JVC HRS6960E 12 EN, Select the language, Perform Auto Set Up, Confirm/Set video channel

Page 12

12 EN

INITIAL SETTINGS (cont.)

C Select the language.

Press OK. The Language Set display appears on the TV screen.

Press rt to move the highlight bar (pointer) to the language of your choice.

(Example) DEUTSCH is selected.

D Perform Auto Set Up.

Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “Auto” and press OK or e.

E Confirm/Set video channel.

With RF connection The video channel that is shown on the display panel is your video channel. Press OK.

●If you have selected

MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN EUROPE in step 2 on page 11, “2” appears instead of “1”.

●To view picture signals from the recorder, set your TV to the video channel.

With AV connection Press PR – until the display panel shows “1 – –” (or “2 – –”). Now the video

channel is set to off. Then press OK.

●To view picture signals from the recorder, set your TV to its AV mode.

On the on-screen display

Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e.

“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows either the display as illustrated in step 5 or “– –:– –” as illustrated on page 14.

●If you are using the on-screen display, the AUTO SET

screen will appear. As Auto Set Up progresses, the “q” mark on the TV screen moves from left to right.

BeginningEnd

●When you have connected the video recorder to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 10) and

the TV is turned on, the recorder automatically performs the Preset Download ( pg. 13) even if you select “Auto” or “AUTO SET” for Auto Set Up function.

ATTENTION

Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. The recorder will automatically performs Auto Clock Set.

If you have moved to a different area, perform each setting as required.

●Video channel setting (for RF connection users)  pg. 60

●Tuner setting  pg. 52

●Clock setting  pg. 58

If a new station starts broadcasting in your area, perform tuner setting ( pg. 52) and, if necessary, video channel setting ( pg. 60).

NOTES:

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 55, “INFORMATION”).

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsCheck the contents 10 ENSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up 12 ENSelect the language Confirm/Set video channelPerform Preset Download Set the video channelPress rt to select CH - and press OK or e Set the video channel to off manually.  pg14 EN Language for the on-screen displayJust Clock Access the Main Menu screen Access the Country Set screenLanguage Return to the normal screenInstalling Satellite Controller 16 ENSituate the Satellite Controller Attach the Satellite ControllerSetting satellite receivers brand and channel Access the Sat Control Set screenSelect the satellite receiver’s channel for testing Turn on the satellite receiverTV Auto Power On 18 ENNextView Link VCR Auto Standby Direct RecBasic Playback 20 EN Slow MotionPicture Search Pause during playbackVariable Speed Search Index SearchSkip Search Instant Review22 EN Next Function MemoryRepeat Playback Manual TrackingRecording Resume Function Choose a programmeSet the tape speed Start recordingInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming Enter the Showview numberSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode 28 ENExpress Timer Programming Access the Programme screenEnter the programme start time Enter the programme stop timeTo Timer-Record Weekly Or Daily Serials 30 ENVPS/PDC Recording Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel Disengage the timer mode Cancel or change a programmeReturn to the timer mode 32 ENCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording 34 ENWhen inserting a cassette with the record safety tab Intact Navigation36 EN Navigation PlaybackProgramme Navigation Screen Load a recorded cassetteEdit Programme Title Select the programme38 EN Entering CharacterDelete Tape Data Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSelect the input mode Connect the decoderSet the tuner Set L-2 Select to DECODER.  pg46 EN Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode setting48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System Access the Auto Channel Set screen Tuner Set52 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel56 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set58 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackSignal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS66 EN Memo
Top Page Image Contents