JVC HRS6960E 28 EN, Set the VPS/PDC mode, Access the Title Edit screen, Enter the programme title

Page 28

28 EN

TIMER RECORDING (cont.)

D Set the tape speed.

Press SP/LP/EP (p).

●It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 51)

E Set the VPS/PDC mode.

Press VPS/PDC (number key “7”) to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is set to ON.

●If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is

set to OFF.

 “VPS/PDC Recording” on page 30.

F Access the Title Edit screen.

Press the number key “1”.

The Title Edit screen appears.

● You can access the Title Edit screen only when “PROG. NAVIGATION” is set to “ON”. ( pg. 48)

G Enter the programme title.

Press the number keys and e to enter characters, then press OK. For details, refer to “Entering Character” on page 38.

H Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen and “Err” on the front display panel, see page 33.

●Repeat steps 1 – 8 for each additional programme.

I Engage the recorder’s timer mode.

Press # (TIMER). The recorder turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays.

●To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●To change the channel position number, press PR +/-.

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes ( pg. 32).

●It is not possible to timer-record a satellite broadcast received on the channel position “0” by the satellite receiver.

Satellite Receiver Users

To timer-record a satellite broadcast using the SHOWVIEW system:

APerform “Satellite Receiver Control Setting” on page 16. B Perform steps 1 – 9. In step 5, you cannot set “VPS/PDC”

to “ON”.

C Leave the satellite receiver’s power on.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Playback or recording time exceeds this limit Counter can display up to +/ 195959. IfTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsCheck the contents 10 ENSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up 12 ENSelect the language Confirm/Set video channelPerform Preset Download Set the video channelPress rt to select CH - and press OK or e Set the video channel to off manually.  pgLanguage for the on-screen display 14 ENJust Clock Access the Main Menu screen Access the Country Set screenLanguage Return to the normal screenInstalling Satellite Controller 16 ENSituate the Satellite Controller Attach the Satellite ControllerSetting satellite receivers brand and channel Access the Sat Control Set screenSelect the satellite receiver’s channel for testing Turn on the satellite receiverTV Auto Power On 18 ENNextView Link VCR Auto Standby Direct RecBasic Playback 20 EN Slow MotionPicture Search Pause during playbackVariable Speed Search Index SearchSkip Search Instant Review22 EN Next Function MemoryRepeat Playback Manual TrackingRecording Resume Function Choose a programmeSet the tape speed Start recording24 EN Instant Timer Recording ITRTape Remaining Time Super VHS ET S-VHS ET Engage the S-VHS ET modeReceiving Stereo and Bilingual Programmes Playback 26 ENRecording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming Enter the Showview numberSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode 28 ENExpress Timer Programming Access the Programme screenEnter the programme start time Enter the programme stop timeTo Timer-Record Weekly Or Daily Serials 30 ENVPS/PDC Recording Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme modeSet the programme start/stop time and channel Disengage the timer mode Cancel or change a programmeReturn to the timer mode 32 ENCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording 34 ENWhen inserting a cassette with the record safety tab Intact Navigation36 EN Navigation PlaybackProgramme Navigation Screen Load a recorded cassetteEdit Programme Title Select the programme38 EN Entering CharacterDelete Tape Data Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSelect the input mode Connect the decoderSet the tuner Set L-2 Select to DECODER.  pg46 EN Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode setting48 EN Entire programme while timer-recording in SP mode On the remote control, or press 7 on the recorderFor Example 50 EN Colour System Access the Auto Channel Set screen Tuner Set52 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 56 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen58 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackSignal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS66 EN Memo
Top Page Image Contents