JVC BR-HD50E instruction manual To the DC cord. XPage

Page 35

CONNECTION

Connecting the AC adapter

Connect the supplied AC adapter to BR-HD50.

1. Clamp

 

Screw

3. Clamp

 

Supplied AC adapter

 

 

DC IN terminal

 

4.

DC cord

2.

Supplied power cord

 

 

Supplied ferrite core

 

5.

 

OPERATE indicator

 

 

„ Always attach the supplied ferrite core

 

 

 

to the DC cord. (XPage 29)

OPERATE

 

 

1. Remove one screw on the back panel of the

 

 

unit, and remove the DC cord clamp.

button

 

 

 

 

 

2. Connect the DC cord of the AC adapter to

 

 

 

the DC IN terminal of BR-HD50.

 

 

 

3. To prevent accidental disconnection of the

 

 

 

DC cord, insert the DC cord into the clamp,

 

 

 

orient the clamp as shown in the figure

Memo

 

 

above, and secure the clamp to the unit.

 

 

Use the screw removed in step 1 above to

z Even in the OPERATE OFF mode, a small

secure the clamp to the unit.

amount of electricity will still flow into the unit.

4. Connect the supplied power cord to the AC

z When the unit is in the OPERATE OFF mode,

IN terminal of the AC adapter.

no operation can be performed except that of

5. Connect the power cord to the power out-

the OPERATE buttons and cassette loading/

let.

ejecting.

• BR-HD50 is turned on and the OPERATE

 

 

indicator lights up in red.

 

(OPERATE OFF mode)

 

• If DC IN MODE of the SYSTEM [2/2] Menu

 

screen is set to “OPE ON”, the OPERATE

 

indicator will light up in green.

 

(OPERATE ON mode)

Note

zSupply power to BR-HD50 using the supplied AC adapter. Do not use other power sources.

zDo not unplug the DC cord and/or the power cord during recording or playback.

zIf the supply voltage is low, an alarm display of “LOW VOLTAGE” is shown.

