JVC BR-HD50E instruction manual „ HDV 720p and DV format, „ Recording time, „ HD video output

Page 11

„HDV (720p) and DV format

 

HDV 720p format

 

DV format

 

 

 

Video signal *1

60Hz:720/30p, 720/24p, 480/60p

U (NTSC) : 480/60i

 

50Hz:720/25p, 576/50p

 

 

 

E (PAL)

: 576/50i

 

 

 

 

 

Pixel count

1280 × 720

U (NTSC) : 720 × 480

 

720 × 480 (480/60p)

 

 

 

E (PAL)

: 720 × 576

 

720 × 576 (576/50p)

 

 

 

 

 

 

 

Aspect ratio

16:9

4:3 (16:9)

 

 

 

 

 

Video compression

MPEG-2 Video (Profile & level: MP@H-14)

DV

 

format

 

 

 

 

 

 

Bit rate after

About 19 Mbps

About 25 Mbps

compression

 

 

 

 

 

 

Audio compression

MPEG1 Audio Layer II

Linear PCM

format

 

 

 

 

 

 

Audio channels

2CH (48 kHz,16 bit)

2CH (48 kHz,16 bit)

 

 

4CH (32 kHz,12 bit) *2

 

 

 

 

*1 : For HDV/DV signals, the unit records the same signals as the input signals.

*2 : During analog audio input, only CH1/CH2 are recorded.

Viewing video signal display (Example)

720/30p: 720 effective scanlines, 30-frame progressive scan

480/60i: 480 effective scanlines, 60-field interlace scan

„Recording time

The recording/playback speed for HDV format is SP mode only.

Though DV format recording and playback speed has SP and LP modes, this unit supports SP mode only.

The cassette recording time is the same for HDV and DV format.

Standard DV

Recording time

cassettes

 

 

 

LA-DV276

About 276 minutes

 

 

LA-DV186

About 186 minutes

 

 

LA-DV124

About 124 minutes

 

 

Mini DV cassettes

Recording time

 

 

M-DV63PRO

About 63 minutes

 

 

M-DV63HD

About 63 minutes

 

 

„HD video output

HD video is output from the HDMI OUT terminal and the COMPONENT OUT terminal.

HDMI OUT terminal : Outputs HD/SD digital video and digital audio.

This is connected to a monitor with an HDMI terminal. (HDMI : High Definition Multimedia Interface)

COMPONENT OUT terminal: Outputs HD/SD analog video. Does not output audio.

This is connected to an HD-compatible monitor with COMPONENT input terminal.

zThe video format to output from the HDMI OUT terminal and the COMPONENT OUT terminal can be selected using OUT FORMAT [60]/OUT FORMAT [50] in the VIDEO Menu screen.

