JVC HRS6960E specifications 30 EN, VPS/PDC Recording, Enter the channel position, Press PR+

Page 30

30 EN

TIMER RECORDING (cont.)

F Enter the channel position.

Press PR+/–.

G Set the tape speed.

Press SP/LP/EP (p).

●It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 51)

H Set the VPS/PDC mode.

Press VPS/PDC (number key “7”) to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is set to ON.

●If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is

set to OFF.

 “VPS/PDC Recording” in the right column

I Access the Title Edit screen.

Press the number key “1”.

The Title Edit screen appears.

● You can access the Title Edit screen only when “PROG. NAVIGATION” is set to “ON”. ( pg. 48)

J Enter the programme title.

Press the number keys and e to enter characters, then press OK. For details, refer to “Entering Character” on page 38.

K Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen and “Err” on the front display panel, see page 33.

●Repeat steps 1 – 11 for each additional programme.

L Engage the recorder’s timer mode.

Press # (TIMER). The recorder turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

NOTES:

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes ( pg. 32).

●It is not possible to timer-record a satellite broadcast received on the channel position “0” by the satellite receiver.

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer Programming:

APerform “Satellite Receiver Control Setting” on page 16. B Perform steps 1 – 12. In step 6, press the number key “0” to change “TV PROG” to “SAT”. Then press PR+/– to

enter the channel position for the satellite broadcast. In step 8, you cannot set “VPS/PDC” to “ON”.

C Leave the satellite receiver’s power on.

VPS/PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.

NOTES:

●When you use Express Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

●VPS/PDC recording is also possible when a satellite receiver or a cable system is connected to AV2 (L-2) IN/ DECODER connector on your recorder.

●VPS/PDC recording is also possible via the AV1 (L-1) IN/ OUT connector.

How to check if the station being received transmits a VPS/PDC signal

APress – –:– – until the channel position appears on the

front display panel.

BHold down START+ for about 5 seconds. “VPS/PDC” appears blinking on the TV screen. If a VPS/PDC signal is detected from the station,

“VPS/PDC” will stop blinking.

If no VPS/PDC signal is detected from the station, “VPS/PDC” will blink at a slower rate.

CPress – –:– – or START+ again to return to normal display.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TVSelect your country Auto Set UpTurn on the recorder Before starting, make sure of the followingSelect the language Perform Auto Set Up12 EN Confirm/Set video channelPress rt to select CH - and press OK or e Perform Preset DownloadSet the video channel Set the video channel to off manually.  pg14 EN Language for the on-screen displayJust Clock Language Access the Main Menu screenAccess the Country Set screen Return to the normal screenSituate the Satellite Controller Installing Satellite Controller16 EN Attach the Satellite ControllerSelect the satellite receiver’s channel for testing Setting satellite receivers brand and channelAccess the Sat Control Set screen Turn on the satellite receiverNextView Link TV Auto Power On18 EN VCR Auto Standby Direct RecBasic Playback Picture Search 20 ENSlow Motion Pause during playbackSkip Search Variable Speed SearchIndex Search Instant ReviewRepeat Playback 22 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recordingInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Before performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen 28 ENEnter the programme start time Express Timer ProgrammingAccess the Programme screen Enter the programme stop timeVPS/PDC Recording To Timer-Record Weekly Or Daily Serials30 EN Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel Return to the timer mode Disengage the timer modeCancel or change a programme 32 ENSelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 ENWhen inserting a cassette with the record safety tab Intact NavigationProgramme Navigation Screen 36 ENNavigation Playback Load a recorded cassetteEdit Programme Title Select the programmeDelete Tape Data 38 ENEntering Character Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSet the tuner Select the input modeConnect the decoder Set L-2 Select to DECODER.  pg46 EN Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode setting48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System 52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel56 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set58 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackScan system Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Lines VHS66 EN Memo
Top Page Image Contents