to “ON” (default setting) ( pg. 48).
When inserting a cassette with the record safety tab
intact ...
The recorder checks the tape information for the Programme Navigation.
If the recorder can store the information for 3 or less tapes, “REMAIN[ _]” also appears on the TV screen.
If the recorder has already stored the information for 10 tapes, “MEMORY FULL” appears.
If you perform new recording, the oldest tape information will be deleted from the recorder’s memory.
If the recorder cannot detect the tape information, “NO TAPE DATA DETECTED” appears.
NOTE:
If you press any button while “CHECKING TAPE DATA” appears on the TV screen, the operation is canceled.
When inserting a cassette whose record safety tab
has been removed ...
Playback begins automatically.
You can use Navigation Playback ( pg. 36), but you cannot edit programme title or delete tape data ( pg. 37, 38).