JVC HRS6960E Express Timer Programming, Access the Programme screen, Enter the programme date

Page 29

EN 29

Express Timer

Programming

Before performing Express Timer Programming:

Make sure that the recorder’s built-in clock is set properly.

Insert a cassette with the safety tab in place. The recorder will come on automatically.

Turn on the TV and select the video channel (or AV mode).

If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

Example: To timer-record the programme from 21:00 to 22:00 on 25th December, on channel 1.

A Access the SHOWVIEW screen.

Press PROG.

B Access the Programme screen.

Press START+/–. (If you’re just starting out, “P1” appears.)

The front display panel looks like this:

C Enter the programme start time.

Press START+/– to enter the time you want recording to start.

Press and hold START+/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

The front display panel looks like this:

D Enter the programme stop time.

Press STOP+/– to enter the time you want recording to stop.

Press and hold STOP+/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the programme date.

Press DATE+/–.

The current date appears on the TV screen. The date you enter appears in its place.

Image 29
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Tape Speed SP/LP/EP  pg Counter can display up to +/ 195959. IfPlayback or recording time exceeds this limit ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the following12 EN Perform Auto Set UpSelect the language Confirm/Set video channelSet the video channel Perform Preset DownloadPress rt to select CH - and press OK or e Set the video channel to off manually.  pgJust Clock 14 ENLanguage for the on-screen display Access the Country Set screen Access the Main Menu screenLanguage Return to the normal screen16 EN Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite ControllerAccess the Sat Control Set screen Setting satellite receivers brand and channelSelect the satellite receiver’s channel for testing Turn on the satellite receiver18 EN TV Auto Power OnNextView Link VCR Auto Standby Direct RecBasic Playback Slow Motion 20 ENPicture Search Pause during playbackIndex Search Variable Speed SearchSkip Search Instant ReviewNext Function Memory 22 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recordingTape Remaining Time Instant Timer Recording ITR24 EN Receiving Stereo and Bilingual Programmes Engage the S-VHS ET modeSuper VHS ET S-VHS ET Recording 26 ENPlayback Access the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming Enter the Showview numberAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode 28 ENAccess the Programme screen Express Timer ProgrammingEnter the programme start time Enter the programme stop time30 EN To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming Cancel or change a programme Disengage the timer modeReturn to the timer mode 32 ENConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 34 ENNavigation When inserting a cassette with the record safety tab IntactNavigation Playback 36 ENProgramme Navigation Screen Load a recorded cassetteSelect the programme Edit Programme TitleEntering Character 38 ENDelete Tape Data Delete the tape dataCamcorder Edit From a40 EN AnotherOutput/Input Set B Access the Output/Input Set screen Output and L-1 Input Setting42 EN Decoder connectorSimple Connections Connecting To a Satellite ReceiverPerfect Connections 44 ENConnect the decoder Select the input modeSet the tuner Set L-2 Select to DECODER.  pgMake connections 46 ENAccess the Mode Set screen Mode SetSelect the mode Select the mode setting48 EN For Example On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 50 EN Colour System Tuner Set Access the Auto Channel Set screen52 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 56 ENSet Stations a Station Name TV Station And ID List58 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 60 ENPower Recording 62 ENOther Problems Playback 64 ENMemory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS66 EN Memo