JVC HRS6960E specifications 24 EN, Instant Timer Recording ITR, Tape Remaining Time

Page 24

24 EN

RECORDING (cont.)

Recording Features

Record One Programme While Watching Another

If your recorder is connected to the TV via the AV connection, press TV/VCR. The recorder’s VCR indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the recorder’s PR buttons is recorded on the tape.

●If a decoder is connected to the recorder ( pg. 45), you can select a scrambled channel as well with the TV channel controls.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

1Start recording.

Press 7 on the recorder.

2Engage the ITR mode.

Press 7 again. ““ blinks and “0:30” appears on the front display panel.

3Set the recording duration.

If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the 7 button on the recorder’s front panel.

Elapsed Recording Time Indication

1Set the counter display.

Press – –:– – until a counter reading appears on the front display panel.

●The front display panel shows

the counter reading with “:” lit.

2Reset the counter.

Press 0000 before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press – –:– – until the time remaining on the tape appears.

●The front display panel shows

the tape remaining time with “:” blinking.

● By pressing the – –:– – button, you can change display to

show the channel position*, clock time, counter reading or tape remaining time.

* Channel position is not displayed during playback.

NOTE:

Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear, or the display may blink on occasion.

Image 24

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsCheck the contents 10 ENSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up 12 ENSelect the language Confirm/Set video channelPerform Preset Download Set the video channelPress rt to select CH - and press OK or e Set the video channel to off manually. pg14 EN Language for the on-screen displayJust Clock Access the Main Menu screen Access the Country Set screenLanguage Return to the normal screenInstalling Satellite Controller 16 ENSituate the Satellite Controller Attach the Satellite ControllerSetting satellite receivers brand and channel Access the Sat Control Set screenSelect the satellite receiver’s channel for testing Turn on the satellite receiverTV Auto Power On 18 ENNextView Link VCR Auto Standby Direct RecBasic Playback 20 EN Slow MotionPicture Search Pause during playbackVariable Speed Search Index SearchSkip Search Instant Review22 EN Next Function MemoryRepeat Playback Manual TrackingRecording Resume Function Choose a programmeSet the tape speed Start recordingInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming Enter the Showview numberSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode 28 ENExpress Timer Programming Access the Programme screenEnter the programme start time Enter the programme stop timeTo Timer-Record Weekly Or Daily Serials 30 ENVPS/PDC Recording Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel Disengage the timer mode Cancel or change a programmeReturn to the timer mode 32 ENCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording 34 ENWhen inserting a cassette with the record safety tab Intact Navigation36 EN Navigation PlaybackProgramme Navigation Screen Load a recorded cassetteEdit Programme Title Select the programme38 EN Entering CharacterDelete Tape Data Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSelect the input mode Connect the decoderSet the tuner Set L-2 Select to DECODER. pg46 EN Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode setting48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System Access the Auto Channel Set screen Tuner Set52 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel56 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set58 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackSignal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS66 EN Memo