JVC HRS6960E Recording Resume Function, Choose a programme, Set the tape speed, Start recording

Page 23

RECORDING

EN 23

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 24) or timer recording ( pg. 27, 29, 31), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

NOTE:

If a power outage exceed the recorder’s memory backup time, Recording Resume Function does not work.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder checks the tape information for Programme Navigation. For details, refer to “Navigation” ( pg. 35).

B Choose a programme.

Press PR+/– or the number keys. Or push the JOG dial* to the left or right to select the channel you wish to record.

* functions only if FDP shows channel number.

C Set the tape speed.

Press SP/LP/EP (p). The current setting appears on the front display panel or TV screen. Press SP/LP/EP (p) again to change the setting while the tape speed is displayed on the TV screen.

●In EP mode, the recording time is extended three times.

●If you record a programme in EP mode on this recorder, it is recommended to play back the EP-recorded tape on this recorder.

●It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 51)

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

●If “O.S.D.” is set to “ON” ( pg. 48), “MARK” blinks on the screen while an index code is being marked.

●When “DIRECT REC” is set to “ON” ( 49), if you press any button just after pressing 7 on the recorder (or 7 and 4 on the remote control), the recorder may not function properly.

B.E.S.T. takes place at the beginning of both the first SP and the first LP (or EP) recording after inserting the cassette. ( pg. 26)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 49).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

●You can select channel during the Record Pause mode.

F Stop recording.

Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Tape Speed SP/LP/EP  pg Counter can display up to +/ 195959. IfPlayback or recording time exceeds this limit ON-SCREEN Display Remote Control Operating JVC TVs How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderBefore starting, make sure of the following Auto Set UpTurn on the recorder Select your countryConfirm/Set video channel Perform Auto Set Up12 EN Select the languageSet the video channel to off manually.  pg Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock 14 ENLanguage for the on-screen display Return to the normal screen Access the Main Menu screenAccess the Country Set screen LanguageAttach the Satellite Controller Installing Satellite Controller16 EN Situate the Satellite ControllerTurn on the satellite receiver Setting satellite receivers brand and channelAccess the Sat Control Set screen Select the satellite receiver’s channel for testingVCR Auto Standby Direct Rec TV Auto Power On18 EN NextView LinkBasic Playback Pause during playback 20 ENSlow Motion Picture SearchInstant Review Variable Speed SearchIndex Search Skip SearchManual Tracking 22 ENNext Function Memory Repeat PlaybackStart recording Recording Resume FunctionChoose a programme Set the tape speedTape Remaining Time Instant Timer Recording ITR24 EN Receiving Stereo and Bilingual Programmes Engage the S-VHS ET modeSuper VHS ET S-VHS ET Recording 26 ENPlayback Enter the Showview number Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer Programming28 EN Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer modeEnter the programme stop time Express Timer ProgrammingAccess the Programme screen Enter the programme start timeEnter the channel position To Timer-Record Weekly Or Daily Serials30 EN VPS/PDC RecordingSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 32 EN Disengage the timer modeCancel or change a programme Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify34 EN Select the L-2 Select modeRecording mode Programme RecordingNavigation When inserting a cassette with the record safety tab IntactLoad a recorded cassette 36 ENNavigation Playback Programme Navigation ScreenSelect the programme Edit Programme TitleDelete the tape data 38 ENEntering Character Delete Tape DataCamcorder Edit From a40 EN AnotherOutput/Input Set B Access the Output/Input Set screen Output and L-1 Input Setting42 EN Decoder connectorSimple Connections Connecting To a Satellite ReceiverPerfect Connections 44 ENSet L-2 Select to DECODER.  pg Select the input modeConnect the decoder Set the tunerMake connections 46 ENSelect the mode setting Mode SetAccess the Mode Set screen Select the mode48 EN For Example On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 50 EN Colour System Auto Channel Set Access the Auto Channel Set screenTuner Set 52 ENPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 56 ENSet Stations a Station Name TV Station And ID List58 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data60 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 62 ENOther Problems Playback 64 ENLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Scan system66 EN Memo
Top Page Image Contents