JVC BR-HD50E instruction manual Counter display, VCR operation mode, Remaining tape

No.	Item					Description
3	Counter display	Displays the CTL counter, time code or user’s bit. The dis-
		played contents can be selected using the COUNTER switch.
		•	CTL counter:			It will be displayed if the COUNTER switch
						is set to CTL. The counter shows a 7-digit
						number (hour, minute, second and frame)
						with + or – and “CTL” at the beginning, e.g.,
						CTL-9:30:20:10
		•	Time code :			It will be displayed if the COUNTER switch
						is set to TC. The time code shows an 8-digit
						number (hour, minute, second and frame).
						At playback, the time codes recorded on the
						tape are displayed.
						The prefix indicates the time code mode.
		TCG		:	Time code generator data
		TCR		:	Time code reader data
		DTCG: Time code data received from the IEEE1394 terminal
					(In DV mode)

Depending on the framing mode, the symbols for the seconds and frames are different (only for NTSC).

00 : 00 : 00	:	00	Dot (.) for the drop frame mode
			Colon (:) for the non-drop frame mode

• User’s bit : it will be displayed if the COUNTER switch is set to UB.

The user’s bit is an 8-digit number (each digit is a number or character from 0 – F). The prefix indicates the user’s bit mode.

UBG : User’s bit generator data

UBR : User’s bit reader data

DUBG: User’s bit reader data received from the IEEE1394 terminal (In DV mode)

					Memo
				z		of the counter display can be changed with
					The position
					COUNTER POSI in the DISPLAY Menu screen.
				z The counter display can be turned on/off with TIME CODE
					in the DISPLAY Menu screen.
4	VCR operation mode			Displays the VCR operation mode, including:
				PLAY, EJECT, FF, REW, STANDBY-ON, STANDBY-OFF,
				STILL, REC, REC PAUSE, SHTL (shuttle search), JOG,
				BLANK SRH (blank search), NO CASSETTE (cassette tape
				not loaded), OPERATE OFF.
				For SHTL and JOG, the speed is also displayed.
				• The display can be turned on/off with VTR MODE in the
					DISPLAY Menu screen.
5	Remaining tape			Displays the remaining time of tape (minutes).
				Not displayed when the remaining time is being confirmed.
		Memo
	If		display position	• The display can be turned on/off with TAPE REMAIN in the
		the counter
	is set to the upper right, this				DISPLAY Menu screen.
				• The SP display disappears when a DVCAM cassette tape
	item will be displayed on the				is being played back.
	lower right.
				• This remaining tape time display is only for reference.

E-23