JVC HRS6960E 22 EN, Next Function Memory, Repeat Playback, Manual Tracking, Soundtrack Selection

Page 22

22 EN

PLAYBACK (cont.)

Next Function Memory

The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a- For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds. b- For Automatic Power Off

Press 3, then press 1 within 2 seconds. c- For Automatic Timer Standby

Press 3, then press # (TIMER) within 2 seconds.

NOTE:

The Automatic Power Off does not work if “AUTO TIMER” is set to “ON” ( 48) and if any timer programming has been made. If “AUTO TIMER” is set to “ON”, the recorder directly goes into the Timer-Standby mode at the same time when the 1 is pressed for the Automatic Power Off.

Repeat Playback

Your recorder can automatically play back the whole tape 100 times repeatedly.

1Start playback.

Press 4.

2Activate Repeat Playback.

Press 4 and hold for over 5 seconds, then release.

●The Play indicator ($) on the front display panel blinks slowly.

●After playing back a tape 100 times, the recorder stops automatically.

3Stop Repeat Playback.

Press 8 at any time.

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.

NOTE:

Repeat playback is not possible with a cassette recorded in EP mode.

Manual Tracking

Your recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.

1Override automatic tracking.

During playback, press p on the remote control.

2Adjust the tracking manually.

Press PR + or – on the remote control.

●Press p again to return to automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Soundtrack Selection

Your recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK

USE

 

On-Screen Display

 

 

 

HI FI

For Hi-Fi stereo tapes

L j h R

 

 

 

HI FI

For main audio of Bilingual tapes

L j

 

 

 

HI FI

For sub audio of Bilingual tapes

h R

 

 

 

NORM

For audio-dubbed tapes

 

 

HI FI

For audio-dubbed tapes

NORM

 

 

 

NOTES:

●“HI FI L j h R” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 25.

●“O.S.D.” must be set to “ON” or the on-screen displays will not appear ( pg. 48).

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Playback or recording time exceeds this limit Counter can display up to +/ 195959. IfTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TVSelect your country Auto Set UpTurn on the recorder Before starting, make sure of the followingSelect the language Perform Auto Set Up12 EN Confirm/Set video channelPress rt to select CH - and press OK or e Perform Preset DownloadSet the video channel Set the video channel to off manually.  pgLanguage for the on-screen display 14 ENJust Clock Language Access the Main Menu screenAccess the Country Set screen Return to the normal screenSituate the Satellite Controller Installing Satellite Controller16 EN Attach the Satellite ControllerSelect the satellite receiver’s channel for testing Setting satellite receivers brand and channelAccess the Sat Control Set screen Turn on the satellite receiverNextView Link TV Auto Power On18 EN VCR Auto Standby Direct RecBasic Playback Picture Search 20 ENSlow Motion Pause during playbackSkip Search Variable Speed SearchIndex Search Instant ReviewRepeat Playback 22 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recording24 EN Instant Timer Recording ITRTape Remaining Time Super VHS ET S-VHS ET Engage the S-VHS ET modeReceiving Stereo and Bilingual Programmes Playback 26 ENRecording Before performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen 28 ENEnter the programme start time Express Timer ProgrammingAccess the Programme screen Enter the programme stop timeVPS/PDC Recording To Timer-Record Weekly Or Daily Serials30 EN Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme modeSet the programme start/stop time and channel Return to the timer mode Disengage the timer modeCancel or change a programme 32 ENSelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 ENWhen inserting a cassette with the record safety tab Intact NavigationProgramme Navigation Screen 36 ENNavigation Playback Load a recorded cassetteEdit Programme Title Select the programmeDelete Tape Data 38 ENEntering Character Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSet the tuner Select the input modeConnect the decoder Set L-2 Select to DECODER.  pg46 EN Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode setting48 EN Entire programme while timer-recording in SP mode On the remote control, or press 7 on the recorderFor Example 50 EN Colour System 52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 56 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen58 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackScan system Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Lines VHS66 EN Memo
Top Page Image Contents