JVC HRS6960E specifications Confirm the overlapping programmes, Select the programme to modify

Page 33

EN 33

When programmes overlap each other

If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.

Example: Programme 1 (you have just made) and Programme 4 overlap each other.

A Confirm the overlapping programmes.

Overlapping programmes blink on the TV screen.

B Select the programme to modify.

Press rt, then press OK or e.

You can only select one of the overlapping programmes.

NOTE:

If you do not mind this overlap, press PROG to finish the timer programme setting. The program starting earlier or program with the lower program number will be recorded.

C Cancel or change programme setting.

To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

To change a programme, press the appropriate button: START+/–,STOP+/–,DATE+/–,PR+/–,VPS/PDC (number key “7”), DAILY (number key “8”), WEEKLY (number key “9”) and/or SP/LP/EP (p) when the Programme screen on which you want to make changes is shown, then press OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

NOTE:

If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.

Image 33
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the following12 EN Perform Auto Set UpSelect the language Confirm/Set video channelSet the video channel Perform Preset DownloadPress rt to select CH - and press OK or e Set the video channel to off manually.  pg14 EN Language for the on-screen displayJust Clock Access the Country Set screen Access the Main Menu screenLanguage Return to the normal screen16 EN Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite ControllerAccess the Sat Control Set screen Setting satellite receivers brand and channelSelect the satellite receiver’s channel for testing Turn on the satellite receiver18 EN TV Auto Power OnNextView Link VCR Auto Standby Direct RecBasic Playback Slow Motion 20 ENPicture Search Pause during playbackIndex Search Variable Speed SearchSkip Search Instant ReviewNext Function Memory 22 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recordingInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Access the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming Enter the Showview numberAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode 28 ENAccess the Programme screen Express Timer ProgrammingEnter the programme start time Enter the programme stop time30 EN To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel Cancel or change a programme Disengage the timer modeReturn to the timer mode 32 ENConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 34 ENNavigation When inserting a cassette with the record safety tab IntactNavigation Playback 36 ENProgramme Navigation Screen Load a recorded cassetteSelect the programme Edit Programme TitleEntering Character 38 ENDelete Tape Data Delete the tape dataCamcorder Edit From a40 EN AnotherOutput/Input Set B Access the Output/Input Set screen Output and L-1 Input Setting42 EN Decoder connectorSimple Connections Connecting To a Satellite ReceiverPerfect Connections 44 ENConnect the decoder Select the input modeSet the tuner Set L-2 Select to DECODER.  pgMake connections 46 ENAccess the Mode Set screen Mode SetSelect the mode Select the mode setting48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System Tuner Set Access the Auto Channel Set screen52 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled Broadcast56 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set58 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 60 ENPower Recording 62 ENOther Problems Playback 64 ENMemory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS66 EN Memo