JVC HRS6960E specifications 48 EN

Page 48

48 EN

 

SUBSIDIARY SETTINGS (cont.)

 

 

* The default setting is bold in the table below.

 

 

8 B.E.S.T.

You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to

ON

“ON” or “OFF” ( pg. 26).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture quality according to

AUTO

your preference. Normally select “AUTO”.

EDIT

AUTO:

Provides the optimised picture benefits of the B.E.S.T. Picture

SOFT

EDIT:

System.

 

Minimizes picture degradation during editing (recording and

 

SOFT:

playback).

 

Reduces image coarseness when viewing overplayed tapes

 

 

containing a lot of noise.

 

NOTES:

 

 

When you select “EDIT” or “SOFT”, the selected mode will not change until you

 

select another mode.

 

When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish

 

dubbing the tapes.

 

When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from

 

“AUTO” to “NORM”.

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is automatically engaged when

ON

the recorder power is turned off, and automatically disengaged when the

OFF

recorder is powered back on.

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are

 

disabled while the Timer mode is engaged. To disengage the timer, press # (TIMER).

 

 

8 O.S.D.

When this function is set to “ON”, various operational indicators appear on

ON

the TV screen. Messages appear in the selected language ( pg. 14, 15).

OFF

NOTES:

 

 

 

 

When you use this recorder as the source player for editing, be sure to set “O.S.D.”

 

to “OFF” before starting.

 

During playback, the operation mode indicators may be disturbed depending on the

 

type of tape being used.

 

 

8 PROG. NAVIGATION

When this function is set to “ON”, the recorder stores information on the

ON

recorded programmes. If you do not want to use the Programme Navigation

OFF

function ( pg. 35), set “PROG. NAVIGATION” to “OFF”.

 

NOTES:

 

 

Programme Navigation is possible with the cassettes recorded with this recorder

 

only.

 

 

Before recording, make sure the recorder’s clock is set correctly.

 

To record the programme information in this recorder’s memory, you must continue

 

to record each programme for over the minimum recording time; 8 minutes for the

 

SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

 

Programme Navigation may not work properly depending on the tape being used.

 

The programme information is stored in this recorder’s memory. If the memory in this

 

recorder should ever be damaged and the programme information lost, it is

 

impossible to restore that information.

 

 

 

Image 48
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsCheck the contents 10 ENSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up 12 ENSelect the language Confirm/Set video channelPerform Preset Download Set the video channelPress rt to select CH - and press OK or e Set the video channel to off manually.  pg14 EN Language for the on-screen displayJust Clock Access the Main Menu screen Access the Country Set screenLanguage Return to the normal screenInstalling Satellite Controller 16 ENSituate the Satellite Controller Attach the Satellite ControllerSetting satellite receivers brand and channel Access the Sat Control Set screenSelect the satellite receiver’s channel for testing Turn on the satellite receiverTV Auto Power On 18 ENNextView Link VCR Auto Standby Direct RecBasic Playback 20 EN Slow MotionPicture Search Pause during playbackVariable Speed Search Index SearchSkip Search Instant Review22 EN Next Function MemoryRepeat Playback Manual TrackingRecording Resume Function Choose a programmeSet the tape speed Start recordingInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming Enter the Showview numberSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode 28 ENExpress Timer Programming Access the Programme screenEnter the programme start time Enter the programme stop timeTo Timer-Record Weekly Or Daily Serials 30 ENVPS/PDC Recording Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel Disengage the timer mode Cancel or change a programmeReturn to the timer mode 32 ENCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording 34 ENWhen inserting a cassette with the record safety tab Intact Navigation36 EN Navigation PlaybackProgramme Navigation Screen Load a recorded cassetteEdit Programme Title Select the programme38 EN Entering CharacterDelete Tape Data Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSelect the input mode Connect the decoderSet the tuner Set L-2 Select to DECODER.  pg46 EN Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode setting48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System Access the Auto Channel Set screen Tuner Set52 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel56 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set58 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackSignal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS66 EN Memo