E-7

Image 11
Contents For Customer Use BR-HD50Important Safeguards Information for Canada Renseignement Pour Canada InformationRemarque Business users Other Countries outside the European Union Port Cable LengthEuropean Union For Continental EUROPE, ETC For U.K. only Power SystemFor Your Safety Please Read the Following Text Carefully Must be EarthedCompatible mechanism for standard/mini DV cassettes Compatible with 60Hz/50Hz HD signal for- matHDV 720p format Compatible with DV formatTable of Contents Remarks of usage IntroductionLA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124 Cassette tape„ Erasure prevention Standard DV cas- z Mini DV cassettes settesHDV and DV format „ HDV and DV signal input/output„ HD signal format „ HD video output „ HDV 720p and DV format„ Recording time „ Head cleaning Regular maintenance„ Regular maintenance Ment Cleaning tapeCondensation Operating environ3EJECT button Names and Functions of Parts1Cassette loading slot/LED 2OPERATE button/LED„ Stop button/LED „ Play button/LED„ Pause button/LED „ FF button/LED7COUNTER switch 5REMOTE/LOCAL switch 6INPUT Select switch„ 50 indicator light 8IEEE1394 IEEE1394 terminal switch„ Dvcam indicator light „ 60 indicator lightEMENU button FRESET buttonHSpecial functions/Setting buttons Setting screens„ SET button „ BLANK/P button„ SEARCH+/S button „ SEARCH-/Q buttonRear panel 2VIDEO Y/C in terminal 4-PIN3VIDEO Line OUT terminal BNC 7CH2 Audio in terminal RCA 0HDMI OUT Hdmi signal output termi- nal5COMPONENT OUT Component sig- nal output terminal BNC×3 6CH1 Audio in terminal RCAAIEEE1394 IEEE1394 terminal 6P BDC power input terminalCDC power cord clamp DSIGNAL GND terminalHSlot cover for servicing ESERIAL Remote terminal mini jackFREMOTE RS-422A terminal D-SUB 9P GFanON-SCREEN Display Output CH „ DV format„ HDV format Sampling frequency/audioOr Stop mode, it displays the data of the built-in clock When the unit is in the Analog/HDV Signal RecordingDate/time It displays the date and time HrmmssRemaining tape VCR operation modeCounter display Display Description Event/Alarm displayDisplay displayed during operation Description Display displayed for about 3 seconds DescriptionNAL Copy Inhibit Invalid TapeLP Tape No HDV/DV SIGConnection „ Input signal„ Output signal Digital input IEEE1394 terminal 6P Connecting audio signalsAudio in terminal RCA×2 Connect an audio cable Attaching the supplied ferrite core Connecting with Serial Remote terminals „ Operate BR-HD50 with the wired remote controllerTo the DC cord. XPage Model RECORDING/OUTPUT Signal FormatInputting analog signal Component OUTHDV Inputting digital signalHD signal Input Hdmi OUT terminal Line OUT terminalIEEE1394 Hdmi OUT terminal „ Output terminal video/audio signal format during playbackVideo HD signal Playback„ Turn off BR-HD50 Turning on the powerTurning off the power Preparation„ Turning on the Operation Lock mode Selecting the operating method main unit/remote controllerOperation Lock mode „ Setting the REMOTE/LOCAL switchEjecting the cassette tape Loading the cassette tapeTC/UB/CLOCK 2/2 Menu screen Setting date and timeSetting/Displaying date and time Setting the date and time in the Clock Adjust Menu screen„ Display Menu screen Selecting date/time displayOn-screen status display Display the System 2/2 Menu screen Check settingsSetting the Menu screen Selecting HD signal formatRecording Setting Menu screensSettings for digital signal input Selecting input signal„ Selecting digital input signal „ Settings for digital video format„ Settings for recording the time code Setting related Menu screen„ Setting System Menu screen „ Increasing the recording level SettingsAdjusting audio recording level Adjusting audio recording levelAudio recording level is fixed to the initial setting value „ Adjusting the CH1 channel„ Adjusting the CH2 channel Recording index signals Recording begins on the source unit „ For using GY-DV5000/DV5100 as the source unitNo backup recording OFFRemote 2/2 Menu screen Recording with Serial Remote terminalsRemote SEL SER Remote 1/2 Menu screenPlayback Video settingsSettings regarding playback function Audio settingsFast forward/rewind System 1/2 Menu screen Frame-advance playback„ STL/F. ADV DV in the System 1/2 Menu screen Special playback functions„ HDV recorded tape playback Slow playback and Search modeSet BR-HD50 to the Playback or the Still mode „ DV recorded tape playbackSearch function Index searchBlank search „ In the Stop mode, press the Blank buttonIf the head is dirty, repeat play- back may not work well „ Repeat Mode in the System 1/2 Menu screenRepeat playback Index repeat playbackMulti cue-up For details on time code setting and recording XPageRegistering cue-up points Clearing registered cue-up points2Press the R or P button again to change the time- code Changing cue-up pointsExiting the Multi Cue-up screen Searching cue-up pointsChecking the data of time code generator Time CodeDisplaying the time code During DV inputSetting is preset to the time code generator „ Set TCG Select to PresetPresetting the time code Setting ...TC/UB/CLOCK 1/2 Menu screen„ Set the TC/UB/CLOCK 1/2 Menu as follows Recording from preset dataTCG Select Preset Preset time codeCheck the time code of the IEEE1394 terminal Counter mode display shows either TCR or UBRSelect the Recording mode TCG Select RegenPlaying back the time code Set the Counter switch to TC or UBPress the Play button to go to the Playback mode Counter switch„ Remote 2/2 Menu screen Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals EditTOP Menu screen „ Set BR-HD50 to the Stop or Still modeSetting the menus Menu ScreensSetting on the monitor display is flashing Counter display shows menu code numbers when setting menusNo settings are selected yet SettingSystem 1/2 menu Structure of the Menu screens„ System 1/2 Menu screens TOP Menu screenSystem Menu screens 3MIN Repeat ModeLong Pause 1MIN„ System 2/2 Menu Remote Menu screens PB Start DelayREM FF/REW REM Stop SELAudio Menu Screen OUT Format Video Menu ScreenMonitor SelectLetter OUT forDown Conv DVI Color Hdmi ModeTest Signal UP Conv„ TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screensDate MM/DD/YY Adjust„ TC/UB/CLOCK 2/2 Menu screen ClockDisplay Menu screen Others „ Alarm display Displayed regardless of the Display mode„ Warning display Displayed regardless of the Display mode Unable to record Troubleshooting Symptom Action No powerAfter the REMOTE/LOCAL switch Recorded during DV signal inputDisplay on the monitor No HD signal is output fromNo signal is output from Hdmi OUT or Component OUTPress the Menu button to return to the normal screen „ Set BR-HD50 to the Stop modeChecking the hour meter System 1/2 Menu screen is displayed„ Video „ Connectors„ Accessories „ General„ External dimensions Unit mm Supplement Important Safety Instructions„ AC adapter section