JVC HRS6960E specifications Super VHS ET S-VHS ET, Receiving Stereo and Bilingual Programmes

Page 25

EN 25

Super VHS ET (S-VHS ET)

—Recording on VHS cassettes with S-VHS quality

You can record in SP mode on VHS cassettes with S-VHS picture quality. You can play back a tape recorded using the S-VHS ET function on most of S-VHS recorders and of VHS recorders equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice some recorders are not compatible with the S-VHS ET function.)

●You can activate the S-VHS ET function only before you start recording on a VHS cassette.

●Before recording, make sure that “B.E.S.T.” is set to “ON”. ( pg. 48)

Engage the S-VHS ET mode.

Press S-VHS ET on the recorder. You can check the current setting (“S-VHS ET : ON” or “S-VHS ET : OFF”). If “S-VHS ET : OFF” appears on the TV screen, press S-VHS ET again in about 5 seconds to set it to “ON”.

●The S-VHS indicator lights up on the front display panel.

NOTES:

●You cannot activate the S-VHS ET function ...

... while recording is in progress.

... while timer-recording or Instant Timer Recording ( pg. 24) is in progress.

... while B.E.S.T. ( pg. 26) is in progress.

●The S-VHS ET function does not work ...

... with S-VHS cassettes.

... with recordings in LP/EP mode.

●To keep the highest quality recording and playback pictures over a long period of time, S-VHS recording on S-VHS cassettes is recommended.

●Use of high grade tapes is recommended for S-VHS ET recordings. On some tapes, picture quality will not improve even if the S-VHS ET function is used. Check the recording quality before you start important recordings.

●While playing back a tape recorded using the S-VHS ET function on some recorders, noise may appear. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)

●In the high-speed search, still, slow-motion or frame-by-frame playback modes ( pg. 20), noise may appear. If these modes are performed frequently on a tape recorded using the S-VHS ET function, the tape may be damaged and the picture may be deteriorated.

Receiving Stereo and Bilingual Programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast Being

On-screen Display

Received

 

 

 

 

A2

Stereo

ST

A2

Bilingual

BIL.

Regular Monaural

(none)

NICAM Stereo

ST NICAM

NICAM Bilingual

BIL. NICAM

NICAM Monaural

NICAM

 

 

 

●To listen to a stereo programme, press AUDIO until “HIFI L j h R” appears on the TV screen.

●To listen to a bilingual programme, press AUDIO until “HIFI L j” or “HIFI h R” appears on the TV screen.

●To listen to the standard (Regular Monaural) audio while receiving a NICAM broadcast, press AUDIO until “NORM” appears on the TV screen.

NOTE:

“O.S.D.” must be set to “ON” or the on-screen displays will not appear ( pg. 48).

To Record Stereo and Bilingual Programmes (A2)

Stereo programmes are automatically recorded in stereo on the Hi-Fi audio track (with the normal audio track recording mixed L and R channel sound).

●Bilingual programmes are automatically recorded in bilingual on the Hi-Fi audio track. The main soundtrack will be recorded on the normal audio track.

To Record NICAM Stereo and Bilingual Programmes

The NICAM audio programme will be recorded on the Hi-Fi audio track, and the standard audio programme will be recorded on the normal audio track.

NOTES:

●If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.

●Before playing back a programme recorded in stereo, or a bilingual programme, refer to “Soundtrack Selection” on page 22.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Playback or recording time exceeds this limit Counter can display up to +/ 195959. IfTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the following12 EN Perform Auto Set UpSelect the language Confirm/Set video channelSet the video channel Perform Preset DownloadPress rt to select CH - and press OK or e Set the video channel to off manually.  pgLanguage for the on-screen display 14 ENJust Clock Access the Country Set screen Access the Main Menu screenLanguage Return to the normal screen16 EN Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite ControllerAccess the Sat Control Set screen Setting satellite receivers brand and channelSelect the satellite receiver’s channel for testing Turn on the satellite receiver18 EN TV Auto Power OnNextView Link VCR Auto Standby Direct RecBasic Playback Slow Motion 20 ENPicture Search Pause during playbackIndex Search Variable Speed SearchSkip Search Instant ReviewNext Function Memory 22 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recording24 EN Instant Timer Recording ITRTape Remaining Time Super VHS ET S-VHS ET Engage the S-VHS ET modeReceiving Stereo and Bilingual Programmes Playback 26 ENRecording Access the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming Enter the Showview numberAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode 28 ENAccess the Programme screen Express Timer ProgrammingEnter the programme start time Enter the programme stop time30 EN To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme modeSet the programme start/stop time and channel Cancel or change a programme Disengage the timer modeReturn to the timer mode 32 ENConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 34 ENNavigation When inserting a cassette with the record safety tab IntactNavigation Playback 36 ENProgramme Navigation Screen Load a recorded cassetteSelect the programme Edit Programme TitleEntering Character 38 ENDelete Tape Data Delete the tape dataCamcorder Edit From a40 EN AnotherOutput/Input Set B Access the Output/Input Set screen Output and L-1 Input Setting42 EN Decoder connectorSimple Connections Connecting To a Satellite ReceiverPerfect Connections 44 ENConnect the decoder Select the input modeSet the tuner Set L-2 Select to DECODER.  pgMake connections 46 ENAccess the Mode Set screen Mode SetSelect the mode Select the mode setting48 EN Entire programme while timer-recording in SP mode On the remote control, or press 7 on the recorderFor Example 50 EN Colour System Tuner Set Access the Auto Channel Set screen52 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 56 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen58 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 60 ENPower Recording 62 ENOther Problems Playback 64 ENMemory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS66 EN Memo
Top Page Image Contents