JVC HRS6960E specifications Perform Auto Channel Set, View the Confirmation screen, Press OK twice

Page 53

EN 53

IMPORTANT

●In certain reception conditions, station names may not be stored correctly, and Auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW system, the recorder will record a TV programme of a different station. When programming the

timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly ( pg. 27, “SHOWVIEW® Timer Programming”).

●Your video recorder memorizes all detected stations even if

reception of some of them is poor. You can delete those stations with an unacceptable picture ( pg. 55, “Delete A Channel”).

NOTES:

●Fine tuning is performed automatically during Auto Channel Set. If you want to perform tuning manually, refer to page 56.

●If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED –NO SIGNAL–” appears on the TV screen in step 7. When this happens, make sure of the aerial connection and press OK; Auto Channel Set will take place again.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 55, “INFORMATION”).

F Perform Auto Channel Set.

Press OK twice.

●When you have connected

the video recorder to a TV

 

 

offering T-V Link via a fully-

 

 

wired 21-pin SCART cable

 

 

( pg. 10), the recorder

 

 

automatically performs the

 

 

Preset Download and the

 

 

T-V LINK screen will appear

 

 

( pg. 13).

Beginning

End

● The Auto Set screen appears,

and remains on screen while the recorder searches for receivable stations.

As Auto Channel Set progresses, the “q” mark on the TV screen moves from left to right. Wait until the TV screen as shown in step 7 appears.

G View the Confirmation screen.

After “SCAN COMPLETED” is displayed on the TV screen for about 5 seconds, the Confirmation screen looking like the one to the right appears. The stations your recorder located appear on a Confirmation screen — channel positions (PR),

channels (CH) and station names (ID –  pg. 57). The blueback screen and the programme currently being broadcast by the blinking station appear alternately for 8 seconds each. To view the next page, use the rt w e button on the remote control.

●The stations located in the selected country appear at the top of the list.

●The Guide Program numbers will also be set automatically during Auto Channel Set.

H Return to the normal screen.

Press MENU.

●Using the Confirmation screen, you can skip or add channel positions, enter station names and perform other operations. Refer to pages 54 – 56 for the procedures.

●Depending on reception conditions, the stations may not be stored in order, and the station names may not be stored correctly.

●For information on scrambled broadcasts, refer to page 55.

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Tape Speed SP/LP/EP  pg Counter can display up to +/ 195959. IfPlayback or recording time exceeds this limit ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the following12 EN Perform Auto Set UpSelect the language Confirm/Set video channelSet the video channel Perform Preset DownloadPress rt to select CH - and press OK or e Set the video channel to off manually.  pgJust Clock 14 ENLanguage for the on-screen display Access the Country Set screen Access the Main Menu screenLanguage Return to the normal screen16 EN Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite ControllerAccess the Sat Control Set screen Setting satellite receivers brand and channelSelect the satellite receiver’s channel for testing Turn on the satellite receiver18 EN TV Auto Power OnNextView Link VCR Auto Standby Direct RecBasic Playback Slow Motion 20 ENPicture Search Pause during playbackIndex Search Variable Speed SearchSkip Search Instant ReviewNext Function Memory 22 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recordingTape Remaining Time Instant Timer Recording ITR24 EN Receiving Stereo and Bilingual Programmes Engage the S-VHS ET modeSuper VHS ET S-VHS ET Recording 26 ENPlayback Access the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming Enter the Showview numberAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode 28 ENAccess the Programme screen Express Timer ProgrammingEnter the programme start time Enter the programme stop time30 EN To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming Cancel or change a programme Disengage the timer modeReturn to the timer mode 32 ENConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 34 ENNavigation When inserting a cassette with the record safety tab IntactNavigation Playback 36 ENProgramme Navigation Screen Load a recorded cassetteSelect the programme Edit Programme TitleEntering Character 38 ENDelete Tape Data Delete the tape dataCamcorder Edit From a40 EN AnotherOutput/Input Set B Access the Output/Input Set screen Output and L-1 Input Setting42 EN Decoder connectorSimple Connections Connecting To a Satellite ReceiverPerfect Connections 44 ENConnect the decoder Select the input modeSet the tuner Set L-2 Select to DECODER.  pgMake connections 46 ENAccess the Mode Set screen Mode SetSelect the mode Select the mode setting48 EN For Example On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 50 EN Colour System Tuner Set Access the Auto Channel Set screen52 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 56 ENSet Stations a Station Name TV Station And ID List58 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 60 ENPower Recording 62 ENOther Problems Playback 64 ENMemory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS66 EN Memo
Top Page Image Contents