JVC HRS6960E specifications 42 EN, Decoder connector

Page 42

42 EN

EDITING (cont.)

L-2 SELECT and L-2 INPUT Setting

The AV2 (L-2) IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the recorder’s AV2 (L-2) IN/ DECODER connector. Set “L-2 INPUT” to the appropriate mode depending on the output signals of the connected appliance.

Perform steps 1 and 2 of “L-1 OUTPUT and L-1 INPUT Setting” on page 41.

A Select the input mode for the AV2 (L-2) IN/

DECODER connector.

Press rt to move the highlight bar (pointer) to “L-2 SELECT” or “L-2 INPUT”. Then, press OK or e to select the appropriate setting.

*The default setting is bold in the table below.

8L-2 SELECT

A/V: To use this recorder as the recording deck with the player connected to the AV2 (L-2) IN/DECODER connector, or to use the satellite receiver connected to the AV2 (L-2) IN/DECODER connector.

DECODER: To use a decoder connected to the AV2 (L-2) IN/DECODER connector.

SAT: To view a satellite programme with the TV set while the recorder is turned off. ( pg. 43)

8L-2 INPUT

VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

B Return to the normal screen.

NOTES:

●If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/DECODER connector, be sure to set “L-2 SELECT” back to appropriate mode after editing.

●If you are not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/DECODER connector, leave “L-2 SELECT” set to “A/V”.

●The default setting is “A/V”; if the recorder’s memory backup has expired due to a power cut or because the AC was removed from the recorder, “A/V” will be automatically selected when the power is restored to the recorder. If you are using a satellite receiver or a decoder, be sure to set “L-2 SELECT” back to appropriate mode.

●When “L-2 SELECT” is set to “SAT”, “SAT” or “SAt” appears on TV screen or front display panel instead of “L-2”.

●If “L-2 SELECT” is set to “DECODER”, it is impossible to set “L-2 INPUT” to “S-VIDEO”.

●If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set “L-2 SELECT” to “DECODER”.

Press MENU.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TVSelect your country Auto Set UpTurn on the recorder Before starting, make sure of the followingSelect the language Perform Auto Set Up12 EN Confirm/Set video channelPress rt to select CH - and press OK or e Perform Preset DownloadSet the video channel Set the video channel to off manually.  pg14 EN Language for the on-screen displayJust Clock Language Access the Main Menu screenAccess the Country Set screen Return to the normal screenSituate the Satellite Controller Installing Satellite Controller16 EN Attach the Satellite ControllerSelect the satellite receiver’s channel for testing Setting satellite receivers brand and channelAccess the Sat Control Set screen Turn on the satellite receiverNextView Link TV Auto Power On18 EN VCR Auto Standby Direct RecBasic Playback Picture Search 20 ENSlow Motion Pause during playbackSkip Search Variable Speed SearchIndex Search Instant ReviewRepeat Playback 22 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recordingInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Before performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen 28 ENEnter the programme start time Express Timer ProgrammingAccess the Programme screen Enter the programme stop timeVPS/PDC Recording To Timer-Record Weekly Or Daily Serials30 EN Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel Return to the timer mode Disengage the timer modeCancel or change a programme 32 ENSelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 ENWhen inserting a cassette with the record safety tab Intact NavigationProgramme Navigation Screen 36 ENNavigation Playback Load a recorded cassetteEdit Programme Title Select the programmeDelete Tape Data 38 ENEntering Character Delete the tape dataEdit From a CamcorderAnother 40 ENOutput and L-1 Input Setting Output/Input Set B Access the Output/Input Set screenDecoder connector 42 ENConnecting To a Satellite Receiver Simple Connections44 EN Perfect ConnectionsSet the tuner Select the input modeConnect the decoder Set L-2 Select to DECODER.  pg46 EN Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode setting48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System 52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel56 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set58 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackScan system Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Lines VHS66 EN Memo
Top Page Image Contents