JVC HRS6960E specifications Perform Preset Download, Set the video channel

Page 13

EN 13

Preset Download

Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set

ATTENTION

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NextView Link via fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

If you have connected the recorder to your TV via the AV connection ( pg. 10), the recorder will automatically perform Preset Download instead of the Auto Set Up in step 4 on page 12. After downloading, the recorder sets the clock and Guide Program numbers automatically.

Perform steps 1 to 3 of “Auto Set Up” on page 11 before continuing.

A Perform Preset Download.

Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “CH – –” and press OK or e.

On the on-screen display

Press rt to move the highlight bar (pointer) to “T-V LINK” and press OK or e.

Preset positions on the front display panel increase from “CH1”; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or “– –:– –” as illustrated on page 14.

●If you are using the on-screen display, the T-V LINK screen

will appear. When Preset Download is completed, “COMPLETED” appears for about 5 seconds, then the normal screen appears.

●If you press any button on the

recorder or remote control while downloading is in progress, it will be interrupted.

NOTES:

●For details, refer to the instruction manual of your TV.

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder cannot perform Auto Clock Set.

●If there is a power cut, or if you press 1 or MENU while downloading or set up is in progress, it will be interrupted; be sure to turn off the recorder power once and try again from the beginning.

●Auto Clock Set may not function properly depending on the reception condition.

●On this recorder, the characters available for station names (ID) are A–Z, 0–9, –, f, + and I (space). Some names of

downloaded stations may differ from those of your TV ( pg. 56).

B Set the video channel.

Set the video channel to off manually. ( pg. 60)

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Playback or recording time exceeds this limit Counter can display up to +/ 195959. IfTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the following12 EN Perform Auto Set UpSelect the language Confirm/Set video channelSet the video channel Perform Preset DownloadPress rt to select CH - and press OK or e Set the video channel to off manually.  pgLanguage for the on-screen display 14 ENJust Clock Access the Country Set screen Access the Main Menu screenLanguage Return to the normal screen16 EN Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite ControllerAccess the Sat Control Set screen Setting satellite receivers brand and channelSelect the satellite receiver’s channel for testing Turn on the satellite receiver18 EN TV Auto Power OnNextView Link VCR Auto Standby Direct RecBasic Playback Slow Motion 20 ENPicture Search Pause during playbackIndex Search Variable Speed SearchSkip Search Instant ReviewNext Function Memory 22 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recording24 EN Instant Timer Recording ITRTape Remaining Time Super VHS ET S-VHS ET Engage the S-VHS ET modeReceiving Stereo and Bilingual Programmes Playback 26 ENRecording Access the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming Enter the Showview numberAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode 28 ENAccess the Programme screen Express Timer ProgrammingEnter the programme start time Enter the programme stop time30 EN To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme modeSet the programme start/stop time and channel Cancel or change a programme Disengage the timer modeReturn to the timer mode 32 ENConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 34 ENNavigation When inserting a cassette with the record safety tab IntactNavigation Playback 36 ENProgramme Navigation Screen Load a recorded cassetteSelect the programme Edit Programme TitleEntering Character 38 ENDelete Tape Data Delete the tape dataCamcorder Edit From a40 EN AnotherOutput/Input Set B Access the Output/Input Set screen Output and L-1 Input Setting42 EN Decoder connectorSimple Connections Connecting To a Satellite ReceiverPerfect Connections 44 ENConnect the decoder Select the input modeSet the tuner Set L-2 Select to DECODER.  pgMake connections 46 ENAccess the Mode Set screen Mode SetSelect the mode Select the mode setting48 EN Entire programme while timer-recording in SP mode On the remote control, or press 7 on the recorderFor Example 50 EN Colour System Tuner Set Access the Auto Channel Set screen52 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 56 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen58 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 60 ENPower Recording 62 ENOther Problems Playback 64 ENMemory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS66 EN Memo
Top Page Image Contents