LOW VOLTAGE

Alarm message

E-31

Page 34 Page 36
Image 35
Page 34 Page 36
Contents For Customer Use BR-HD50Important Safeguards Information for Canada Renseignement Pour Canada InformationRemarque Business users Other Countries outside the European Union Port Cable LengthEuropean Union For Continental EUROPE, ETC For U.K. only Power SystemFor Your Safety Please Read the Following Text Carefully Must be EarthedCompatible mechanism for standard/mini DV cassettes Compatible with 60Hz/50Hz HD signal for- matHDV 720p format Compatible with DV formatTable of Contents Remarks of usage IntroductionLA-DV276M-DV63PRO LA-DV186M-DV63HD LA-DV124 Cassette tape„ Erasure prevention Standard DV cas- z Mini DV cassettes settesHDV and DV format „ HDV and DV signal input/output„ HD signal format „ HD video output „ HDV 720p and DV format„ Recording time „ Head cleaning Regular maintenance„ Regular maintenance Ment Cleaning tapeCondensation Operating environ3EJECT button Names and Functions of Parts1Cassette loading slot/LED 2OPERATE button/LED„ Stop button/LED „ Play button/LED„ Pause button/LED „ FF button/LED7COUNTER switch 5REMOTE/LOCAL switch 6INPUT Select switch„ 50 indicator light 8IEEE1394 IEEE1394 terminal switch„ Dvcam indicator light „ 60 indicator lightEMENU button FRESET buttonHSpecial functions/Setting buttons Setting screens„ SET button „ BLANK/P button„ SEARCH+/S button „ SEARCH-/Q buttonRear panel 2VIDEO Y/C in terminal 4-PIN3VIDEO Line OUT terminal BNC 7CH2 Audio in terminal RCA 0HDMI OUT Hdmi signal output termi- nal5COMPONENT OUT Component sig- nal output terminal BNC×3 6CH1 Audio in terminal RCAAIEEE1394 IEEE1394 terminal 6P BDC power input terminalCDC power cord clamp DSIGNAL GND terminalHSlot cover for servicing ESERIAL Remote terminal mini jackFREMOTE RS-422A terminal D-SUB 9P GFanON-SCREEN Display Output CH „ DV format„ HDV format Sampling frequency/audioOr Stop mode, it displays the data of the built-in clock When the unit is in the Analog/HDV Signal RecordingDate/time It displays the date and time HrmmssRemaining tape VCR operation modeCounter display Display Description Event/Alarm displayDisplay displayed during operation Description Display displayed for about 3 seconds DescriptionNAL Copy Inhibit Invalid TapeLP Tape No HDV/DV SIGConnection „ Input signal„ Output signal Digital input IEEE1394 terminal 6P Connecting audio signalsAudio in terminal RCA×2 Connect an audio cable Attaching the supplied ferrite core Connecting with Serial Remote terminals „ Operate BR-HD50 with the wired remote controllerTo the DC cord. XPage Model RECORDING/OUTPUT Signal FormatInputting analog signal Component OUTHDV Inputting digital signalHD signal Input Hdmi OUT terminal Line OUT terminalIEEE1394 Hdmi OUT terminal „ Output terminal video/audio signal format during playbackVideo HD signal Playback„ Turn off BR-HD50 Turning on the powerTurning off the power Preparation„ Turning on the Operation Lock mode Selecting the operating method main unit/remote controllerOperation Lock mode „ Setting the REMOTE/LOCAL switchEjecting the cassette tape Loading the cassette tapeTC/UB/CLOCK 2/2 Menu screen Setting date and timeSetting/Displaying date and time Setting the date and time in the Clock Adjust Menu screen„ Display Menu screen Selecting date/time displayOn-screen status display Display the System 2/2 Menu screen Check settingsSetting the Menu screen Selecting HD signal formatRecording Setting Menu screensSettings for digital signal input Selecting input signal„ Selecting digital input signal „ Settings for digital video format„ Settings for recording the time code Setting related Menu screen„ Setting System Menu screen „ Increasing the recording level SettingsAdjusting audio recording level Adjusting audio recording levelAudio recording level is fixed to the initial setting value „ Adjusting the CH1 channel„ Adjusting the CH2 channel Recording index signals Recording begins on the source unit „ For using GY-DV5000/DV5100 as the source unitNo backup recording OFFRemote 2/2 Menu screen Recording with Serial Remote terminalsRemote SEL SER Remote 1/2 Menu screenPlayback Video settingsSettings regarding playback function Audio settingsFast forward/rewind System 1/2 Menu screen Frame-advance playback„ STL/F. ADV DV in the System 1/2 Menu screen Special playback functions„ HDV recorded tape playback Slow playback and Search modeSet BR-HD50 to the Playback or the Still mode „ DV recorded tape playbackSearch function Index searchBlank search „ In the Stop mode, press the Blank buttonIf the head is dirty, repeat play- back may not work well „ Repeat Mode in the System 1/2 Menu screenRepeat playback Index repeat playbackMulti cue-up For details on time code setting and recording XPageRegistering cue-up points Clearing registered cue-up points2Press the R or P button again to change the time- code Changing cue-up pointsExiting the Multi Cue-up screen Searching cue-up pointsChecking the data of time code generator Time CodeDisplaying the time code During DV inputSetting is preset to the time code generator „ Set TCG Select to PresetPresetting the time code Setting ...TC/UB/CLOCK 1/2 Menu screen„ Set the TC/UB/CLOCK 1/2 Menu as follows Recording from preset dataTCG Select Preset Preset time codeCheck the time code of the IEEE1394 terminal Counter mode display shows either TCR or UBRSelect the Recording mode TCG Select RegenPlaying back the time code Set the Counter switch to TC or UBPress the Play button to go to the Playback mode Counter switch„ Remote 2/2 Menu screen Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals EditTOP Menu screen „ Set BR-HD50 to the Stop or Still modeSetting the menus Menu ScreensSetting on the monitor display is flashing Counter display shows menu code numbers when setting menusNo settings are selected yet SettingSystem 1/2 menu Structure of the Menu screens„ System 1/2 Menu screens TOP Menu screenSystem Menu screens 3MIN Repeat ModeLong Pause 1MIN„ System 2/2 Menu Remote Menu screens PB Start DelayREM FF/REW REM Stop SELAudio Menu Screen OUT Format Video Menu ScreenMonitor SelectLetter OUT forDown Conv DVI Color Hdmi ModeTest Signal UP Conv„ TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screensDate MM/DD/YY Adjust„ TC/UB/CLOCK 2/2 Menu screen ClockDisplay Menu screen Others „ Alarm display Displayed regardless of the Display mode„ Warning display Displayed regardless of the Display mode Unable to record Troubleshooting Symptom Action No powerAfter the REMOTE/LOCAL switch Recorded during DV signal inputDisplay on the monitor No HD signal is output fromNo signal is output from Hdmi OUT or Component OUTPress the Menu button to return to the normal screen „ Set BR-HD50 to the Stop modeChecking the hour meter System 1/2 Menu screen is displayed„ Video „ Connectors„ Accessories „ General„ External dimensions Unit mm Supplement Important Safety Instructions„ AC adapter section
Top Page Image Contents