JVC HRS6960E specifications Colour System

Page 51

	EN 51
	* The default setting is bold in the table below.

8 COLOUR SYSTEM	You can play back PAL, NTSC and MESECAM tapes, or record PAL and
PAL/NTSC	SECAM* signals on this recorder. Select the appropriate colour system.
MESECAM	* SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the
	designation for tapes with SECAM signals that have been recorded on a
	MESECAM-compatible PAL video cassette recorder.
	PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.
	MESECAM: To record SECAM signals, or play back a MESECAM tape.
	NOTES:
	● It is not possible to record in S-VHS if “MESECAM” is selected. The recording mode
	is forced to change to VHS.
	● If “MESECAM” is selected when the tape speed is set to EP mode, the tape speed will
	be forced to change to LP mode.
	● It is not possible to select EP mode if “MESECAM” is selected.
	About NTSC Playback
	● Some TVs shrink the picture vertically and place black bars at the top and bottom of
	the TV screen. This is not a malfunction on the part of either the video recorder or
	the TV.
	● The picture may roll up and down. This can be corrected using the V-HOLD control
	found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD
	control.)
	● The counter and tape remaining time readings will be incorrect.
	● During search, still, or frame-by-frame playback, the picture will be distorted, and
	there may be a loss of colour.
	● Depending on the type of TV, the top and bottom portions of superimposed displays
	may be cut off during NTSC playback.

AUTO POWER OFF	When this function is set to “3H”, the recorder is turned off automatically if
3H	no operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN”
OFF	appears on the screen 3 minutes before the recorder is turned off.

Image 51

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limitTape Speed SP/LP/EP pg ON-SCREEN Display Remote Control Operating JVC TVs How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderBefore starting, make sure of the following Auto Set UpTurn on the recorder Select your countryConfirm/Set video channel Perform Auto Set Up12 EN Select the languageSet the video channel to off manually. pg Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or e14 EN Language for the on-screen displayJust Clock Return to the normal screen Access the Main Menu screenAccess the Country Set screen LanguageAttach the Satellite Controller Installing Satellite Controller16 EN Situate the Satellite ControllerTurn on the satellite receiver Setting satellite receivers brand and channelAccess the Sat Control Set screen Select the satellite receiver’s channel for testingVCR Auto Standby Direct Rec TV Auto Power On18 EN NextView LinkBasic Playback Pause during playback 20 ENSlow Motion Picture SearchInstant Review Variable Speed SearchIndex Search Skip SearchManual Tracking 22 ENNext Function Memory Repeat PlaybackStart recording Recording Resume FunctionChoose a programme Set the tape speedInstant Timer Recording ITR 24 ENTape Remaining Time Engage the S-VHS ET mode Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes 26 EN PlaybackRecording Enter the Showview number Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer Programming28 EN Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer modeEnter the programme stop time Express Timer ProgrammingAccess the Programme screen Enter the programme start timeEnter the channel position To Timer-Record Weekly Or Daily Serials30 EN VPS/PDC RecordingEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel 32 EN Disengage the timer modeCancel or change a programme Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify34 EN Select the L-2 Select modeRecording mode Programme RecordingNavigation When inserting a cassette with the record safety tab IntactLoad a recorded cassette 36 ENNavigation Playback Programme Navigation ScreenSelect the programme Edit Programme TitleDelete the tape data 38 ENEntering Character Delete Tape DataCamcorder Edit From a40 EN AnotherOutput/Input Set B Access the Output/Input Set screen Output and L-1 Input Setting42 EN Decoder connectorSimple Connections Connecting To a Satellite ReceiverPerfect Connections 44 ENSet L-2 Select to DECODER. pg Select the input modeConnect the decoder Set the tunerMake connections 46 ENSelect the mode setting Mode SetAccess the Mode Set screen Select the mode48 EN On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP modeFor Example 50 EN Colour System Auto Channel Set Access the Auto Channel Set screenTuner Set 52 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled Broadcast56 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set58 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data60 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 62 ENOther Problems Playback 64 ENLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Scan system66 EN Memo