JVC HRS6960E 36 EN, Navigation Playback, Programme Navigation Screen, Load a recorded cassette

Page 36

36 EN

PROGRAMME NAVIGATION (cont.)

Navigation Playback

This function is useful when you wish to quickly find out what programmes you have recorded on a tape with this recorder. This function allows you to select a programme to watch, and then automatically searches for the start of the programme.

A Load a recorded cassette.

Insert a cassette recorded on this recorder.

B Access the Main Menu screen.

Press MENU.

C Access the Programme Navigation screen.

Press rt to move the highlight bar (pointer) to

“PROGRAMME NAVIGATION”, then press OK or e.

● If “NO TAPE DATA DETECTED” appears on the TV screen, you cannot use the Navigation Playback function.

D Select a programme.

Press rt to move the highlight bar (pointer) to the programme you want to watch.

E Start playback.

Press OK. “SEARCHING” appears on the TV screen. Playback begins automatically after the selected programme is located.

Programme Navigation Screen

ARecording date

BRecording start time* C Station name*

*After entering the programme title ( pg. 37), programme title appears instead of the recording start time and station name.

DCurrently selected programme E Programme title*

*Before entering the programme title ( pg. 37), recording start time and station name appear instead of the programme title.

NOTES:

●If you do not want to use Programme Navigation function, set “PROG. NAVIGATION” to “OFF” ( pg. 48).

●You cannot edit programme title or delete tape data for the cassette with the record safety tab removed.

●Programme Navigation is possible with the cassettes recorded with this recorder only.

●Before recording, make sure the recorder’s clock is set correctly.

●To record the programme information in this recorder’s memory, you must continue to record each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

●Programme Navigation may not work properly depending on the tape being used.

●The programme information is stored in this recorder’s memory. If the memory in this recorder should ever be damaged and the programme information lost, it is impossible to restore that information.

Image 36

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsCheck the contents 10 ENSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up 12 ENSelect the language Confirm/Set video channelPerform Preset Download Set the video channelPress rt to select CH - and press OK or e Set the video channel to off manually. pg14 EN Language for the on-screen displayJust Clock Access the Main Menu screen Access the Country Set screenLanguage Return to the normal screenInstalling Satellite Controller 16 ENSituate the Satellite Controller Attach the Satellite ControllerSetting satellite receivers brand and channel Access the Sat Control Set screenSelect the satellite receiver’s channel for testing Turn on the satellite receiverTV Auto Power On 18 ENNextView Link VCR Auto Standby Direct RecBasic Playback 20 EN Slow MotionPicture Search Pause during playbackVariable Speed Search Index SearchSkip Search Instant Review22 EN Next Function MemoryRepeat Playback Manual TrackingRecording Resume Function Choose a programmeSet the tape speed Start recordingInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming Enter the Showview numberSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode 28 ENExpress Timer Programming Access the Programme screenEnter the programme start time Enter the programme stop timeTo Timer-Record Weekly Or Daily Serials 30 ENVPS/PDC Recording Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel Disengage the timer mode Cancel or change a programmeReturn to the timer mode 32 ENCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording 34 ENWhen inserting a cassette with the record safety tab Intact Navigation36 EN Navigation PlaybackProgramme Navigation Screen Load a recorded cassetteEdit Programme Title Select the programme38 EN Entering CharacterDelete Tape Data Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSelect the input mode Connect the decoderSet the tuner Set L-2 Select to DECODER. pg46 EN Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode setting48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System Access the Auto Channel Set screen Tuner Set52 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel56 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set58 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackSignal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS66 EN Memo